X-ray synchrotron nebulae and the origin of neutron stars

“With all reserve, we advance the view that a supernova represents the transition of an ordinary star into a neutron star.”This conclusion, reached just 50 years ago in a classic paper by Walter Baade and Fritz Zwicky (1934), was published three decades before the first direct observational evidence for the existence of neutron stars was uncovered. It still informs the standard picture of neutron star production in the Galaxy. We examine herein some recent evidence bearing on this question which has been derived from Observatory X-ray observations of supernova remnants and radio pulsars. In particular, the discovery that X-ray synchrotron nebulae are found surrounding most young ( 10⁶ yr) pulsars observed to date is discussed. We explore the implications of the lack of such nebulae in the majority of supernova remnants (SNR) for the properties and frequency of neutron star formation in supernova events.     

A319飞机APU启动故障可靠性调查

本文对A319飞机131-9A型APU启动不正常事件进行可靠性调查,对APU启动故障统计分析,对影响启动的部件采取如下措施:老式启动保险6KA质量差主动更换且飞机上配备6KA;启动马达-3构型降级为-2以提高寿命,后续再升级至更高寿命的-4构型;执行改装加长启动线路以降低启动电流;点火激励器软时限控制定期拆下送厂检测。通过针对性措施,有效减少了APU启动不正常事件的发生。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

一种微内核分区操作系统C库的适配验证方法

针对传统C库的开发和适配方法存在的局限性问题,提出一种基于微内核架构的嵌入式分区操作系统新C库的适配验证方法,依次对基于微内核架构的嵌入式分区操作系统之上C库的总体部署方案、初始化过程、典型功能模块的适配开发方法进行了详细阐述;搭建相应的硬件测试环境,在恩智浦公司的四种硬件平台上对开发和适配的C库进行了相应的功能测试和验证,提出了三个创新点.     

基于测控系统的质量信息监测系统设计与应用

在测控试验现场,针对测控设备状态和测控数据的质量信息,采用智能自动监测技术对设备和测控数据进行实时监视以及动态分析,提出了科学的异常判决方法和处理方案,开发了试验质量信息综合分析实时监测系统,实现了测控流程智能化管控、测控信息自动分析处理和质量信息自动化管理。在多颗卫星的跟踪验证中,质量信息监测系统对卫星长期管理的宏参数宏配置下发、标校和目标捕获与跟踪等任务过程能够进行准确监视,可以及时监测到测控数据和测控时间的异常并报警,并能够自动生成任务实施登记表等测控质量报表。实验表明,质量信息监测系统软硬件设计完善、状态监测点设置合理、判读测控事件方法有效。     

测控中的星载计算机快速切换

针对低轨卫星长期管理与测控中的星载计算机所需要的切换、维护的测控时间相对较长的问题,在分析原有主、备星载计算机的时间比对方法的基础上,直接针对备机建立新的时间同步模型,并进行公式推导和理论误差分析;然后建立新的测控事件调度模型,实现时间同步数据与主备机一致性数据的同时注入,优化工作流程,并有效缩短测控时间;最后编写新的遥控作业,在测控中进行实践.应用结果表明,采用新方法可以在一个测控圈次内完成在轨星载计算机的切换与维护,MTTR(Mean Time To Repair,平均恢复时间)小于8 min,时间同步精度优于1 ms,所需测控圈次相对于原方法减少83％以上,适用于在轨卫星长期管理与测控.     

星载激光测高地面数据处理设计研究

星载激光测高技术是对地观测系统中最为核心和前沿的信息获取技术之一,因其具有探测方向性好、测距精度高等特点,在地球科学领域中体现出了巨大的应用潜力。在ICESat/GLAS测高地面数据处理系统的基础上,针对将于今年发射的高分七号卫星的载荷特点,设计了一套星载激光测高地面数据处理系统软件。该软件可实现对星载激光测高数据的地面处理并生成3级数据产品,包含激光能量计算、波形分解和激光脚点定位等,以及相应各级产品的数据质量控制处理。利用高分七号仿真数据对该软件进行相应的性能测试,测试结果表明:该系统软件基本满足需求,已初步具备星载激光测高地面数据处理能力。     

某型工程车多功能检测仪的硬件设计

设计的检测仪用于检测某型工程车的电控系统,以51单片机作为中央处理单元,以MAX392多路选择器实现多路选通,以CPLD扩展外围接口,可较好地实现信号的采集、存储和信息显示等功能。检测仪还具有代用功能,在紧急情况下可代替原车电控系统进行工作。     

C/SiC复合材料螺钉拉伸强度分布模型

C/SiC复合材料螺钉是在高超声速飞行器上应用越来越广泛的一类重要紧固件,但其拉伸性能存在较大散差,分布规律尚不明确,给材料选用和结构设计带来了很大困难。本文采用电子万能试验机对M8、M10、M12三种规格的平头C/SiC复合材料螺钉进行力学性能试验,并分析了拉伸强度的分布规律。在此基础上应用双参数Weibull模型对统计数据进行拟合,并对拟合结果进行了柯尔莫哥洛夫检验。结果表明:C/SiC复合材料螺钉的拉伸性能分布满足双参数Weibull模型,其特征强度β为212 MPa,形状参数α为9. 45,可以据此进行复合材料许用强度设计。     

航空发动机整机振动中的不平衡-不对中-碰摩耦合故障研究

针对航空发动机整机振动分析,建立了含不平衡-不对中-碰摩耦合故障的转子-滚动轴承-机匣耦合动力学模型.在耦合模型中,考虑了机匣运动,同时,充分考虑了滚动轴承间隙、非线性赫兹接触以及变柔性VC(varying compliance)等非线性因素;在耦合故障中,建立了不平衡、不对中和碰摩故障模型.运用数值积分方法获取了系统响应,研究耦合故障特征和规律.仿真计算分析表明了该模型的正确有效性.