ADS数据的处理和显示

基于航空卫星通信的飞行监视,即自动相关监视（ADS）,是航空卫星移动业务（AMSS）通信应用新领域,是建立在航空卫星通信基础上的一种新的飞行监视技术。该文介绍了基本ADS报告信息电文的组成及各部分的含义,着重阐述将所收到的ADS数据进行处理,并以直观易懂的表格及图象形式显示出来,便于确切地知道飞机的四维位置（纬度、经度、高度和时间）。     

基于非交错有限体积格式和 k-ω 湍流模型模拟叶栅湍流分离流动

发展了一种求解任意坐标系下二维Ｎ－Ｓ方程的非交错有限体积法和一种高阶ＴＶＤ对流格式。采用一种ｋ－ω湍流模型和几种不同的ｋ－ω模型对叶栅湍流分离流动进行了详细的分析。数值结果与得到的实验结果比较表明,此方法不仅精度高,而且具有较好的数值稳定性。     

基于蒙特卡罗法的航空发动机空气系统稳态算法优化

针对目前航空发动机空气系统稳态算法中收敛性依赖初值的问题,将蒙特卡罗方法与流体网络法综合应用到空气系统可压缩流体一维网络计算中,提出了一种新的计算方法Monte Carlo-Fluid Network（MC-FN）。该方法将空气系统简化为由节点和元件组成的网络,借助蒙特卡罗方法获得空气系统内各节点压力分配,再根据空气系统中各元件流阻特性和换热特性计算流量、温度。计算中通过将游动次数比较少的蒙特卡罗方法的计算结果作为流量残差法节点压力、温度的初始值,实现快速求得精确收敛解。与流量残差算法相比,MC-FN方法计算精度不变,收敛速度提升了66.5%;与线性求解法相比,MC-FN方法的计算精度提升了25.2%,收敛速度提升了43.8%。     

Detection of aerosol pollution sources during sandstorms in Northwestern China using remote sensed and model simulated data

The present paper has used a comprehensive approach to study atmosphere pollution sources including the study of vertical distribution characteristics, the epicenters of occurrence and transport of atmospheric aerosol in North-West China under intensive dust storm registered in all cities of the region in April 2014. To achieve this goal, the remote sensing data using Moderate Resolution Imaging Spectroradiometer satellite (MODIS) as well as model-simulated data, were used, which facilitate tracking the sources, routes, and spatial extent of dust storms. The results of the study have shown strong territory pollution with aerosol during sandstorm. According to ground-based air quality monitoring stations data, concentrations of PM₁₀ and PM_2.5 exceeded 400?μg/m³ and 150?μg/m³, respectively, the ratio PM_2.5/PM₁₀ being within the range of 0.123–0.661. According to MODIS/Terra Collection 6 Level-2 aerosol products data and the Deep Blue algorithm data, the aerosol optical depth (AOD) at 550?nm in the pollution epicenter was within 0.75–1. The vertical distribution of aerosols indicates that the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) 532?nm total attenuates backscatter coefficient ranges from 0.01 to 0.0001?km^?1?×?sr^?1 with the distribution of the main types of aerosols in the troposphere of the region within 0–12.5?km, where the most severe aerosol contamination is observed in the lower troposphere (at 3–6?km). According to satellite sounding and model-simulated data, the sources of pollution are the deserted regions of Northern and Northwestern China.     

Civil unmanned aircraft system operation in national airspace: A survey from Air Navigation Service Provider perspective

Unmanned Aircraft Systems (UASs) have advanced technologically and surged exponentially over recent years. Currently, due to safety concerns, most civil operations of UAS are conducted in low-level uncontrolled area or in segregated controlled airspace. As the industry progresses, both operational and technological capabilities have matured to the point where UASs are expected to gain greater freedom of access to both controlled and uncontrolled airspace. Extensive technical and regulatory surveys have been conducted to enable the expanded operations. However, most surveys are derived from the perspective of UAS own operating mechanism and barely consider interactions of their non-segregated activities with the Air Traffic Management (ATM) system. Hence, to fill the gap, this paper presents a survey conducted from the perspective of Air Navigation Service Provider (ANSP), which serves to accommodate these new entrants to the overall national airspace while continuing flight safety and efficiency. The primary objectives of this paper are to: (A) describe what typical ANSP-supplied UAS Traffic Management (UTM) architecture is required to facilitate all types of civil UAS operations; (B) identify three major ANSP considerations on how UAS can be accommodated safely in civil airspace; (C) outline future directions and challenges related with UAS operations for the ANSP.     

