椭圆三体问题中的时间周期不变流形

借助有限时间Lyapunov指数（FTLE）定义拉格朗日拟序结构（LCS）,并以单摆系统为例阐述LCS与动力系统中不变流形之间的联系.利用LCS研究椭圆限制性三体问题（ER3BP）中的时间周期不变流形的性质.采用数值方法验证得到了两点结论：时间周期不变流形的内部是穿越轨道集,外部是非穿越轨道集;时间周期不变流形是轨道的不变集.     

基于漏磁与磁阻系数迭代的三自由度混合型磁悬浮轴承的设计

提出一种基于漏磁与磁阻系数迭代计算的参数设计方法,将软磁材料内部磁场的磁通密度非饱和作为约束条件,以满足最大悬浮力条件下的体积最小化为优化设计目标,通过循环迭代的方式计算各部分漏磁系数与磁阻系数,最后得到该三自由度混合型磁悬浮轴承各部分的结构参数.利用有限元电磁场分析软件对其进行三维电磁场建模与仿真分析,仿真结果验证了该参数设计方法及其结果的合理性与正确性.给出了静态起浮、悬浮、冲击、转速为30000r/min时转轴位移与控制电流的波形.实验结果表明:基于该方法设计出的三自由度混合型磁悬浮轴承具有良好的悬浮特性.      

三维四向编织复合材料细观建模

基于编织过程中携纱器的运动规律,重点分析了编织复合材料内部区域的空间构型,提出了一种改进的细观单胞模型.该模型能够考虑因打紧工艺造成的纤维束轴线弯曲构型以及截面变形,并可以给出编织参数和模型宏细观参数之间的关系,结果表明:该模型比较接近实际结构,材料内部纤维束轴线空间走向为曲线,控制点处纤维束截面为椭圆形假设已接近其真实的截面形状,并且由该模型得出的胞元几何特征数据与试件实测数据较为吻合,对花节长度的预测值最大误差保持在3%左右,在编织角分别为19°,21°和21.5°时,本模型的预测结果更接近实测结果,适用于三维编织复合材料尤其是小编织角结构的建模,可为后续力学性能的分析提供基础.      

基于星载GPS的资源三号卫星精密定轨

资源三号卫星是我国首颗民用立体测图卫星,于2012年1月9日发射。卫星上配备有国产双频GPS接收机。利用非差双频GPS数据,基于卫星动力学原理和事后批处理定轨模式,采用30小时弧段（重叠弧长为 6小时） 对资源三号卫星进行了精密定轨,卫星位置重叠弧段精度平均为4.95cm。利用卫星激光测距（SLR）观测数据对星载GPS定轨结果进行了检核,检核精度优于4cm,无明显系统偏差。结果表明,该定轨精度完全能够满足资源三号卫星任务的要求。     

航天器真空热试验数据可视化系统设计与实现

针对航天器真空热试验测控数据处理现状和需求,通过引入三维数据可视化技术,设计了一种数据可视化系统。该系统运用Java 3D技术,通过虚拟场景设定,将真空热试验试件三维设计模型与热模型结合,实现温度数据—颜色映射,以云图形式显示测控数据,并实现与现有测控软件数据交互。典型试验结果表明:该可视化系统可以实时、真实、直观地显示试件在真空热试验过程中的温度变化情况,为试验过程中的实时温度监视和工况判读提供有效手段。     

Severe disruption of the cytoskeleton and immunologically relevant surface molecules in a human macrophageal cell line in microgravity—Results of an in vitro experiment on board of the Shenzhou-8 space mission

