8802超低频标准相位产生器

８８０２超低频标准相位产生器采用数字技术，用Ｄ／Ａ变换方法产生正弦信号，由单片机控制频率和相位，频率由晶振综合产生，相位可数字预置，频率准确度高至±５×１０￣（－６），相位准确度高至±０．０００２°。介绍了主要技术指标、工作原理、技术特点和误差分析等。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

2. 5D 衍生结构SiO2 f / SiO2 复合材料的经向力学性能

以几种不同的2.5D衍生结构织物为增强体,制备了法向增强、经向增强及经法向增强2.5D Si O2f/Si O2复合材料,比较了上述材料与现有2.5D Si O2f/Si O2复合材料的经向力学性能,并研究了经法向增强2.5D结构复合材料中增强纱比例、纤维体积分数与材料性能之间的关系,对织物结构进行了优化。结果表明,经法向增强2.5D Si O2f/Si O2复合材料的经向力学性能较现有2.5D复合材料有显著提高,该材料在较低密度下(1.6 g/cm3),经向拉伸强度与现有材料(1.65 g/cm3)持平,且经向压缩强度接近现有材料的4.3倍。     

三维数模随动下的机翼结构重量优化

目前,基于快速建模下的重量重心估算系统得到了快速发展。为了进一步提高结构重量估算精度,研究了如何在重量重心快速分析(WCGA)系统环境中构建优化模块。以机翼结构重量优化为例,提出优化流程,对优化模块功能进行分解,给出模型简化要求。以A320飞机机翼为例,对梁和长桁进行优化,结果显示,经过优化,有效减轻了结构重量,且相比于传统的减重优化设计方法,极大提高了计算效率。     

Two years of INTEGRAL result on X-ray binaries

INTEGRAL is the ESA lead International Gamma-Ray Astrophysical Laboratory, successfully launched the 17th October 2002 from Baikonur with a Proton vehicle. In view of the high sensitivity of the two γ-ray instruments IBIS and SPI and their capability to provide at the same time image, spectra and time profiles of all the sources in their wide field of view, a key project was approved as “Core Programme” to obtain deep observations of the Galactic Centre (GCDE) and to exploit regular scan of the whole Galaxy Plane since the beginning of the mission. This paper will briefly review the main astrophysical results obtained in the field of high energy Galactic sources with the INTEGRAL/IBIS γ-ray Imager onboard INTEGRAL, and make a comparison with the previous scenario depicted by the BeppoSAX and RXTE results.     

试论科技论文的语言特点

阐述了科技论文在现代社会中的重要地位和作用，着重探讨科技论文的语言特点。在科技论文中使用多语系语言，且除了使用自然语言符号系统以外，同时大量使用超自然语言符号系统。科技论文要求语言简明、精确，逻辑性强，并严格遵守有关的规范和标准；在语法上则多采用存在句、泛指句和析使句，常用第三人称。     

Ni3Al金属间化合物中空位团稳定构型的计算机模拟研究

本文采用分子动力学方法,对金属间化合物Ni3Al中的点缺陷进行了计算机模拟研究,其中原子间相互作用势采用F-S多体势.通过计算Ni3Al中各种构型的空位团的形成能及结合能,进而分析比较各种构型的空位团的稳定性以及热平衡时的数量,总结了Ni3Al中空位的聚集规律.     

时分式平面—立体电视图像转换器

时分式平面－立体电视图像转换器是由视频图像信号处理电路、控制信号产生电路和液晶眼镜驱动电路三部分构成，根据其构成和工作原理，可采用多种具体电路来实现。     

嵌补式网格技术在三维增升装置绕流数值模拟中的应用

基于Jameson的有限体积方法，采用多块网格技术求解Reynolds平均N－S方程组，对三维增升装置绕流进行数值模拟。提出了新颖的嵌补式多块网格技术，使得网格生成和流场计算得到了明显的简化。计算结果与实验数据吻合良好。     

浅谈Java 2D图象处理技术

本文介绍了Java 2D API的图象处理思想.通过以LookupOp查找表过滤器为例,分析了图象的即时模式模型,即对内存的缓冲区图象进行处理,再绘制到屏幕上的处理技术.同时介绍了利用Java 2D中提供的过滤器对图象数据的过滤操作.