不同重力条件下单气泡池沸腾现象的数值研究

对不同重力条件下常压饱和水中单气泡池沸腾现象的气泡生长过程及传热特性进行了数值模拟. 采用简化的润滑流模型计算生长气泡底部微液膜的贡献, 而其他宏观区域的气液两相介质则用连续界面模型统一处理. 气液界面形状和加热面上接触线的运动分别采用Level Set方法和固定的表观接触角来近似刻画. 计算结果表明, 气泡生长过程中, 当量直径近似与生长时间的1/3～1/2次方成正比, 重力对相关趋势的影响不大, 但强烈影响着气泡脱落直径和生长时间, 其中脱落直径反比于重力的1/3次方, 生长时间反比于重力的4/5次方. 在固定的核化点数密度条件下, 加热面平均热流密度近似与壁面过热度的3/2次方成正比, 该趋势并不随重力的减弱而改变.      

气液鼓泡床反应器中气泡行为光纤探针测量方法

本文分别采用电导探针和光纤探针测量气液鼓泡床反应器中的气含率、气泡速率和气泡弦长等气泡行为,结果表明光纤探针对气泡具有响应迅速、阶跃显著的特点。将光纤探针信号进行方波化处理,探针在气相中的采样点数与总采样点数之比即为局部气含率,再沿径向积分可得平均气含率,以压差法测得的平均气含率为基准,光纤探针比电导探针准确性更高。将改造后的光纤探针应用于高温、高压、液相为有机体系的气液鼓泡床反应器,测得该反应器的气含率呈中心及边壁低、0.4倍半径处最大的抛物形分布。因此,开发的光纤探针可用于高温、高压、液相有机体系中气泡行为的测量。     

微细丝上气泡射流间的相互作用特性

实验考察微细加热丝上气泡射流间的相互作用现象,发现相邻气泡射流间的相互吸引现象,强相互作用时多股射流可以合并成一股射流.分析揭示出气泡射流间相互吸引的物理机制在于,气泡生长造成局部温度下降导致相邻气泡两侧的热毛细力不均衡,进而引起两个气泡射流间的相互吸引,而相邻气泡则有互相远离的趋势.利用数值模拟给出了气泡射流系统的温度场和流场,很好地验证气泡射流间相互吸引的物理机制.      

空气预冷发动机及微小通道流动传热研究综述

首先针对发动机空气预冷系统的特点,将现有的预冷机制分为四种类型,包括燃料预冷、质量喷注预压缩冷却、燃料预冷和质量喷注预压缩冷却组合预冷以及其他流体预冷,并分别介绍了每种预冷机制的代表性发动机循环以及技术特点。调研发现,微小通道结构的预冷器具有很高的散热能力和紧凑度,优势显著。英国Skylon空天飞机的预冷却组合循环发动机（SABRE）其微通道结构预冷器具有极高换热能力。对SABRE的预冷器及相关研究进行详细分析,强调微小通道强化换热对提高发动机性能的重要作用。通过对微小通道中单相气态流动换热研究的调研发现,微尺度流动传热机理仍存在诸多分歧,理论发展不完善,需要深入开展微小通道强化传热研究,尤其对于高速高内外温差条件下微小尺度复杂结构空间内流动传热机理需要深入探索。     

六自由度气浮台及其姿态平台自动平衡系统设计

针对卫星交会对接中相对姿态和位置的控制问题,设计一种6自由度（DOF）气浮台,并推导出描述两个气浮台模拟卫星交会对接运动的耦合6自由度(DOF)动力学模型。为解决气浮台模拟空间失重环境中的重力力矩干扰问题,设计一种基于应用新颖的快速非奇异终端滑模面的自适应有限时间控制器的自动平衡系统,估计出质心位置,通过控制三个平衡质量块补偿姿态平台质心与旋转中心之间的位置偏差。李雅普诺夫理论推导和仿真结果表明,该方法可以快速完成对姿态平台质心位置的准确估计,实现质心与旋转中心的高度重合。