During spaceflight the immune system is one of the most affected systems of the human body. During the SIMBOX (Science in Microgravity Box) mission on Shenzhou-8, we investigated microgravity-associated long-term alterations in macrophageal cells, the most important effector cells of the immune system. We analyzed the effect of long-term microgravity on the cytoskeleton and immunologically relevant surface molecules. Human U937 cells were differentiated into a macrophageal phenotype and exposed to microgravity or 1g on a reference centrifuge on-orbit for 5 days. After on-orbit fixation, the samples were analyzed with immunocytochemical staining and confocal microscopy after landing. The unmanned Shenzhou-8 spacecraft was launched on board a Long March 2F (CZ-2F) rocket from the Jiuquan Satellite Launch Center (JSLC) and landed after a 17-day-mission. We found a severely disturbed actin cytoskeleton, disorganized tubulin and distinctly reduced expression of CD18, CD36 and MHC-II after the 5 days in microgravity. The disturbed cytoskeleton, the loss of surface receptors for bacteria recognition, the activation of T lymphocytes, the loss of an important scavenger receptor and of antigen-presenting molecules could represent a dysfunctional macrophage phenotype. This phenotype in microgravity would be not capable of migrating or recognizing and attacking pathogens, and it would no longer activate the specific immune system, which could be investigated in functional assays. Obviously, the results have to be interpreted with caution as the model system has some limitations and due to numerous technical and biological restrictions (e.g. 23 °C and no CO₂ supply during in-flight incubation). All parameter were carefully pre-tested on ground. Therefore, the experiment could be adapted to the experimental conditions available on Shenzhou-8.     

A direct fusion drive for rocket propulsion

The Direct Fusion Drive (DFD), a compact, anuetronic fusion engine, will enable more challenging exploration missions in the solar system. The engine proposed here uses a deuterium–helium-3 reaction to produce fusion energy by employing a novel field-reversed configuration (FRC) for magnetic confinement. The FRC has a simple linear solenoid coil geometry yet generates higher plasma pressure, hence higher fusion power density, for a given magnetic field strength than other magnetic-confinement plasma devices. Waste heat generated from the plasma?s Bremsstrahlung and synchrotron radiation is recycled to maintain the fusion temperature. The charged reaction products, augmented by additional propellant, are exhausted through a magnetic nozzle. A 1 MW DFD is presented in the context of a mission to deploy the James Webb Space Telescope (6200 kg) from GPS orbit to a Sun–Earth L2 halo orbit in 37 days using just 353 kg of propellant and about half a kilogram of ³He. The engine is designed to produce 40 N of thrust with an exhaust velocity of 56.5 km/s and has a specific power of 0.18 kW/kg.     

航空活塞发动机用自增压喷嘴喷雾特性试验

为了自增压喷嘴更好地在航空活塞发动机上应用,在定容弹内对自增压喷嘴喷雾特性进行了试验研究。采用可视化技术结合Matlab图像处理程序,研究了RP-3航空煤油在不同背压、燃油温度和环境温度下的喷雾特性。结果表明:背压为0.1 MPa时的喷雾有明显的表面波和油线结构。背压从0.1 MPa增大至0.8 MPa,典型的中空锥喷雾转变成有大尺度涡流的中空锥喷雾,喷雾贯穿距离和喷雾面积的最大值分别减小了45%和55.3%。燃油温度的升高促进了喷雾蒸发有助于冷起动,喷雾贯穿距离、喷雾面积和喷雾锥角均在燃油温度为50 ℃时最小。在背压为0.1 MPa时,喷雾贯穿距离和喷雾面积随着环境温度升高先增大后减小,在环境温度为60 ℃和50 ℃分别有最大值67.3 mm和915.5 mm2,而喷雾锥角则随着环境温度升高而减小,在环境温度为90 ℃时达到最小值9.2°。     

防弹陶瓷的研究现状与发展趋势

综述了防弹陶瓷的研究现状,介绍了两种典型的防弹陶瓷。对于Al2O3防弹陶瓷着重于复相结构的分析;对于B4C着重于烧结工艺及陶瓷性能方面的概述。并对防弹陶瓷今后的发展进行了预测,列举了几种较新的防弹陶瓷材料并提出了将纳米复相陶瓷用于防弹方面的设想。     

以Ti/V/Cu、V/Cu为中间层的TiAl合金

用真空扩散连接方法对TiAl/Ti/V/Cu/40Cr钢及TiAl/V/Cu/40Cr钢进行了研究。结果表明,以Ti/V/Cu作中间层的接头拉伸强度高于以V/Cu作中间层的接头强度。界面分析显示,Ti/V、V/Cu、Cu/40Cr钢的各个结合界面处未形成金属间化合物,而TiAl/Ti的结合界面上有Ti3Al产生;在TiAl/V的界面上有Ti3Al、Al3V两种金属间化合物产生;界面上脆性金属间化合物的产生是接头发生断裂的原因。