宽带噪声干扰源对直接序列扩频通信的干扰效果分析

依据最佳接收和匹配滤波的基本理论 ,证明了如下的结论 :尽管直接序列扩频 ( DS-SS)体制对宽带白噪声没有抗干扰的扩频增益——处理增益 ,而在干扰功率一定的条件下 ,宽带噪声干扰并不具有比窄带噪声干扰更有效的干扰效果。从而 ,澄清了在这一问题上的种种不正确的观念     

基于单神经元的飞航导弹智能PID控制

针对飞航导弹扇面发射和大空域机动飞行引起的非线性时变、建模误差等问题，根据智能控制、神经网络及传统的PID控制理论设计了一种基于单神经元的智能自整定PID控制器。仿真结果表明，该控制器可使飞航导弹的自动驾驶仪具有较好的飞行品质和精度、更强的鲁棒性，同时也能满足实时性要求，且工程实现简单。     

天线罩外形形线对天线罩性能的影响

比较和分析了不同天线平外形形线在不同长细比情况下对天线罩的电气性能和气动特性的影响。分析认为，在设计天线罩时，应根据导弹和天线罩的综合性能要求进行综合处理。     

本振相位噪声引起QPSK信号信噪比降低的分析与仿真

QPSK调制方式频带利用率高，因而在通信系统中被广泛采用。载波相位噪声对QPSK调制解调的影响是不可忽略的，也是难以分析的。文章在前人时域分析的基础上，侧重于对频域的分析，使得分析简单，意义明显直观，并在此基础上作了仿真，分析与仿真结果在一定的误差范围内是正确的。     

Computational study of wing deformation and sting interference effects with the CAE-AVM test case

A modern transonic computational fluid dynamics test case is described in this paper, which is the Aerodynamic Validation Model (AVM) from the Chinese Aeronautical Establishment (CAE). The CAE-AVM is a representation of a modern transonic business jet aircraft with a design Mach number of 0.85. Numerical simulations for the AVM are conducted for two geometries: one baseline geometry, and one geometry that includes the applied model support system of the wind tunnel as well as the deformed wing shape that occurred during wind tunnel testing. The combined influence of wing deformation and model support interference on local and integral aerodynamic features is presented. Comparisons between CFD and experimental results are made; reasons of discrepancy between results from considered cases are analyzed.     

Multi-input multi-output random vibration control using Tikhonov filter

Noises always disturb the control effect of an environment test especially in multi-input multi-output (MIMO) systems. If the frequency response function matrices are ill-conditioned, the noises in the driving forces will be amplified and the response spectral lines may awfully exceed their tolerances. Most of the major biases between the response spectra and the reference spectra are pro-duced by the amplified noises. However, ordinary control algorithms can hardly reduce the level of noises. The influences of the noises on both the auto-and cross-power spectra are analyzed in this paper. As a conventional frequency domain method on the inverse problem, the Tikhonov filter is adopted in the environment test to suppress the exceeding spectral lines. By altering regularization parameters gradually, the auto-power spectra can be improved in a closed control loop. Instead of using the traditional way of selecting regularization parameters, we observe the coherence change to estimate noise eliminations. Incidentally, the requirement of coherence control can be realized. The errors of the phase are then studied and a phase control algorithm is introduced at the end as a sup-plement of cross-power spectra control. The Tikhonov filter and the proposed phase control algo-rithm are tested numerically and experimentally. The results show that the noises in the vicinity of lightly damped resonant peaks are more stubborn. The response spectra are able to be greatly improved by the combination of these two methods.     

Aerodynamic database development of the ESA intermediate experimental vehicle

This work deals with the aerodynamic database development of the Intermediate Experiment Vehicle.     

Effect of surface blowing on aerodynamic characteristics of tubercled straight wing

Recent research proves that wings with leading-edge tubercles have the ability to perform efficiently in post-stall region over the conventional straight wing. Moreover, the conventional straight wing outperforms the tubercled wing at a pre-stall region which is quintessential. Even though tubercled wing offers great performance enhancement, because of the complexity of the flow, the trough region of the tubercled wing is more prone to flow separation. Henceforth, the present paper aims at surface blowing – an active flow control technique over the tubercled wing to enhance the aerodynamic efficiency by positively influencing its lift characteristics without causing any additional drag penalty. Flow parameters like blowing velocity ratios and the location of blowing were chosen to find the optimised configuration keeping the amplitude and frequency of the leading-edge tubercles constant as 0.12 c and 0.25 c respectively. Numerical investigations were carried out over the baseline tubercled wing and tubercled wing with surface blowing at various blowing jet velocity ratios 0.5, 1 and 2 over four different chordwise locations ranging from 0.3 c to 0.8 c.The results confirm that blowing at various x/c with different blowing velocity ratios performs better than the conventional tubercled wing. Comparatively, blowing velocity ratio 2 at 0.3 c shows peak performance of about 28% enhancement in the lift characteristics relative to the baseline model. Particularly, in the pre-stall region, 25–50% increase in aerodynamic efficiency is evident over the tubercled wing with surface blowing compared with the baseline case. Additionally,attempts were made to delineate the physical significance of the flow separation mechanism due to blowing by visualizing the streamline pattern.     

基于积分投影的去除噪声算法用于人脸图像处理

本文提出了一种解决滤除人脸图像中高频及低频噪声的新算法。首先可对原始人脸图像进行边界提取，并使之成为二值图；然后，分别采用水平及垂直积分投影的方法，在低频与高频噪声中确定人脸轮廓；在此基础上，消除轮廓以外的噪声。     

Aerodynamic multi-objective integrated optimization based on principal component analysis

Based on improved multi-objective particle swarm optimization (MOPSO) algorithm with principal component analysis (PCA) methodology,an efficient high-dimension multiobjective optimization method is proposed,which,as the purpose of this paper,aims to improve the convergence of Pareto front in multi-objective optimization design.The mathematical efficiency,the physical reasonableness and the reliability in dealing with redundant objectives of PCA are verified by typical DTLZ5 test function and multi-objective correlation analysis of supercritical airfoil,and the proposed method is integrated into aircraft multi-disciplinary design (AMDEsign) platform,which contains aerodynamics,stealth and structure weight analysis and optimization module.Then the proposed method is used for the multi-point integrated aerodynamic optimization of a wide-body passenger aircraft,in which the redundant objectives identified by PCA are transformed to optimization constraints,and several design methods are compared.The design results illustrate that the strategy used in this paper is sufficient and multi-point design requirements of the passenger aircraft are reached.The visualization level of non-dominant Pareto set is improved by effectively reducing the dimension without losing the primary feature of the problem.