Analytical solution methods for eigenbuckling of symmetric cross-ply composite laminates

Based on the first-order shear deformation theory, this paper explores the analytical methods for eigenbuckling of symmetric cross-ply rectangular composite laminates with a pair of parallel edges simply supported and the remaining two edges arbitrarily constrained. The main con-tribution of present paper lies in two aspects: one is to present a simple and effective analytical method, namely, the separation-of-variables method, which can generate the closed-form buckling solutions without any computational difficulty;the other is to incorporate the accurate computation method of exponential matrix into the state space technique to avoid the inevitable numerically ill-conditioned problems reported in several literatures. The results obtained via both analytical meth-ods are identical, and a good agreement with their counterparts in literature is observed. The separation-of-variables method can generate exact solutions within 1 s, which is impossible if the state space method is employed. Besides, the combination of the accurate computation method of exponential matrix and the state space method greatly improves the computational efficiency and gives correct results compared with the straightforward use of state space method.     

Motion prediction of a non-cooperative space target

Capturing a non-cooperative space target is a tremendously challenging research topic. Effective acquisition of motion information of the space target is the premise to realize target capture. In this paper, motion prediction of a free-floating non-cooperative target in space is studied and a motion prediction algorithm is proposed. In order to predict the motion of the free-floating non-cooperative target, dynamic parameters of the target must be firstly identified (estimated), such as inertia, angular momentum and kinetic energy and so on; then the predicted motion of the target can be acquired by substituting these identified parameters into the Euler’s equations of the target. Accurate prediction needs precise identification. This paper presents an effective method to identify these dynamic parameters of a free-floating non-cooperative target. This method is based on two steps, (1) the rough estimation of the parameters is computed using the motion observation data to the target, and (2) the best estimation of the parameters is found by an optimization method. In the optimization problem, the objective function is based on the difference between the observed and the predicted motion, and the interior-point method (IPM) is chosen as the optimization algorithm, which starts at the rough estimate obtained in the first step and finds a global minimum to the objective function with the guidance of objective function’s gradient. So the speed of IPM searching for the global minimum is fast, and an accurate identification can be obtained in time. The numerical results show that the proposed motion prediction algorithm is able to predict the motion of the target.     

FUZZY IDENTIFICATION METHOD BASED ON A NEW OBJECTIVE FUNCTION

Many fuzzy models on modeling and controlmethods have been developed since Takagi-Sugeno model was proposed[1] .The main prob-lems of the fuzzy identifying method based on T-S model appear in the following two aspects:　　 1 It is important what heuristic knowledgeis chosen to acquire the premise structure of theT- S model.This problem is related to the opti-mal partition of input space of premise part andmodeling accuracy.　　 2 Itis crucial whatidentifying method is u-tilized to estimate …     

基于复杂网络的航空制造供应链关键节点识别研究

随着不稳定因素的增加以及航空制造供应链的参与主体增多，航空制造供应链的管理所面临的风险也随之增大。因此针对航空制造供应链网络的风险管理，以复杂网络为工具研究供应链网络中的关键节点识别问题，从而帮助航空供应链提升抗风险能力。通过分析我国航空制造供应链网络现状和特点，提出供应链形成机制并划分供应链层级，对航空制造供应链进行构建及指标界定，对度中心性、介数中心性、接近中心性三种经典中心性算法以及传统K-Shell 分解算法进行加权改进；结合熵值-TOPSIS 法提出一种针对加权网络的供应链关键节点识别算法——WKC 算法，通过构造网络来进行算例分析，验证该种算法的有效性。结果表明：本文提出的WKC 算法原理科学、计算复杂度较低，为航空制造等高端装备制造业供应链的风险管理提供了一定的参考。     

变截面悬臂梁结构动载荷辨识方法

在航空航天领域，作用在结构上动载荷的确定对结构健康监测是非常必要和重要的。为此，本文以类似机翼结构的变截面悬臂梁结构为研究对象，提出了一种基于光纤光栅传感器与卡尔曼滤波器的动载荷识别方法。首先，根据变截面梁单元形式，推导出变截面梁的质量矩阵与刚度矩阵，建立动力学运动方程。然后，以光纤光栅传感器测得的应变信息作为观测信号，通过卡尔曼滤波器生成的增益矩阵、新息序列矩阵以及协方差矩阵，得到灵敏度矩阵和估计力的增益矩阵。在此基础上，利用广义回归模型及其最小二乘算法，估算出动载荷大小、判断出动载荷激励位置。借助数值仿真与实验手段，分别验证了该方法对于单点正弦激励、方波激励、锯齿波激励以及多点同时激励等工况下的动载荷识别效果。结果表明，本文所提算法具有较好的动载荷识别效果和噪声抑制能力，能够为未来风洞试验和真实飞行试验环境中诸如大展弦比机翼表面气动压力等载荷实时辨识、气动外形自适应控制以及结构健康监测提供技术支撑。     

