12位串行A／D转换器MAX1247原理与应用

MAX1247是MAXIM公司推出的4通道12位串行A／D转换器，其内部具有SPI串行接口，高速、低功耗。本文详细介绍了MAXl247的工作原理、工作时序及与单片机系统的接口电路及有关的读写程序。     

动态环境中的飞行器实时三维航迹规划方法研究

本文提出了一种新的飞行器三维航迹规划方法－SDS。该方法能够在具有预先未知威胁的飞行环境中在线实时航迹规划。当飞行器上装备的探测器探测到飞行环境中有预先未知的威胁出现时，根据探测到的信息及时更新威胁数据。SDS根据新的环境信息局部修正受到影响的航迹段来获得新的全局最优航迹。在每一时刻考虑当前已知的信息下，SDS生成的航迹是满足要求的最优航迹。     

利用SINUMERIK 840D多轴回转功能实现五轴定位加工

SINUMERIK840D数控系统为用户提供了多轴回转编程功能,可不必使用专门的CAM软件便能实现五轴定位加工,分析了其回转功能并进行了编程应用。     

某型直升机旋翼转速表的数字化设计方案

提出某型直升机数字旋翼转速表的研制方案,给出以频率/数字(F/D)变换电路为核心的主要硬件原理,分析了采样误差的产生及抑制误差的措施.装机部件研制成功证实了方案的可行性.     

A multi-objective multi-memetic algorithm for network-wide conflict-free 4D flight trajectories planning

Under the demand of strategic air traffic flow management and the concept of trajectory based operations (TBO),the network-wide 4D flight trajectories planning (N4DFTP) problem has been investigated with the purpose of safely and efficiently allocating 4D trajectories (4DTs) (3D position and time) for all the flights in the whole airway network.Considering that the introduction of large-scale 4DTs inevitably increases the problem complexity,an efficient model for strategic level conflict management is developed in this paper.Specifically,a bi-objective N4DFTP problem that aims to minimize both potential conflicts and the trajectory cost is formulated.In consideration of the large-scale,high-complexity,and multi-objective characteristics of the N4DFTP problem,a multi-objective multi-memetic algorithm (MOMMA) that incorporates an evolutionary global search framework together with three problem-specific local search operators is implemented.It is capable of rapidly and effectively allocating 4DTs via rerouting,target time controlling,and flight level changing.Additionally,to balance the ability of exploitation and exploration of the algorithm,a special hybridization scheme is adopted for the integration of local and global search.Empirical studies using real air traffic data in China with different network complexities show that the pro posed MOMMA is effective to solve the N4DFTP problem.The solutions achieved are competitive for elaborate decision support under a TBO environment.     

白炽灯色温测量装置电路设计

介绍利用单片单板机接口电路完成对６Ｖ、３０Ｗ白炽灯光源与其对应的标准白炽灯光源的色温比对标定工作。     

三坐标测量机空间误差的快速检定方法

提出了一种使用Ｒｅｎｉｓｈａｗ检查规检定三坐标测量机或数控机床空间误差的快速方法，此方法一次测量即可完成包含Ｘ、Ｙ、Ｚ三个坐标轴的各项误差影响的空间误差的检定，具有速度快、效率高、准确可靠等特点。     

3D Imaging of the OH mesospheric emissive layer

A new and original stereo imaging method is introduced to measure the altitude of the OH nightglow layer and provide a 3D perspective map of the altitude of the layer centroid. Near-IR photographs of the OH layer are taken at two sites separated by a 645 km distance. Each photograph is processed in order to provide a satellite view of the layer. When superposed, the two views present a common diamond-shaped area. Pairs of matched points that correspond to a physical emissive point in the common area are identified in calculating a normalized cross-correlation coefficient (NCC). This method is suitable for obtaining 3D representations in the case of low-contrast objects. An observational campaign was conducted in July 2006 in Peru. The images were taken simultaneously at Cerro Cosmos (12°09′08.2″ S, 75°33′49.3″ W, altitude 4630 m) close to Huancayo and Cerro Verde Tellolo (16°33′17.6″ S, 71°39′59.4″ W, altitude 2272 m) close to Arequipa. 3D maps of the layer surface were retrieved and compared with pseudo-relief intensity maps of the same region. The mean altitude of the emission barycenter is located at 86.3 km on July 26. Comparable relief wavy features appear in the 3D and intensity maps. It is shown that the vertical amplitude of the wave system varies as exp (Δz/2H) within the altitude range Δz = 83.5–88.0 km, H being the scale height. The oscillatory kinetic energy at the altitude of the OH layer is comprised between 3 × 10⁻⁴ and 5.4 × 10⁻⁴ J/m³, which is 2–3 times smaller than the values derived from partial radio wave at 52°N latitude.     

A/D和D/A转换特性参数测试方法

简要介绍了A/D、D/A转换器的主要测试参数,着重讨论转换特性参数的测试方法及其在混合集成电路测试系统上的实现;同时还介绍了A/D、D/A转换器的一些其他测试方法。     

三维技术在模线样板设计中的使用

介绍三维技术在模线样板设计中的使用方法。包括平面组合件、单双曲度零件的模线样板设计中有关数据和图形的取制以及有关角度的计算过程，并通过几个典型实例详细描述了三维技术应用于模线设计的有关技巧。