ADS数据的处理和显示

基于航空卫星通信的飞行监视,即自动相关监视（ADS）,是航空卫星移动业务（AMSS）通信应用新领域,是建立在航空卫星通信基础上的一种新的飞行监视技术。该文介绍了基本ADS报告信息电文的组成及各部分的含义,着重阐述将所收到的ADS数据进行处理,并以直观易懂的表格及图象形式显示出来,便于确切地知道飞机的四维位置（纬度、经度、高度和时间）。     

催化点火器高空点火性能的实验研究

介绍国产催化点火器高空点火性能模拟试验,主气流温度为５００℃左右、加力室压力为０．０４—０．１２ＭＰａ,对催化点火器的着火延迟时间和贫富油点火极限进行了测量。试验结果表明：当飞行高度为１７０００—１７５００ｍ,飞行马赫数Ｍａ＝１．０时,催化点火器可以正常点燃某型发动机加力燃烧室。     

基于非交错有限体积格式和 k-ω 湍流模型模拟叶栅湍流分离流动

发展了一种求解任意坐标系下二维Ｎ－Ｓ方程的非交错有限体积法和一种高阶ＴＶＤ对流格式。采用一种ｋ－ω湍流模型和几种不同的ｋ－ω模型对叶栅湍流分离流动进行了详细的分析。数值结果与得到的实验结果比较表明,此方法不仅精度高,而且具有较好的数值稳定性。     

点火升压阶段药柱裂纹变形研究

利用流固耦合软件MPCCI将FLUENT和ABAQUS连接,计算了固体发动机点火升压阶段燃烧室流场与药柱裂纹变形情况.FLUENT计算耦合区域作用在固体边界上的力,以节点量的形式传给MPCCI,MPCCI将节点量进行插值传给ABAQUS,ABAQUS得到外加载荷,计算耦合区域作用在流场上的节点位移,再通过MPCCI插值后传给FLUENT.计算结果表明,在燃气流入裂纹初期,在裂纹尖端形成相对封闭空间,造成裂纹内压强上升,反射激波引起裂纹尖端更高的升压速率,同时在裂纹尖端形成应力集中,为裂纹动态扩展提供了可能.     

基于蒙特卡罗法的航空发动机空气系统稳态算法优化

针对目前航空发动机空气系统稳态算法中收敛性依赖初值的问题,将蒙特卡罗方法与流体网络法综合应用到空气系统可压缩流体一维网络计算中,提出了一种新的计算方法Monte Carlo-Fluid Network（MC-FN）。该方法将空气系统简化为由节点和元件组成的网络,借助蒙特卡罗方法获得空气系统内各节点压力分配,再根据空气系统中各元件流阻特性和换热特性计算流量、温度。计算中通过将游动次数比较少的蒙特卡罗方法的计算结果作为流量残差法节点压力、温度的初始值,实现快速求得精确收敛解。与流量残差算法相比,MC-FN方法计算精度不变,收敛速度提升了66.5%;与线性求解法相比,MC-FN方法的计算精度提升了25.2%,收敛速度提升了43.8%。     

Detection of aerosol pollution sources during sandstorms in Northwestern China using remote sensed and model simulated data

The present paper has used a comprehensive approach to study atmosphere pollution sources including the study of vertical distribution characteristics, the epicenters of occurrence and transport of atmospheric aerosol in North-West China under intensive dust storm registered in all cities of the region in April 2014. To achieve this goal, the remote sensing data using Moderate Resolution Imaging Spectroradiometer satellite (MODIS) as well as model-simulated data, were used, which facilitate tracking the sources, routes, and spatial extent of dust storms. The results of the study have shown strong territory pollution with aerosol during sandstorm. According to ground-based air quality monitoring stations data, concentrations of PM₁₀ and PM_2.5 exceeded 400?μg/m³ and 150?μg/m³, respectively, the ratio PM_2.5/PM₁₀ being within the range of 0.123–0.661. According to MODIS/Terra Collection 6 Level-2 aerosol products data and the Deep Blue algorithm data, the aerosol optical depth (AOD) at 550?nm in the pollution epicenter was within 0.75–1. The vertical distribution of aerosols indicates that the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) 532?nm total attenuates backscatter coefficient ranges from 0.01 to 0.0001?km^?1?×?sr^?1 with the distribution of the main types of aerosols in the troposphere of the region within 0–12.5?km, where the most severe aerosol contamination is observed in the lower troposphere (at 3–6?km). According to satellite sounding and model-simulated data, the sources of pollution are the deserted regions of Northern and Northwestern China.     

