基于网络的《工程力学》实验系统初探

实验教学是学生获得知识和能力训练的重要途径,工程力学实验是工科院校学生的一门技术基础课。尝试利用现代网络技术和3Dmax软件,结合我校的力学实验课教学,开发一套基于网络的工程力学实验教学系统,作为对理论教学和实验室教学的补充,取得很好效果。     

New He neutron monitor for Chilean Cosmic-Ray Observatories from the Altiplanic zone to the Antarctic zone

We present the results of three years of continuous operations and the principal characteristics of our new ³He neutron monitors installed in the Chilean Network of Cosmic-Ray Observatories. During the years 2004 and 2005, we began the construction of this International Geophysical Year (IGY)-type ³He neutron monitor, with the intention of replacing the older proportional tubes of the BF₃. These new monitors are installed in stations at locations ranging from the near-equatorial zone to the Antarctic zone. As a reference system, we used our own BF₃ neutron monitors and previously complemented the collected data with a Monte Carlo simulation for the proton-yield function response of the Putre neutron monitor. Herein, we present for the first time the data obtained from our new high-mountain observatory located in the Altiplanic zone.     

3D information from 2D images recorded in the European Modular Cultivation System on the ISS

The European Modular Cultivation System (EMCS) on the ISS allows long-term biological experiments, e.g. on plants. Video cameras provide near real-time 2D images from these experiments. A method to obtain 3D coordinates and stereoscopic images from these 2D images has been developed and is described in this paper. The procedure was developed to enhance the data output of the MULTIGEN-1 experiment in 2007. One of the main objectives of the experiment was to study growth movements of the Arabidopsis plants and the effect of gravity on these. 3D data were important during parts of the experiment and the paper presents the method developed to acquire 3D data, the accuracy of the data, limitations to the technique and ways to improve the accuracy. Sequences of 3D data obtained from the MULTIGEN-1 experiment are used to illustrate the potential of this newfound capability of the EMCS. In the experiment setup, a positional depth accuracy of about ±0.4 mm for relative object distances and an absolute depth accuracy of about ±1.4 mm for time dependent phenomena was reached. The ability to both view biological specimens in 3D as well as obtaining quantitative 3D data added greatly to the scientific output of the MULTIGEN-1 experiment. The uses of the technique to other researchers and their experiments are discussed.     

A preliminary Chandra X-ray spectroscopy of the supernova remnant N132D

We present the preliminary results of a Chandra X-ray study of N132D, a young shell-like supernova remnant (SNR) in the Large Magellanic Cloud. The equivalent width maps of emissions from O, Ne, Mg, Si, and S are provided. Spatially resolved spectral analysis for the small-scale regions were tentatively performed. X-ray spectra of the interior can be described with a single-thermal model. The faint interior regions have lower density, higher temperature above 1 keV than that of bright interior regions. The X-ray spectra along the shell can be phenomenally fitted with either a double-vpshock model or a vpshock + powerlaw model. If the non-thermal component is true, N132D would be listed as another X-ray synchrotron SNR.     

基于体绘制的真三维显示中体素路径优化算法分析

由于基于体素的绘制方法所需处理体素数据很大,而体素激活的随机顺序与体数据存储顺序不一致,因此需要在体素激活前对体素按照立体显示的要求进行路径优化.本文针对该问题描述和分析了体素化过程,并提出一个典型的体素化流程.在此基础上,重点分析了流程中的体素路径优化算法,对其进行分析后进行数学建模并转化为TSP问题,最后提出了一个...     

