带权优化约束Delaunay三角化算法

Delaunay细化算法是目前大多数约束Delaunay三角化算法的主要思想,针对其要求输入的约束条件中不能包含夹角较小的尖角的问题,给出了Delaunay细化算法收敛的充分条件,并通过在尖角点和尖角边处引入带权点和带权Delaunay空圆/球准则的方法提出了一种带权优化约束Delaunay三角化算法,解决了经典的细化算法在尖角处算法不收敛时需引入辅助控制区域以及过多辅助点的问题,对算法的收敛性进行了分析,给出了相应的算法应用实例,可以应用于复杂几何对象的科学计算和工程分析.     

纤维缠绕低损伤退绕跟随系统

为降低纤维缠绕过程中纱筒退绕的纤维磨损,研制了低损伤退绕跟随系统。通过分析纱筒卷绕特点及退绕运动过程,提出了角度替代的控制思想和导纱器自适应跟随控制策略;通过计算机控制伺服电机驱动导纱器运动,可实现对任意卷绕线型的自动跟随。实际应用表明:该方法可行,研制的系统跟随效果理想,有效消除了纤维的摩擦损伤,提高了缠绕复合材料制品的质量。     

An adaptive fast fixed-time guidance law with an impact angle constraint for intercepting maneuvering targets

Sliding mode guidance laws based on a conventional terminal sliding mode guarantees only finite-time convergence, which verifies that the settling time is required to be estimated by selecting appropriate initial launched conditions. However, rapid convergence to a desired impact angle within a uniform bounded finite time is important in most practical guidance applications. A uniformly finite-time/fixed-time convergent guidance law means that the convergence (settling) time is predefined independently on initial conditions, that is, a closed-loop convergence time can be estimated a priori by guidance parameters. In this paper, a novel adaptive fast fixed-time sliding mode guidance law to intercept maneuver targets at a desired impact angle from any initial heading angle, with no problems of singularity and chattering, is designed. The proposed guidance law achieves system stabilization within bounded settling time independent on initial conditions and achieves more rapid convergence than those of fixed-time stable control methods by accelerating the convergence rate when the system is close to the origin. The achieved acceleration-magnitude constraints are rigorously enforced, and the chattering-free property is guaranteed by adaptive switching gains. Extensive numerical simulations are presented to validate the efficiency and superiority of the proposed guidance law for different initial engagement geometries and impact angles.     

基于超网格的重叠网格守恒插值方法

保证重叠网格边界数据插值的守恒性是计算流体力学面临的一大难题。基于超网格方法与格心格式有限体积法,发展了一种新型混合重叠网格守恒插值方法。详细研究了用网格切割技术在重叠网格边界构造局部超网格,用网格求交算法合理地扩大贡献单元模板,建立了一种适用于任意网格类型的隐式并行重叠网格守恒插值方法,以超网格为媒介可实现重叠网格二阶精度的守恒插值。数值结果表明,本文方法对二阶分布的流场变量具有严格的守恒性,相比三线性插值方法和逆向距离权插值方法,本文方法减小了数值误差,提高了重叠网格边界的插值精度,加快了计算收敛速度,改善了重叠区域网格尺度相差较大时流场的光滑性和连续性。     

高效非结构网格变形与流场插值方法

非结构动网格在含动边界的非定常流动模拟中应用十分广泛。为了提高网格变形的计算效率和对复杂外形的适用性,发展了高效的K近邻-径向基函数（KNN-RBF）动网格方法。并采用高效的交界面节点一致性方法实现了网格变形的并行化。由于边界的运动和变形形式多种多样,在自主开发的计算流体力学（CFD）程序中实现了动网格的用户自定义函数（UDF）功能模块,可以灵活地设置此类问题中的边界运动。在模拟大变形问题时,采用了全局网格重构的策略对网格质量较差的区域进行处理。提出了快速查找新旧网格最近点的两级KD（K-Dimensional）树方法,并根据最近点在新旧网格间进行流场插值。从而建立了高效健壮的并行流场插值方法。通过对若干算例进行模拟,验证了所发展方法的正确性和健壮性。     

