Neural Network aided PMSM multi-objective design and optimization for more-electric aircraft applications

This study uses the Neural Network(NN) technique to optimize design of surfacemounted Permanent Magnet Synchronous Motors(PMSMs) for More-Electric Aircraft(MEA)applications. The key role of NN is to provide dedicated correction factors for the analytical PMSM mass and loss estimation within the entire design space. Based on that, a globally optimal design can be quickly obtained. Matching the analytical estimation with Finite-Element Analysis(FEA) is the main research target of training the NN. ...     

无余量装配技术在复合材料机身结构部段上的应用

提出了在复合材料飞机部段装配过程中采用无余量装配的方法。在产品设计和制造过程中采用数字量传递的方式可减少误差积累,提高协调精度。关键零部件的装配、工装制造等采用激光跟踪仪等数字化测量设备可以确保精确性,并能在装配工艺设计阶段就考虑零部件间的协调安装精度及公差分配要求。通过分析复合材料部段装配特点,并以复合材料机身典型结构为例进行应用研究,阐述了在三维数字化装配过程中具有协调关系的关键零部件无余量装配的工艺流程、方法,从而可实现零部件一次装夹、加工及无反复装配,使装配质量具有良好的稳定性。     

基于线结构光的飞机蒙皮对缝阶差与间隙测量技术研究

针对飞机蒙皮对缝阶差与间隙的数字化检测问题,以线结构光视觉测量技术为基础,提出了阶差与间隙测量模型,从阶差与间隙的尺寸和位置两个方面设计测量方法。使用线结构光视觉传感器完成阶差与间隙的尺寸测量,同时利用iGPS测量系统对视觉传感器的位姿进行实时跟踪测量,从而确定阶差与间隙的测量位置。通过试验验证了算法的正确性和稳定性,能够实现非接触、高精度测量:试验结果表明:5mm内阶差的重复测量精度优于0.04mm,间隙的重复测量精度优于0.05mm。     

面向自动化物料传送的被动驱动托架设计与分析

针对现有的航天飞行器数字化装配生产线产品转运自动化、装配数字化的发展趋势,设计了一套兼容生产线全流程转运工作设备、适应多几何尺寸的托架.在分析作业现场产品转运流程、保证要求以及装配需求的基础上,提出了一种基于辊杠动力源的被动驱动托架总体设计方案,解析了托架关键受力部位和薄弱点,有针对性地开展了关键部件的设计、计算、校核...     

浅析TB200型飞机与SR20型飞机的差异

本文以翼型结构、操纵系统、动力系统和仪表布局四个方面为出发点,阐述了TB200型初教飞机和SR20型初教飞机存在的差异,从机型理论和实际应用方面提出建议,以期为差异改装和教学训练提供帮助。     

JL8飞机重要口盖防雨设计的改进

针对JL8飞机部分重要口盖防雨存在的问题,在查找和分析原因的基础上,提出了解决重要口盖防雨设计的改进措施。     

波音737系列飞机过热探测系统原理分析及排故技巧

轮舱火警、机翼及后下部机身的过热探测系统是飞机防火系统的重要组成部分，且故障发生频繁。本文介绍了波音737系列飞机的轮舱火警、机翼及后下部机身的过热探测系统的基本原理及常见故障，并结合外场维修经验介绍了排除该系统故障的一些技巧。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

基于MATLAB/Simulink的飞机燃油箱内燃油温度仿真计算

燃油温度是飞机燃油箱可燃性评估的关键参数之一。为了研究飞机燃油箱内温度的分布规律及传热模型的正确性,采用MATLAB/Simulink软件平台搭建出了客机的燃油箱热仿真模型。在输入飞行实验所对应的的边界条件后,通过数值模拟获得燃油箱内部各计算节点处的燃油温度。结果表明,在三种不同的航行条件下,燃油箱热模型仿真结果均能较好地与飞行实验结果吻合,能够将计算误差控制在一定范围内。采用该燃油箱热模型进行热仿真数值模拟可以获得较为准确的飞机燃油箱热特性,能够在飞机设计阶段,用于对燃油箱结构以及内热源部件布置的优化。