Solar filament eruptions and their physical role in triggering coronal mass ejections

Solar filament eruptions play a crucial role in triggering coronal mass ejections (CMEs). More than 80% of eruptions lead to a CME. This correlation has been studied extensively during the past solar cycles and the last long solar minimum. The statistics made on events occurring during the rising phase of the new solar cycle 24 is in agreement with this finding. Both filaments and CMEs have been related to twisted magnetic fields. Therefore, nearly all the MHD CME models include a twisted flux tube, called a flux rope. Either the flux rope is present long before the eruption, or it is built up by reconnection of a sheared arcade from the beginning of the eruption.     

室内覆盖系统在3G网络中的应用

通过对室内有源、无源覆盖系统改造方案的介绍,探讨了室内覆盖系统在3G网络中的应用,提出了3G室内覆盖解决方案。     

WMAP extragalactic point sources as potential Space VLBI calibrators

The point source list of the Wilkinson Microwave Anisotropy Probe (WMAP) is a uniform, all-sky catalogue of bright sources with flux density measurements at high (up to 94 GHz) radio frequencies. We investigated the five-year WMAP list to compile a new catalogue of bright and compact extragalactic radio sources to be potentially studied with Very Long Baseline Interferometry at millimeter wavelengths (mm-VLBI) and Space VLBI (SVLBI). After comparing the WMAP data with the existing mm-VLBI catalogues, we sorted out the yet unexplored sources. Using the 41, 61 and 94 GHz WMAP flux densities, we calculated the spectral indices. By collecting optical identifications, lower-frequency radio flux densities and VLBI images from the literature, we created a list of objects which have not been investigated with VLBI at 86 GHz before. With total flux density at least 1 Jy and declination above −40°, we found 37 suitable new targets. It is a nearly 25% addition to the known mm-VLBI sources. Such objects are also potentially useful as phase-reference calibrators for the future Japanese SVLBI mission ASTRO-G at its highest observing frequency (43 GHz). The phase-referencing capability of ASTRO-G would allow long integrations and hence better sensitivity for observing faint target sources close to suitable phase calibrators in the sky.     

Analytic estimation and numerical modeling of actively cooled thermal protection systems with nickel alloys

Actively cooled thermal protection system has great influence on the engine of a hypersonic vehicle, and it is significant to obtain the thermal and stress distribution in the system. So an analytic estimation and numerical modeling are performed in this paper to investigate the behavior of an actively cooled thermal protection system. The analytic estimation is based on the electric analogy method and finite element analysis（FEA） is applied to the numerical simulation. Temperature and stress distributions are obtained for the actively cooled channel walls with three kinds of nickel alloys with or with no thermal barrier coating（TBC）. The temperature of the channel wall with coating has no obvious difference from the one with no coating, but the stress with coating on the channel wall is much smaller than that with no coating. Inconel X-750 has the best characteristics among the three Ni-based materials due to its higher thermal conductivity, lower elasticity module and greater allowable stress. Analytic estimation and numerical modeling results are compared with each other and a reasonable agreement is obtained.     

A deorbiter CubeSat for active orbital debris removal

This paper introduces a mission concept for active removal of orbital debris based on the utilization of the CubeSat form factor. The CubeSat is deployed from a carrier spacecraft, known as a mothership, and is equipped with orbital and attitude control actuators to attach to the target debris, stabilize its attitude, and subsequently move the debris to a lower orbit where atmospheric drag is high enough for the bodies to burn up. The mass and orbit altitude of debris objects that are within the realms of the CubeSat’s propulsion capabilities are identified. The attitude control schemes for the detumbling and deorbiting phases of the mission are specified. The objective of the deorbiting maneuver is to decrease the semi-major axis of the debris orbit, at the fastest rate, from its initial value to a final value of about 6471?km (i.e., 100?km above Earth considering a circular orbit) via a continuous low-thrust orbital transfer. Two case studies are investigated to verify the performance of the deorbiter CubeSat during the detumbling and deorbiting phases of the mission. The baseline target debris used in the study are the decommissioned KOMPSAT-1 satellite and the Pegasus rocket body. The results show that the deorbiting times for the target debris are reduced significantly, from several decades to one or two years.     

