MA60飞机水上漂浮特性研究

MA60飞机的水漂浮特性是通过从初始淹没深度、漂浮的稳定性、水的渗漏途径、有效漂浮时间和应急撤离时间等方面进行分析和论证的,证明其漂浮特性能满足水上迫降后乘员应急撤离的要求。     

热轧对Ti50Ni50-xAlx(x=1,2,4)形状记忆合金微观组织、相变和力学性能的影响

形状记忆合金的相变和力学性能受机械加工过程影响明显.在850℃下将Ti50Ni50-xAIx(x=1,2,4)形状记忆合金轧制成为板材.采用扫描电镜、透射电镜和X射线衍射对合金的微观结构研究表明:合金由NiTi相和Ti2Ni相组成,Al元素在Ti2Ni相中的固溶度比在TiNi相中高.差示扫描量热分析和电阻-温度测试表明...     

含C60的RDX-CMDB推进剂性能研究

通过燃速、爆热、活化能和温度分布等参数的测试和计算，发现C(60)能显著提高推进剂的火焰温度和燃烧表面温度，降低压强指数，使平台区范围变宽且向高压方向移动，推进剂的爆热也提高约10％。此外从反应机理上提出C(60)-Pbx络合物的催化作用，改善了RDX－CMDB推进剂燃烧性能；富集物（含10％C(60)的烟炱）中C(60)主要以分子状态存在，因此它能把C(60)均匀分散到推进剂中，而且保持C(60)化学活性，比纯C(60)的催化效果更好。     

Experimental research on electrochemical machining of titanium alloy Ti60 for a blisk

Ti60(Ti–5.6Al–4.8Sn–2Zr–1Mo–0.35Si–0.7Nd) is a high-temperature titanium alloy that is now used for important components of aircraft engines. Electrochemical machining(ECM) is a promising technique that has several advantages, such as a high machining rate, and can be used on a wide range of difficult-to-process materials. In this paper, orthogonal experiments are conducted to investigate ECM of Ti60, with the aim of determining the influences of some electrochemical process parameters on the surface roughness. The most important parameter is found to be the frequency of the pulsed power supply. It is found that using suitably optimized parameters for ECM can greatly decrease the surface roughness of a workpiece. A surface roughness of approximately 0.912 lm can be obtained with the following optimal parameters: Na Cl electrolyte concentration 13wt%, voltage20 V, pulse frequency 0.4 k Hz, duty cycle 0.3, temperature 23 °C, and anode feed rate 0.5 mm/min.Furthermore, blisk blades have been successfully processed using these optimized parameters.