硅氮烷环体的催化聚合及热解制备Si3 N4 材料

采用甲基氢二氯硅烷的氨解产物硅氮烷环体(MHSZ)为原料,以四丁基氟化铵为催化剂,制备了高分子量的硅氮烷聚合物(PHSZ),结合红外、核磁、凝胶色谱仪和热重分析了反应时间对合成的PHSZ结构、组成、分子量和陶瓷产率的影响。考察了低温氨气,高温N2气氛处理工艺对热解产物结构和组成的影响。结果表明,随着反应时间的延长,PHSZ高聚物的分子量提高,热失重降低;采用该热解方式PHSZ可转化为含碳量仅为0.5wt%的Si3N4材料,热解样品在1 600℃时完全结晶,晶相主要是α-Si3N4。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

MSG-3在民用航空器维修大纲制定中的应用

国内民用航空器的研发起步较晚,目前投入运行的国产航空器型号种类和数量都不多,航空器制造厂家在制定维修大纲方面的经验较少.本文对国际上通行的MSG-3维修任务分析方法进行研究,首先介绍MSG-3维修任务分析方法产生和发展的历史背景,以及其在国内民机型号中的应用;然后详细叙述MSG-3维修任务分析方法(包括航空器系统、动力装置维修任务的分析方法,结构检查和区域检查任务的分析方法,以及形成维修大纲的流程和维修任务的后期优化);最后通过对航空器型号的审查经验,总结我国民用航空器制造厂家在制定航空器维修大纲时存在的问题和改进方向.     

基于计划到达时刻的四维航迹规划

为了加速空管自动化与智能化技术的应用与实施,提出了水平航迹与高度/速度剖面分阶段设计的四维航迹规划方法。基于动态时间规整与层次聚类方法实现历史雷达航迹聚类分析,完成水平航迹设计。建立速度剖面规划模型,通过航迹生成器与速度调整器交互协作,精细化控制进场时间,以满足计划到达时间要求。以上海浦东国际机场PINOT进场航班为例实施验证,结果表明,四维航迹规划方法可有效实现航班的计划到达时间,从而减少航班延误,提高终端空域运行效率。     

基于模型的系统工程概述

由于航空领域涉及的系统日益高度复杂,为更好推进基于模型的系统工程(Model Based System Engineering,MBSE)研发体系,通过从当前遇到的问题、推行基于模型的系统工程的必要性、优势、未来的挑战等方面进行了较为详细地阐述.基于模型的系统工程研发体系具有知识表示的无二义、系统设计的一体化、沟通交流的高效率等优势,是未来发展的大趋势.     

一种兼容GPS和BD系统的跟踪环路相干积分方法

在城市、峡谷等复杂环境下,卫星导航信号衰减严重,接收机导航定位性能变差,甚至不能工作,给国民生产生活带来诸多不便.提高接收机弱信号的跟踪能力,研究高性能的卫星导航接收机具有重要的意义和价值.在研究分析GPS、北斗D1导航电文的调制方式和相干积分方法的基础上,构建了一种改进直方图的位同步方法,该方法借鉴直方图的思想,通过设定比特跳变的统计门限上限和多组门限下限找到比特跳变边沿.在此基础上设计实现了一种长时间相干积分方法,该方法兼容GPS电文和北斗D1导航电文,可以有效地消除导航电文跳变或者NH码跳变带来的比特翻转.最后,在FPGA平台验证了该方法可以有效提高信号信噪比,以及接收机在弱信号环境下的跟踪能力.     

温度对飞机燃油射流泵工作特性影响

建立了射流泵数学模型,采用数值计算方法对其工作特性进行了模拟,搭建了实验台,采用RP-3燃油,通过实验数据验证了模型的正确性.在此基础上,分别选择了RP-3和JET-A两种燃油,计算了从-40℃~40℃温度下,不同操作压力对射流泵流量比的影响.结果表明:燃油温度高于0℃时,温度对射流泵工作特性影响并不明显,随着温度的降低,射流泵性能与标准温度下（20℃）偏差越来越大,且压比越高此偏差越明显.当温度高于0℃时,采用RP-3和JET-A燃油性能相差不大,RP-3燃油性能略优于JET-A燃油,但是在低温下,RP-3燃油性能远高于JET-A燃油.因此当燃油温度较低且压比较高时,必须充分考虑温度对射流泵特性的影响.      

Al/Ni含能多层膜在Al2O3陶瓷/不锈钢焊接中的应用

采用磁控溅射设备,生长AuSn合金做焊料层、Al/Ni含能多层膜做热量提供层,实现了不锈钢和Al_2O_3间的异质材料自蔓延高温扩散焊。利用SEM、XRD和DSC等测试手段表征AuSn合金和Al/Ni含能多层膜的微观形貌、相成分和放热量;用万能试验机测试焊接接头的力学性能。结果表明,AuSn合金的质量比基本达到80∶20,而多层膜的层状结构清晰,反应热达到1 239 J/g。焊接实验结果表明,仅使用AuSn焊料时,剪切强度仅为46 MPa,在增加Al/Ni含能多层膜后,其剪切强度可达90 MPa,强度提高了约一倍。焊接接头的界面显微形貌和相结构研究表明,剪切强度的增强主要是Al/Ni多层膜提供了额外能量使得界面处的反应剧烈,陶瓷金属化层与中间层的反应加剧,形成了新的反应生成物。     

面向一体化计算的整体式液体冲压发动机建模及性能评估

为发展冲压发动机性能工程预估方法,建立了面向一体化计算的整体式液体冲压发动机性能计算模型,并使其兼容基团贡献算法,提高了拓展性。利用模型分析了冲压发动机在攻角0°～6°、高度0～18km、马赫数2.0～3.5、余气系数1.0～2.9范围工况多维度连续变化下,比冲、推力系数和燃油质量流量的速度-高度特性、高度-节流特性、节流-速度特性以及攻角特性。研究结果表明:性能计算模型可在一体化计算条件下、基团贡献算法允许范围内,不依赖试验数据对冲压发动机性能预估,计算结果与技术参考值相比相对误差均小于14%。推力系数和比冲具有基本一致的速度-高度特性和相似的高度-节流特性,受燃气组分影响,推力系数和比冲的节流-速度特性差异明显。燃油质量流量的变化规律不同于比冲和推力系数,在进入平流层后呈现折缓趋势,而呈现连续性,速度越大、高度越低、余气系数越小,燃油质量流量越高,反之则越小。引入攻角以后,攻角越大,比冲和推力系数越低,进气道起动马赫数越高;攻角-起动马赫数曲线小范围内近似线性,攻角超过5.6°非线性加剧。