动基座近舰面流场数值模拟

航母尾迹流场对舰载机的着舰有较大影响,所以需要对其流场特点进行研究,分析不同状态下舰载机气动特性的变化。采用嵌套网格技术对航母处于垂荡状态下无人机的着舰进行了模拟。首先,利用SFS2舰船进行数值计算,验证了舰船流场的数值模拟方法。然后,对比了单独无人机定常与非定常计算结果,表明所建立的嵌套网格适用于无人机流场的模拟。接着,对航母单相流和两相流的流场结果进行了分析,结果显示甲板下方的流动对甲板上方流场没有大的影响。因此,忽略了水的影响只对航母在空气流场中的特性进行研究,结果表明航母尾迹非定常特性明显,静止航母下滑轨迹上的速度均处于周期性波动状态,且波动幅值随着远离航母而逐渐衰减;而在垂荡情况下航母尾迹变得更加紊乱,水平方向速度波动的周期性减弱,但垂向速度的波动幅值进一步增大。对于静止航母,无人机在不同时刻着舰气动特性的变化也存在差异;当航母处于垂荡状态时,无人机的升力和俯仰力矩在短时间内会有更大的波动。     

涡轮平面叶栅非轴对称端壁优化设计

开发了一套造型灵活直观、网格生成速度快的涡轮平面叶栅非轴对称端壁优化设计工具,该工具的核心技术是非均匀有理B样条(NURBS)曲面造型和网格变形.在此基础上以商业软件Isight为优化驱动器,以CFX为求解器,搭建了非轴对称端壁优化设计流程.以Pack B涡轮平面叶栅为例,对其进行了非轴对称端壁优化设计.优化后涡轮平面叶栅总压损失系数减小了12.96%.结果表明:涡轮平面叶栅端部的静压分布改变削弱了涡轮平面叶栅通道中马蹄涡、通道涡的强度,提高了涡轮平面叶栅的气动性能.      

Applications of tuned mass dampers to improve performance of large space mirrors

In order for future imaging spacecraft to meet higher resolution imaging capability, it will be necessary to build large space telescopes with primary mirror diameters that range from 10 m to 20 m and do so with nanometer surface accuracy. Due to launch vehicle mass and volume constraints, these mirrors have to be deployable and lightweight, such as segmented mirrors using active optics to correct mirror surfaces with closed loop control. As a part of this work, system identification tests revealed that dynamic disturbances inherent in a laboratory environment are significant enough to degrade the optical performance of the telescope. Research was performed at the Naval Postgraduate School to identify the vibration modes most affecting the optical performance and evaluate different techniques to increase damping of those modes. Based on this work, tuned mass dampers (TMDs) were selected because of their simplicity in implementation and effectiveness in targeting specific modes. The selected damping mechanism was an eddy current damper where the damping and frequency of the damper could be easily changed. System identification of segments was performed to derive TMD specifications. Several configurations of the damper were evaluated, including the number and placement of TMDs, damping constant, and targeted structural modes. The final configuration consisted of two dampers located at the edge of each segment and resulted in 80% reduction in vibrations. The WFE for the system without dampers was 1.5 waves, with one TMD the WFE was 0.9 waves, and with two TMDs the WFE was 0.25 waves. This paper provides details of some of the work done in this area and includes theoretical predictions for optimum damping which were experimentally verified on a large aperture segmented system.     

光电自准直仪自适应光源设计方法研究

介绍了一种自适应光源设计方法。利用反馈原理自动校正自准直光源参数,调节发光强度,降低了自准直仪对反光面、使用环境的苛刻要求,提高了仪器的环境通用性及测量精度。     

基于非结构网格的燃面推进算法

根据惠更斯波传播原理,构建了一种在通用CFD软件的非结构网格系统上直接计算燃面推进的数值方法。该方法将燃面对应的计算网格面作为一系列平面波源,利用网格几何关系对边界节点奇异性进行判定,通过所有平面波源影响区域的叠加求解新的燃面位置。数值实现过程中,根据节点奇异性和波源影响区域以三维矢量运算得到节点的推进矢量。结合网格的重分,在通用CFD软件环境中实现了燃面的推进,所用数值算法具有良好的精度。另外,对三维动态内弹道模拟中燃面计算的稳定性和精度等问题进行了研究。