A357铸造铝合金拉伸性能研究

研究了A357铸造铝合金经T5／T6热处理后在室温条件下的拉伸性能。实验结果表明：在室温条件下,A357-T5铸造铝合金的力学性能略好于A357-T6铸造铝合金。A357铸造铝合金的力学性能明显优于A356铸造铝合金。拉伸断口分布铸造缺陷、韧窝及二次裂纹。     

适用于室温RTM工艺的氰酸酯树脂基体的研究

用苯乙烯、二乙烯基苯对双酚 A型氰酸酯 (BADCy)进行改性 ,研制了适用于室温下树脂传递模塑 (RTM)工艺操作的高性能树脂基体。该树脂具有较高的耐热性 (热变形温度 1 90～ 2 0 0℃ )和耐湿热稳定性 ;力学性能与同属 RTM工艺的 45 0 3 A树脂相当 ,某些指标优于 45 0 3 A。较好地达到了改性目的     

Na2MoO4与EDTMP在模拟工业循环水中缓蚀协同效应的研究

介绍了用浸泡法测定缓蚀剂Na2 MoO4 和EDTMP对A3钢在自配水样中缓蚀率的影响 ,结果发现在Na2 MoO4 浓度为 9.7× 10 - 4mol/L、EDTMP浓度为 18.36× 10 - 4mol/L时 ,二者的协同缓蚀效果最佳 ,在保证一定流速下更为有效 ,为进一步开发新的缓蚀剂作出了有益的尝试     

FCDU测试系统中SGU模块的研制

阐明了FCDU中扫描信号的加入原理,讨论了利用单片机和数模转换板的相互配合来实现模数2路信号同步发送的硬件、软件实现方法,最后给出研制结果。     

一种简易GPS压制式高斯白噪声窄带干扰机设计

针对GPS信号的特点,分析了压制式干扰信号功率与干扰距离之间的关系。根据这一理论,研究了GPS干扰机的设计方案,制作了干扰机并对其性能进行了分析。实验结果表明文中所设计的干扰机可以在2km范围内实现对GPS的有效干扰。     

基于改进A~*算法的进离场航线网络3D规划

为提高终端空域航线设计的自动化水平,对进离场航线进行了研究。针对独立航线规划,提出角度扩展航路点搜索方法,提高算法运行效率。选取水平剖面经济性最优为目标函数,垂直剖面满足最优爬升/下降剖面,实现3D航线网络规划。实例结果表明,在保证航线安全性、经济性的同时,算法运行稳定,效率明显提高。     

氧化时间对2A12铝合金硬质阳极氧化膜性能的影响

氧化时间作为硬质阳极氧化的工艺参数之一,对硬质阳极氧化膜层性能有着很大影响。主要研究了不同氧化时间对2A12硬质阳极氧化膜厚度、硬度及耐腐蚀性的影响,并采用金相显微镜对氧化膜的表观形貌进行了分析。结果表明:所得硬质阳极氧化膜具有类似棱柱状的结构,氧化70min所得氧化膜综合性能最佳。     

PWM型半桥式开关稳压电源的设计

介绍了一款基于PWM技术的半桥式开关稳压电源.给出了高频变压器、PWM控制及驱动电路的详细设计方法.用该方法设计了一台功率为150 W、输出电压为 15 V的半桥式开关稳压电源,并给出了实验波形.     

提高飞机使用可用度的途径

飞机的使用可用度是与飞机战备完好性相关的重要参数,本文研究了提高飞机使用可用度的途 径,并提出了飞机可用度最低门限值的概念     

Study of complex dielectric properties of lunar simulants and comparison with Apollo samples at microwave frequencies

Laboratory characterization of dielectric properties of terrestrial analogues of lunar soil (JSC-1A) and comparison with lunar samples returned from various Apollo missions is made at different as well as normalized bulk density. Here measurements of dielectric constants and losses were made at four microwave frequencies such as 1.7 GHz, 2.5 GHz, 6.6 GHz and 31.6 GHz. Complex permittivity of lunar simulant was measured at temperature ranging from −190 °C to + 200 °C using Wave-Guide cell method. Comparison of permittivity of JSC-1A with Apollo sample also has been done at similar microwave frequencies. The investigations reveal that dielectric constant and loss factor of terrestrial analogues of lunar soil are temperature dependent. As temperature is gradually increased both these parameter (storage factor and loss factor) also gradually increases. These temperatures were chosen because the Moon undergoes at that extremes level of temperature. It is scorching heat at 110 °C during the day and freezing cold at −180 °C during night. The measured value of ε can be useful for designing passive as well as active sensors.