基于二维资源管理的多功能雷达任务调度算法

动态孔径分割技术为相控阵雷达针对不同任务灵活分配孔径资源提供了可能,而传统的资源调度方法仅基于单一孔径条件研究了时间资源的优化分配问题。针对雷达搜索、跟踪与成像任务的自适应调度问题,提出了一种基于时间-孔径二维资源管理的雷达资源调度算法。该算法建立了雷达孔径分割条件下的二维资源调度模型,确立了能量资源约束条件;利用基于压缩感知的稀疏孔径逆合成孔径雷达（ISAR）成像技术,使雷达在完成目标搜索和跟踪任务的同时实现对目标的成像;定义了调度算法性能的评价指标。在仿真实验中将该算法与另外2种算法进行对比,验证了所提算法在高度成功率、二维资源利用率与任务并行度这3种性能指标上具有优越性。     

预测平纹编织C/SiC复合材料等效导热系数的三维纤维随机模型

提出了一种能够刻画平纹编织C/SiC复合材料编织结构的三维纤维随机模型,探讨了微观结构影响宏观等效导热系数的机理。采用蒙特卡罗法模拟纤维位置的随机分布,用有限元法计算等效导热系数,通过数理统计方法分析在不同纤维体积分数下等效导热系数的随机分布规律;并且比较了相同纤维体积分数下,纤维随机模型平均等效导热系数与纤维周期排列模型等效导热系数的差别。结果表明:在不同体积分数下,纤维位置随机等效导热系数都呈高斯分布;纤维随机模型中纤维会出现聚集现象,形成局部“导热热障”,所以纤维随机模型平均等效导热系数小于纤维周期排列模型,这种差异在中等纤维体积分数下最明显。      

Nonlinear bending analysis of a 3D braided composite cylindrical panel subjected to transverse loads in thermal environments

The aim of this study is to investigate nonlinear bending for a 3-Dimensional(3D)braided composite cylindrical panel which has transverse loads on its finite length. By refining a micro-macro-mechanical model, the 3D braided composite can be treated as a representative average cell system. The geometric structural properties of its components deeply depend on their positions in the section of the cylindrical panel. The embedded elastic medium of the panel can be described by a Pasternak elastic foundation. Via using the shell theory of the von Ka′rma′nDonnell type of kinematic nonlinearity, governing equations can be established to get higherorder shear deformation. The mixed Galerkin-perturbation method is applied to get the nonlinear bending behavior of the 3D braided cylindrical panel with a simply supported boundary condition.Based on the analysis of the braided composite cylindrical panel with variable initial stress, geometric parameter, fiber volume fraction, and elastic foundation, serial numerical illustrations are archived to represent the appropriate nonlinear bending responses.     

透波性Si3N4陶瓷铣削加工表面边缘破损实验研究

针对透波性Si_3N_4陶瓷铣削加工过程中易出现边缘破损现象,通过不同铣削深度实验研究了边缘破损类型、产生位置以及切深对边缘破损影响,并分析了边缘破损产生机理,最后提出了边缘破损控制方法。结果表明:当切深为0.4~0.8 mm时,边缘破损主要集中于出口棱边和入刀侧边;且脆性域加工过程中随着切深的增加,边缘破损程度呈现增大趋势;降低切深至≤0.3 mm且采用跟随周边走刀方式,并保证入刀处刀尖线速度方向与进给方向夹角不小于90°,可以有效控制边缘破损。研究为提高透波性Si_3N_4陶瓷铣削加工表面质量提供了技术支撑。     

涡桨发动机总体性能优化设计

为提高非设计状态下发动机总体性能预估精度,发展了0D/2D耦合总体性能预估方法。针对某型3轴涡轮螺旋桨发动机建立了基于T-MATS平台的涡桨发动机总体性能0D仿真模型。对涡桨发动机可用功分配提出了2种优化方案。对原方案和2种优化方案的自由涡轮、尾喷管2个部件进行了2D流道和叶型设计,通过S_1流面与通流CFD计算验证了所设计部件的气动性能满足发动机总体性能指标要求。为提高非设计状态下发动机总体性能预估精度,采用0D/2D耦合总体性能预估方法分析了3种方案。结果表明:优化方案1使发动机当量耗油率在设计、巡航、地面状态分别降低2.1%、1.2%、2.0%。