Feasibility analysis of LEO and GEO large space debris de/re-orbiting taking into account launch mass of spacecraft-collector and its configuration layout

Analysis of the efficiency of two basic strategies for de/re-orbiting large space debris objects to disposal orbits (DO) is given. Large objects in LEO are classified into groups with similar orbital inclinations and comprise primarily last stages of launch vehicles, in GEO vicinity the paper studies upper stages. Under the first de/re-orbiting variant, it is assumed a spacecraft-collector is equipped with several thruster de/re-orbiting kits (TDKs); one of them can be fixed on an object and is capable of de/re-orbiting an object to a DO independently of the collector. In the second variant, a collector operates as a space tug: transfers objects to a DO and then returns to the next objects in line. The authors study possible configuration layouts of collectors in LEO and near GEO. The available analogous projects are analyzed. The efficiency of both de/re-orbiting variants can be properly compared using the estimations of collector's dry mass and having at one's disposal the parameters of the maneuvers required for transfers between all objects in the group. As reasonable criteria of effectiveness, one can consider (separately or jointly) the launch mass of an equipped collector, its ΔV budget, and the required number of such active spacecraft. Two de/re-orbiting variants are compared in terms of these criteria via mass-energy diagrams constructed for each group of objects in both altitude regions. Analysis of these diagrams shows that low Earth orbits can be more efficiently cleaned under the first de-orbiting variant by using a two-stage space system consisting of an active spacecraft carrying TDKs. For GEO, it is expedient to choose the second re-orbiting variant using a single-stage spacecraft. Our analysis shows that LEO cleaning is an order of magnitude more expensive than that for GEO, hence the problem of LEO population should be given increased attention.     

改进型负输入成形主动振动控制

针对柔性结构的主动振动控制问题,提出了一种改进型负输入成形方法。该方法设计成形器的脉冲序列包含多个正负依次交替的脉冲,通过所选择的脉冲数目和系统振动频率与阻尼比构成封闭形式解来直接确定成形器。与正输入成形方法相比可以改善系统的上升时间,而与传统的负输入成形方法相比不需要对时间约束条件进行优化。改进型负输入成形器所包含的脉冲个数可以自由选择,具有设计简单、灵活的优点。将其通过柔性机械臂进行仿真验证,结果表明：所提出的方法有效且可以快速实现振动抑制。     

Actors of the main activity in large complex centres during the 23 solar cycle maximum

During the maximum of Solar Cycle 23, large active regions had a long life, spanning several solar rotations, and produced large numbers of X-class flares and CMEs, some of them associated to magnetic clouds (MCs). This is the case for the Halloween active regions in 2003. The most geoeffective MC of the cycle (Dst = −457) had its source during the disk passage of one of these active regions (NOAA 10501) on 18 November 2003. Such an activity was presumably due to continuous emerging magnetic flux that was observed during this passage. Moreover, the region exhibited a complex topology with multiple domains of different magnetic helicities. The complexity was observed to reach such unprecedented levels that a detailed multi-wavelength analysis is necessary to precisely identify the solar sources of CMEs and MCs. Magnetic clouds are identified using in situ measurements and interplanetary scintillation (IPS) data. Results from these two different sets of data are also compared.     

一种超静平台主动指向容错控制方法

针对超静平台主动指向控制中的作动器故障问题,提出一种超静平台主动指向容错控制方法。首先,基于超静平台的一般动力学模型,推导用于指向控制的解耦模型和标准解耦矩阵,将超静平台由高度耦合的复杂多输入多输出系统变为多个相对简单的单输入单输出系统,有利于控制器的设计和容错控制方法的引入;在此基础上,针对作动器的故障问题,提出指向控制重构策略,并建立新解耦矩阵;进一步,提出基于解耦矩阵条件数最小的冗余自由度选择方法;最后,进行了数值仿真分析。仿真结果表明：基于冗余自由度最优选择的主动指向容错控制方法能够最大限度地减少作动器故障对超静平台主动指向控制效果的影响。