TB_2─117A发动机日历时限研究

ＴＢ２－１１７Ａ发动机为米－８直升机动力装置，长期以来发动机寿命仅计算实际使用小时数，而不计算日历时限，这给飞行安全带来故障隐患且不符合适航条令。本文以我国进口米－８飞机长期领先使用数据及故障分析为基础，通过理论推导与计算，确定了一个安全可靠的日历时限。     

新型城镇化顶层设计的学理审度

顶层设计是新型城镇化改革的必然要求.国务院在《国家新型城镇化规划（2014～2020）》中提出了“走以人为本、四化同步、优化布局、生态文明、文化传承的中国特色新型城镇化道路”的目标,这一顶层设计体现了党领导新型城镇化改革的决心和信心.观照当下我国城镇化建设中存在的问题,在新的历史际遇下,我们亟须从学理的角度对关涉新型城镇化改革中的一些具体问题加以深度审视.     

多通道GPS共视法时频传递接收机的研制

GPS共视法是国际上流行的远距离时间频率传递技术,核心是共视法接收机。我们成功研制了多通道GPS共视法时频传递接收机系统,硬件部分主要由自主研制的高精度时间间隔计数器和Motorola生产的VPONCORE GPS引擎组成,软件符合时间频率咨询委员会(CCTF)发布的GPS共视法数据处理软件标准化指南的要求,与单通道GPS定时接收机相比,界面更友好,操作更方便,具有很强的分析处理数据功能。经测试证明多通道GPS接收机零基线共钟共视时间比对的不确定度小于4 ns(仰角40°),与国外报道基本相同。     

基于威布尔分布的CFM56-5B发动机风扇润滑间隔调整方法

分析了发动机产生振动的原因,得出风扇叶片润滑是降低发动机振动水平的最有效方法;基于运行数据使用Minitab工具建模,获得润滑后高振动事件的威布尔分布函数,并得到高振动事件概率,结合安全、成本因素等得出最优润滑间隔;通过机队实践,证明了该方法的有效性。     

Precise orbit determination for TH02-02 satellites based on BDS3 and GPS observations

The Tianhui-2 02 (TH02-02) satellite formation, as a supplement to the microwave mapping satellite system Tianhui-2 01 (TH02-01), is the first Interferometric Synthetic Aperture Radar (InSAR) satellite formation-flying system that supports the tracking of BeiDou global navigation Satellite system (BDS3) new B1C and B2a signals. Meanwhile, the twin TH02-02 satellites also support the tracking of Global Positioning System (GPS) L1&L2 and BDS B1I&B3I signals. As the spaceborne receiver employs two independent boards to track the Global Navigation Satellite System (GNSS) satellites, we design an orbit determination strategy by estimating independent receiver clock offsets epoch by epoch for each GNSS to realize the multi-GNSS data fusion from different boards. The performance of the spaceborne receiver is evaluated and the contribution of BDS3 to the kinematic and reduced-dynamic Precise Orbit Determination (POD) of TH02-02 satellites is investigated. The tracking data onboard shows that the average number of available BDS3 and GPS satellites are 8.7 and 9.1, respectively. The carrier-to-noise ratio and carrier phase noise of BDS3 B1C and B2a signals are comparable to those of GPS. However, strong azimuth-related systematic biases are recognized in the pseudorange multipath errors of B1C and B3I. The pseudorange noise of BDS3 signals is better than that of GPS after eliminating the multipath errors from specific signals. Taking the GPS-based reduced-dynamic orbit with single-receiver ambiguity fixing technique as a reference, the results of BDS3-only and BDS3 + GPS combined POD are assessed. The Root Mean Square (RMS) of orbit comparison of BDS3-based kinematic and reduced-dynamic POD with reference orbit are better than 7 cm and 3 cm in three-Dimensional direction (3D). The POD performance based on B1C&B2a data is comparable to that based on B1I&B3I. The precision of BDS3 + GPS combined kinematic orbit can reach up to 3 cm (3D RMS), which has a more than 25% improvement relative to the GPS-only solution. In addition, the consistency between the BDS3 + GPS combined reduced-dynamic orbit and the GPS-based ambiguity-fixed orbit is better than 1.5 cm (3D RMS).     

耐高温复合材料在火星探测器着陆器减速伞筒盖结构上的应用

针对火星探测器着陆巡视器减速伞筒盖结构在轨运行耐温度交变、辐照等空间环境和再入过程耐温度冲击性能需求,重点开展了筒盖复合材料耐温匹配性、力学性能、耐空间环境性能以及制件成型工艺研究。结果表明,选用J-168-1胶黏剂、J-245胶黏剂及T300/QY8911复合材料制备的试件通过各项性能试验考核,均能满足筒盖结构的设计指标要求。筒盖产品力学性能稳定,成型工艺可行性良好,最高瞬时使用温度可达200℃,经历空间环境模拟后力学性能保持率均在80%以上,耐高温、耐空间环境性良好。产品已成功装星发射,并在着陆巡视器落火阶段成功弹出分离,圆满完成使命。     

激光熔化沉积15-5PH沉淀硬化不锈钢组织及拉伸性能

利用激光熔化沉积技术制备15-5PH沉淀硬化不锈钢板,利用金相显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、电子探针(EPMA)技术,对沉积态组织进行分析,测试沉积态组织的室温拉伸性能。结果表明:激光熔化沉积15-5PH不锈钢沉积态组织由沿沉积增高方向贯穿多层外延生长的柱状晶组成,柱状晶内包含多个细长整齐排列的胞状树枝晶,枝晶内为马氏体组织,枝晶间为铁素体;沉积态组织中弥散分布大量细小的NbC析出相,尺寸12～20 nm;15-5PH不锈钢沉积态组织具有良好的力学性能,纵向抗拉强度和延伸率分别为1 128.5 MPa和14.0%,横向抗拉强度和延伸率分别为1 101 MPa和12.25%。