BGA封装互连焊点温度及电流密度分布的模拟与验证

芯片互连焊点承受的电流密度越来越大,给电子产品的服役可靠性带来了新的挑战.本文利用有限元软件对BGA封装互连焊点内温度及电流密度分布进行了模拟分析,结果表明:互连焊点的芯片端和基板端存在很大的温度差,在本模拟条件下,最大温度梯度可达到5.38×103K/cm;在焊点的电流入口/出口处存在电流拥挤,其电流密度比平均电流密...     

100 A直流大电流标准及检定系统

介绍了一种新建立的直流大电流标准及检定系统。该系统由直流标准电压源、跨导放大器、零磁通电流互感器、分流器、标准电阻和数字电压表组成 ;直流电流输出范围为 0～10 0A ,不确定度为 5× 10 - 4,直流电流测量范围为 0～ 12 0A ,不确定度为 5× 10 - 5。分析了常用的直流大电流测量方法 ,介绍了系统的硬件设备组成 ,简述了关键设备的基本原理和校准测试方法 ,并给出了测试结果 ,该标准的建立将满足 10 0A以下直流大电流源、直流大电流表。     

电磁铆接放电过程仿真分析

目前,电磁铆接的放电回路主要有两种形式,一种是电容直接对线圈进行放电;另一种是电容对脉冲变压器放电,然后脉冲变压器作用于线圈.     

非额定条件下变压器损耗测量研究

讨论了利用单片机技术测量变压器损耗的基本方法.推导了在非额定电压下测量变压器空载损耗的数学模型及其软件结构.最后给出实践结果.     

Kinetic theory of the current sheath. I. On polarization of an equilibrium current sheath

The basic theme of this paper is the investigation of the polarizing electric fields caused by anisotropy of thermal plasma of a current sheath. The paper provides a generalization of the equilibrium distribution function of the current sheath (Harris function) to the case of temperature anisotropy of plasma along and across the sheath. It appears that solution of the electroneutral equilibrium represents a narrow class of solutions and is true only for certain relations between the parameters of the problem. In the general case, the plasma of a stationary current sheath is polarized. The structure of the current sheath of a magnetosphere tail is investigated with regard to the effect of polarization, and profiles of the polarization electric fields are obtained. This field should be taken into account in the study of current sheath stability.     

Experiment VARIANT – first results from Wave Probe instrument

The international experiment VARIANT was carried out onboard Ukrainian remote sensing satellite SICH-1M launched 2004, December 24. In spite of other than planned satellite orbit and onboard systems failure about 11 telemetric files from VARIANT payload were obtained. Due to episodic and random payload switching the main goal of VARIANT experiment - study of field aligned currents and monitoring of electromagnetic state of the ionosphere – was not possible to realize. However the data analysis from VARIANT instrumentation allowed us to obtain for the first time a reliable confirmation of proper operation in ionospheric plasma of a new device developed for wave activity study – Wave Probe, which consists of compact combination of Split Langmuir Probe working at floating potential and search-coil magnetic field sensor. Such a probe can simultaneously measure variations of one component of spatial current density and a perpendicular component of magnetic field with a spectral sensitivity threshold up to 0.1 pA/(cm² Hz^1/2) and 0.03 pT/Hz^1/2, respectively.     

400Hz电流互感器校验仪的检定

介绍了用功率源法与分流法相结合对电流互感器校验仪进行检定的方法，并给出了检定结果的不确定度。该方法已应用于新研制的400Hz电流互感校验仪的检定，对于工频的电流互感器校验仪的检定也有一定的参考价值。     

一种新型无复位电路的双MOSFET正向变换器

讨论了传统的双MOSFET正向变换器在高频工作时存在的问题。介绍了一种无复位二极管的新型电路和变压器结构。最后给出实验结果。     

输入电压不平衡时的12脉冲自耦变压整流器

在含有较多非线性负载的航空供电系统中常存在三相输入电压不平衡的情况。详细分析了输入不平衡对12脉冲自耦变压整流器(ATRU)的输出电压、输入电流的影响,并提出了采用谐波抑制电抗器(HBR)来抑制谐波电流。分析了工作原理,比较了几种HBR构成方案,研制了一台2kW的演示样机。实验结果表明,谐波抑制电抗器有效抑制了三相输入电压不平衡的影响。     

高温磁悬浮轴承用位移传感器的研究简

 针对差动变压器式位移传感器的性能及其在高温磁悬浮轴承中的应用,对环境温度升高影响差动变压器式位移传感器（DTDS）性能的机理和特征以及所采用的温度补偿技术进行了研究。采用比值方式的处理电路以及加入补偿电阻的方法改善了温度升高所带来位移传感器灵敏度升高、温度漂移和时间漂移的问题。对不同温度下的差动变压器式位移传感器进行标定得到了位移传感器的动静态性能,并将其应用到单自由度高温磁悬浮轴承（HTAMB）试验台上进行静态和模拟动态悬浮。研究结果表明,环境温度为550 ℃,被测物体移动范围在-0.35~+0.35 mm时,位移传感器的灵敏度在19.62 mV/μm,线性度为±0.74%,迟滞性为±0.40%,重复性为±0.97%,传感器截止频率在800 Hz左右;在单自由度高温磁悬浮轴承试验台上使用所研制的高温位移传感器,能实现被悬浮物体的稳定悬浮。