Civil unmanned aircraft system operation in national airspace: A survey from Air Navigation Service Provider perspective

Unmanned Aircraft Systems (UASs) have advanced technologically and surged exponentially over recent years. Currently, due to safety concerns, most civil operations of UAS are conducted in low-level uncontrolled area or in segregated controlled airspace. As the industry progresses, both operational and technological capabilities have matured to the point where UASs are expected to gain greater freedom of access to both controlled and uncontrolled airspace. Extensive technical and regulatory surveys have been conducted to enable the expanded operations. However, most surveys are derived from the perspective of UAS own operating mechanism and barely consider interactions of their non-segregated activities with the Air Traffic Management (ATM) system. Hence, to fill the gap, this paper presents a survey conducted from the perspective of Air Navigation Service Provider (ANSP), which serves to accommodate these new entrants to the overall national airspace while continuing flight safety and efficiency. The primary objectives of this paper are to: (A) describe what typical ANSP-supplied UAS Traffic Management (UTM) architecture is required to facilitate all types of civil UAS operations; (B) identify three major ANSP considerations on how UAS can be accommodated safely in civil airspace; (C) outline future directions and challenges related with UAS operations for the ANSP.     

活塞发动机高空最小点火能量计算及试验

根据原型机结构,应用AVL BOOST建立了航空活塞式发动机的一维仿真模型,通过地面特性仿真计算与试验研究,验证了发动机仿真模型的可行性和正确性;在深入分析可燃混合气燃烧机理基础上,建立了发动机最小点火能量计算数学模型;在此基础上,采用AVL BOOST与MATLAB联合仿真的方法,计算了发动机在不同高空、不同空燃比稳定运行工况下的最小点火能量,得出不同高空最小点火能量MAP图,并进行了试验验证,结果表明,所建立的最小点火能量的仿真计算模型是正确可行的,能够满足后续性能预测与研究的要求.      

固体发动机点火燃气流动与药柱变形耦合过程数值模拟(英文)

采用MpCC I耦合器作为FLUENT和ANSYS的数据交换平台,对带径向翼槽大长径比固体发动机点火过程中的流固耦合现象进行了数值模拟。结果表明,该型发动机点火瞬间燃气流动与药柱变形强烈耦合,药柱变形主要发生在径向翼槽台阶的尖点处,且随点火过程的推进变形加剧;中间翼槽尖点处药柱的变形量比头部翼槽处大,是造成发动机点火故障的主要原因。计算获得了点火压力冲击下药柱的位移及应力场的分布规律,文中的研究结果可为流固耦合技术在固体发动机上的应用奠定一定的基础。     

空气预冷发动机及微小通道流动传热研究综述

首先针对发动机空气预冷系统的特点,将现有的预冷机制分为四种类型,包括燃料预冷、质量喷注预压缩冷却、燃料预冷和质量喷注预压缩冷却组合预冷以及其他流体预冷,并分别介绍了每种预冷机制的代表性发动机循环以及技术特点。调研发现,微小通道结构的预冷器具有很高的散热能力和紧凑度,优势显著。英国Skylon空天飞机的预冷却组合循环发动机（SABRE）其微通道结构预冷器具有极高换热能力。对SABRE的预冷器及相关研究进行详细分析,强调微小通道强化换热对提高发动机性能的重要作用。通过对微小通道中单相气态流动换热研究的调研发现,微尺度流动传热机理仍存在诸多分歧,理论发展不完善,需要深入开展微小通道强化传热研究,尤其对于高速高内外温差条件下微小尺度复杂结构空间内流动传热机理需要深入探索。