DD3 单晶粘塑性损伤本构模型研究

介绍了建立DD3单晶高温合金本构模型的理论和过程,详细推导了DD3单晶损伤演化方程,简要分析了模型的组成和特点。简单讨论了模型材料常数的标定方法,具体标定了950℃下的模型材料常数。给出了模型的预测结果和试验结果的对比曲线,从中看出,该模型能够较准确地描述DD3单晶的力学行为特点,可望用于单晶叶片的结构分析。     

反舰导弹半实物仿真系统的可视化设计

介绍了在 Windows 平台上,利用 VC++6.0和 DirectX7.0等软件实现了某型反舰导弹飞行可视化仿真系统的设计,解决了如导弹飞行尾焰、导弹模型实时驱动和视点变换控制等主要问题,并对于在微机平台上以较低成本开发复杂图形仿真系统有一定的现实意义和推广价值。     

图像序列中机动目标三维运动和结构的计算

综合视觉运动分析中的2类处理方法,选取图像中的角点作为特征点,在理论上证明了图像序列的光流场可以近似地用角点的位移场代替。利用已有文献中的建模思想,详细推导出递归计算机动目标三维运动和结构的非线性计算模型,采用广义卡尔曼滤波(EKF)递归地计算图像序列中机动目标的三维运动和结构。合成图像序列和真实图像序列实验结果表明该算法能取得较好的效果。     

北斗三号系统卫星自主完好性监测技术

完好性对于全球卫星导航系统(GNSS)来说至关重要,关乎到其能否被放心应用。卫星自主完好性监测(SAIM)技术,是完好性监测技术发展的前沿趋势,国内外卫星导航系统均竞相发展。介绍了北斗三号系统SAIM技术设计与实现的重要意义,从功能设计和实现原理两个方面,阐述了北斗三号SAIM技术体制。针对SAIM实际在轨监测数据的正态分布特性服从程度和长期稳定性等问题,随机选取某一颗中圆轨道(MEO)卫星自2020年7月31日北斗三号系统正式开通服务以来至2021年7月31日连续1年期间的监测数据,得到真实在轨监测数据的分布特性。最后,提出了告警门限优化、分级告警策略设计、星历完好性自主监测等方面的后续发展必要性建议,旨在为北斗系统更好地为全球用户提供更优质的完好性服务提供参考。     

Mission-oriented cooperative 3D path planning for modular solar-powered aircraft with energy optimization

Modular Solar-Powered Aircraft(M-SPA) is a kind of High-Altitude Long-Endurance(HALE) aircraft which exploits the mission advantage of swarm UAV and the HALE advantage of large aspect-ratio SPA. M-SPA’s separated mode and combined mode give it the potential to maximize the mission efficiency with limited solar energy. In this paper, firstly, oriented by the mission of maximizing the cruise area, the overall design of the M-SPA is modeled, including the energy model, the aerodynamic model and the...     

基于3DS MAX模型的无人直升机实时监控系统三维建模

分析OpenGL中三维建模的主要方法,结合共轴式无人直升机实时监控飞行系统的设计需要,得出利用3DS MAX的输出模型进行三维建模可以大大提高效率。分析3DS MAX主要输出文件的结构,指出OpenGL建模所需的要素。设计并实现了3DS MAX到OpenGL的模型转换模块,能够分离出3DS MAX场景中的三维模型,为在实时监控系统中再现3DS模型并构造监控飞行系统的三维场景提供灵活性。     

整级环境下涡轮叶片型面加工几何偏差影响的不确定性分析

加工等过程中产生的几何偏差会导致涡轮叶片气动性能及工作状态发生显著变化,对该影响的准确评估与合理分析具有重要意义.本文提出了一种考虑三维型面几何偏差对气动性能影响的不确定性计算分析方法,包括随机叶型几何建模、不确定性量化计算和敏感性分析等,并结合某一单级高压涡轮进行分析.基于随机过程理论和主成分分析法,参考现有叶片加工...     

单幅图像的三维重构视觉系统特征点提取算法的研究与实现

实现基于单幅二维图像不标定欧氏重构三维场景的关键技术之一是有效提取彩色伪随机编码图像特征角点。为给图像特征点匹配提供更多的样本信息,采用定位于彩色图像Harris算子探测特征角点,并动态给出角点响应的自适应阈值条件。特征点提取实验及三维欧氏重构结果证实了该方法的适用性和有效性。     

Validation on MERSI/FY-3A precipitable water vapor product

The precipitable water vapor is one of the most active gases in the atmosphere which strongly affects the climate. China's second-generation polar orbit meteorological satellite FY-3A equipped with a Medium Resolution Spectral Imager (MERSI) is able to detect atmospheric water vapor. In this paper, water vapor data from AERONET, radiosonde and MODIS were used to validate the accuracy of the MERSI water vapor product in the different seasons and climatic regions of East Asia. The results show that the values of MERSI water vapor product are relatively lower than that of the other instruments and its accuracy is generally lower. The mean bias (MB) was ?0.8 to ?12.7?mm, the root mean square error (RMSE) was 2.2–17.0?mm, and the mean absolute percentage error (MAPE) varied from 31.8% to 44.1%. On the spatial variation, the accuracy of MERSI water vapor product in a descending order was from North China, West China, Japan -Korea, East China, to South China, while the seasonal variation of accuracy was the best for winter, followed by spring, then in autumn and the lowest in summer. It was found that the errors of MERSI water vapor product was mainly due to the low accuracy of radiation calibration of the MERSI absorption channel, along with the inaccurate look-up table of apparent reflectance and water vapor within the water vapor retrieved algorithm. In addition, the surface reflectance, the mixed pixels of image cloud, the humidity and temperature of atmospheric vertical profile and the haze were also found to have affected the accuracy of MERSI water vapor product.