基于查表的开环MPM预失真器

提出了一种基于查表的开环记忆多项式模型(MPM,Memory Polynomial Model)预失真器.从MPM预失真器系数估计和执行信号预失真处理两方面加以考虑.首先,利用预失真器和高功率放大器(HPA,High Power Amplifier)传输特性的互补性,由采集到的HPA输入、输出基带数据进行单次最小二乘估计得到MPM预失真器的系数,避免了以往递归结构的收敛性和计算量大等问题.然后,利用MPM预失真器的特点,建立了基于输入信号强度索引的一维向量表,通过查表实现MPM预失真器的幂次累加项,极大地减少了实现预失真器所需的计算量及硬件开销.仿真显示,采用提出的预失真器可以有效补偿HPA对信号的记忆非线性失真,有效带宽内获得了近20 dB的功率改善,也显著改善了系统误码性能.     

太阳电池阵列模拟器计量测试方法研究

对太阳电池阵列模拟器(SAS)的设计原理和技术要求进行了分析,并根据分析结果对太阳电池阵列模拟器计量测试方法进行了研究。     

机载用电设备的供电适应性试验系列标准制定与实施

机载用电设备的供电适应性试验是对各类机载用电设备在各种供电状态下的性能以及用电设备工作对供电系统影响的验证，是保证用电设备（尤其是大功率电子设备）与飞机供电系统相兼容的重要措施和方法。本文阐明了我国机载用电设备的供电适应性试验系列标准的组成和相互关系，着重对供电适应性试验方法标准的定位、框架、结构要素的确定和主要内容进行了分析，并提出实施供电适应性方法标准的建议。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

Mathematical description of the NaK model for MASTER-2005

The release of NaK droplets has been modeled for the new version of the European Meteoroid and Space Debris Terrestrial Environment Reference model MASTER-2005. Previously published versions of the model have been revised. The parameters of the model are introduced and discussed. NaK droplets consist of eutectic sodium–potassium alloy and have been released during RORSAT reactor core ejections. They contributed to the space debris environment in the centimeter and millimeter size regime. Sixteen nuclear powered RORSATs launched between 1980 and 1988 activated a reactor core ejection system in Sufficiently High Orbits (SHO), mostly between 900 and 950 km altitude. The core ejection caused an opening of the primary coolant circuit. The liquid coolant has been released into space during these core ejections. The outflow is considered as a discrete event for each of the sixteen core ejections in total. The NaK coolant has been forming droplets up to a diameter of 5.5 cm. NaK releases are restricted to a very narrow region near 65° inclination. This paper gives the parameters of the NaK release model as it is implemented in MASTER-2005. The quantitative values of all model parameters including characteristic diameter and uniformity parameter are presented. The ratio of the characteristic droplet size to the orifice diameter is discussed. It is estimated that altogether 128 kg of NaK-78 (8 kg per RORSAT) was released on orbit. Simulation runs show that there are still 45,000 droplets with a total mass of 97 kg in orbit at the reference epoch 1 May 2005, whereas the smallest droplet has a diameter of 5 mm. Results of orbit propagation simulation runs are presented in terms of spatial density.     

国际空间太阳能电站的技术进展

综述了当前国际空间太阳能电站技术的研究进展与发展趋势。重点介绍了空间太阳能电站系统方案新构思“太阳塔”和“太阳盘”的特点；介绍了空间太阳能电站的主要相关技术———无线电能传输技术、太阳能转换技术和空间运输技术等的发展趋势；最后简要介绍了月球电站的进展情况。     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

混合三元系超大集

对于三类混合三元系超大集Ti-OLGD（v）（i=1,2,3）,T1-OLGD（v）和T2-OLGD（v）的存在谱已经完全解决了,而对于T3-OLGD（v）的存在性问题,所知结果很少。本文利用代数和组合设计相结合的方法,主要利用有限域的相关知识,对于T3-OLGD（q-1）（q为素数幂）,给出了一种新的构造方法,从而得到了一系列的结果。     

地球同步卫星BSR硅太阳电池阵输出功率衰减规律分析

长期受粒子辐照、紫外辐照等因素的影响,地球同步卫星的太阳电池阵输出功率会出现较为明显的衰减。这里选取某地球同步卫星使用的背表面反射(BSR)硅太阳电池阵为研究对象,采用光强因子和温度因子修正太阳电池阵的输出功率,使用局部加权回归散点平滑法(LOWESS)分析了其在设计寿命期间的输出功率衰减规律;同时基于LOWESS建立了预测模型,用于硅太阳电池阵超寿运行期间的功率预测。实测数据表明:本文构建的预测模型可以满足超寿地球同步卫星在轨管理使用需求。     

变形飞行器建模及控制方法研究综述

针对变形飞行器的发展现状、气动建模、动力学建模以及控制方法研究进行了综述。首先阐述了变形飞行器的定义及变形需求,再从四个方面梳理了变形飞行器的技术优势。针对不同的机翼变形方式,对飞行器各种变形技术的特点及发展现状进行了详细的分析与总结;将变形飞行器与固定外形飞行器的气动机理进行了对比分析,并对变形飞行器的动力学建模方法进行了梳理,总结了各种方法的特点;结合变形飞行器自身特性分析了飞行控制的特点及难点,并详细阐述了各类变形飞行器的控制研究进展。最后总结分析了变形飞行器的发展趋势：深化基础理论与技术研究,从材料、结构及控制等领域全方面朝着智能化方向发展,最终实现变形飞行器的工程化、自主化、智能化应用。