高负荷跨声速压气机动静叶干扰下叶片气动负荷研究

通过数值方法模拟了某型高负荷跨声速压气机在工作点的非定常流场，对级内动静叶的气动干扰进行了深入分析。通过气动力和力矩的变化对动静叶干扰下的叶片非定常气动负荷进行了详细的分析，研究了尾迹和势流干扰下叶片气动负荷的变化规律，结合频谱分析进一步认识了气动负荷各周期分量，研究结果有助于对高负荷压气机内动静叶非定常气动干扰的认识。     

亚声速叶片与跨声速叶片的气动阻尼比较

为了研究叶轮机中叶片与流场流固耦合作用情况下的气动阻尼,分别以亚声速和跨声速转子叶片为例计算气动阻尼。根据对非定常气动力的分析,提出了一种与结构等效粘滞阻尼比对应的模态气动等效粘滞阻尼比的定义。采用弱耦合分域求解的算法,在线性范围内,计算并比较了跨声速叶片和亚声速叶片模态和振幅对模态气动阻尼比的影响,根据分布气动阻尼比研究压缩波对模态气动阻尼比的影响。研究结果表明这两类叶片的气动阻尼特性基本一致,所提参数对两类叶片的气动阻尼的影响基本相同。     

叶轮机械颤振稳定性的工程预测方法

通过求解雷诺平均N-S方程并采用影响系数法,对三个基本正交模态的三维振荡涡轮叶片绕流问题进行了研究。结果表明数值模拟所得非定常气动力与实验吻合较好;基于刚体运动假设和模态叠加法,得到了可用于叶轮机械设计阶段颤振稳定性评估的稳定性参数图/气动阻尼图,即所有可能的刚体运动及其相应气动阻尼的关系图;通过对稳定性参数图/气动阻尼图的分析表明,在一定情况下振型对颤振稳定性有重要影响,应将其作为颤振稳定性设计的重要参数之一。     

火箭发动机超声速过膨胀射流气动噪声特性研究

采用大涡模拟LES方法计算了火箭发动机超声速过膨胀射流形态及近场声压分布,研究了入口温度与环境温度的比值(温度比)对声场的影响;将声源分解,基于Ffowcs Williams-Hawkings (FW-H)方程获取了不同位置噪声源的远场噪声,并根据声压级频谱和湍流形态分析了超声速射流噪声的产生机理。研究表明,超声速过膨胀射流气动噪声由湍流混合噪声和宽频激波噪声组成,近场噪声源以马赫波形式向大方位角辐射中高频噪声,下游大尺度湍流向低方位角范围辐射低频噪声,声压级峰值频率随观测角度增大而升高;随温度比升高,马赫波辐射角度增大,噪声指向性发生改变。该研究可为运载火箭发动机地面试车或火箭发射段声学环境设计提供参考。     

高超声速飞行器气动热耗散、输运及转换技术研究进展

针对高超声速飞行器面临的严重气动热集中、累积和时变问题,从气动热耗散、输运和转换三个方面,分别论述了被动热耗散材料、结构和主动热耗散技术,基于高导热材料、热管和工质对流的热输运技术,以及再生转换和热电转换技术的研究现状及其在高超声速飞行器上的应用案例,提出了上述技术在面临高超声速气动热时存在的问题。最后,针对高超声速飞行器气动热耗散、输运和转换技术的发展趋势进行了展望。     

旋成体在无侧滑大攻角下的横向气动力特性

介绍具有尖锥头部细长旋成体（以下简称弹体）在无侧滑下横向气动力随攻角变化特性，其中包括尖锥头部顶角、旋成体长细比、初始滚转角、试验雷诺数诸参数对横向气动特性的影响。还介绍美国ＮＡＳＡ的一篇综合研究报告的部分结果。试验结果表明，在低亚音速下，弹体气动特性对上述诸参数反应极为敏感，有时呈现随机特性。头部加边条、减小长细比或在后体装尾翼，将有助于减弱横向气动力。采用弹体旋转飞行技术，虽然产生Ｍａｇｎｕｓ侧向力，但有效地克服了气动力的随机性。     

充气气囊减速方案的气动设计研究

减速是航天飞行器必须面对的问题。充气气囊减速方案利用柔性编织材料外加涂层方式构成气囊，利用气体发生器快速产生高压气体，集防热、减速和着陆减振功能于一体，重量轻、成本低、适用范围广、可靠性高。设计了满足减速需求的气囊外形，利用数值求解NS方程和工程计算方法进行了气动力的预测和比较分析，利用六自由度动力学模型与气动力的耦合计算，对减速效果进行了计算与分析，并对热环境、温度场、应力、热应力及变形进行了计算，还对分离不确定性进行了研究。地面引导性风洞试验和理论分析表明，充气气囊减速方案具有十分明确的减速效果和优点，可用于未来航天飞行器实现减速飞行目的的技术方案。     

一种低RCS无人飞行器外形的气动特性实验研究

根据气动布局的基本原理,结合低RCS要求,设计了一种鸭式布局、带边条的翼身融合无人飞行器外形,实验结果表明,该外形不仅具有低RCS特征,而且具有良好的气动特性,升阻比达到8左右。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.