A novel none once per revolution blade tip timing based blade vibration parameters identification method

The vibration caused blade High Cycle Fatigue (HCF) is seriously affects the safety operation of turbomachinery especially for aero-engine. Thus, it is crucial important to identify the blade vibration parameters and then evaluate the dynamic stress amplitude. Blade Tip Timing (BTT) method is one of the promising method to solve these problems. While, it need a high resolution Once Per Revolution (OPR) signal which is difficult to get for the aero-engine. Here, a Coupled Vibration Analysis (CVA) method for identifying blade vibration parameters by a none OPR BTT is proposed. The method assumes that every real blade has its own vibration performance at a given speed. Whereby, it can take any blade as the reference blade, and the other blades using the reference blade as the OPR for vibration displacement calculating and further parameter identifying. The proposed method is validated by numerical model. Also, experimental studies are carried out on a straight blade and a twisted three dimensional blade test rig as well as a large industrial axial compressor respectively. The results show that the proposed method can accurately identify the blade synchronous vibration parameters and quantitatively evaluate the mistuning in bladed disks, which lays a foundation for the reliability improvement of aero-engine.     

Boundary condition modelling and identification for cantilever-like structures using natural frequencies

The actual boundary conditions of cantilever-like structures might be non-ideally clamped in engineering practice, and they can also vary with time due to damage or aging. Precise modelling of boundary conditions, in which both the boundary stiffness and the boundary mass should be modelled correctly, might be one of the most significant aspects in dynamic analysis and testing for such structures. However, only the boundary stiffness was considered in the most existing methods. In this paper, a boundary condition modelling and identification method for cantilever-like structures is proposed to precisely model both the boundary stiffness and the boundary mass using sensitivity analysis of natural frequencies. The boundary conditions of a cantilever-like structure can be parameterized by constant mass, constant rotational inertia,constant translational stiffness, and constant rotational stiffness. The relationship between natural frequencies and boundary parameters is deduced according to the vibration equation for the lateral vibration of a non-uniform beam. Then, an iterative identification formulation is established using the sensitivity analysis of natural frequencies with respect to the boundary parameters. The regularization technique is also used to solve the potential ill-posed problem in the identification procedure.Numerical simulations and experiments are performed to validate the feasibility and accuracy of the proposed method. Results show that the proposed method can be utilized to precisely model the boundary parameters of a cantilever-like structure.     

基于过程方法的测量设备控制

测量设备控制是企业内部管理和外部质量管理体系审核中的一项重要内容,在现有的管理中,因缺乏对相关过程进行系统识别,某些过程要素常被疏忽或遗漏,导致测量设备失控和测量结果失准。本文采用过程方法,系统地识别了测量设备控制的相关过程和过程要素,提出了过程监控指标及其评价准则,对于提高过程效率具有一定的参考价值。     

基于随机时隙的RFID读写器防冲突方法

针对密集读写器环境下的无线射频识别(RFID,Radio Frequency Identification)多读写器冲突情况,提出了一种基于随机时隙并通过中央计算机协调的读写器防冲突方法.首先,中央计算机发送每轮起始命令和时隙指令,读写器根据当前利用率随机选择时隙.选择当前时隙的读写器若没有接收到忙信号则发送信标并侦听,若无邻近读写器发送信标则开始读写标签,否则该轮回停止工作.若时隙末存在没有接收到忙信号的读写器则在额外时隙发送二次信标.与现有的分布式防冲突方法相比,该方法具有较好的吞吐量和公平性.     

加速度计温控系统被控对象建模技术研究

加速度计工作过程中,其内部与外界环境存在温度梯度,针对温度变化影响加速度计参数的问题,提出了一种加速度计温控系统被控对象建模的方法。进行了多工作点加速度计升温和降温试验,采用递推增广最小二乘法对被控对象模型进行了辨识,建立了加速度计温控系统被控对象模型和降温模型,计算结果表明,3min后温控系统被控对象模型曲线残差在-0.5~0.5℃之间,降温模型曲线残差在-0.15~0.15℃之间,满足系统对加速度计性能需求,表明了方法的有效性。