Experimental study of partially-cured Z-pins reinforced foam core composites：K-Cor sandwich structures

This paper presents an experimental study of a novel K-Cor sandwich structure rein- forced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry （DSC） and optical microscopy （OM） methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel （CDP） tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechan- ical performances of K-Cor sandwich structures.     

纳米金刚石改性LLDPE的非等温结晶动力学

采用X射线衍射(XRD)、偏光显微镜(POM)以及差示扫描量热(DSC)法,考察了纳米金刚石(Nano-diamond)对线型低密度聚乙烯(LLDPE)的结晶形态以及非等温结晶行为的影响。通过Jeziorny法和莫志深法研究了复合材料的非等温结晶动力学,并利用Kissinger方程计算了LLDPE/Nano-diamond复合材料的非等温结晶活化能。结果表明:Nano-diamond是一种有效的成核剂,为LLDPE结晶提供了更多的活化晶核,起到了异相成核的作用,既提高了LLDPE的结晶起始温度To、结晶峰值温度Tp和结晶速率,又降低了球晶的尺寸,使得球晶的分布更为均匀致密;添加Nano-diamond使得复合材料的结晶迁移活化能降低,当Nano-diamond含量为1%时,复合材料结晶活化能达到最小值。     

基于三维激光成像系统的相机标定方法

三维激光成像系统中点云数据与影像数据的融合可以对被扫描物体赋予真彩色.为了获得点云数据与影像数据良好的融合效果,就需要精确的确定载体坐标系与相机坐标系之间的关系.本文针对三维激光成像系统点云模型真彩色处理方法进行研究,提出了一种基于三维激光成像系统的相机标定方法.通过对相机坐标系的标定,建立点云数据与影像数据之间的数学模型.实验结果显示,采用所提出的方法,能够使得三维立体点云数据与影像数据精确融合.最终得到被扫描目标的真彩色3D模型.     

嫦娥三号动力落月段轨迹确定策略

针对CE-3（嫦娥三号）月球探测器动力下降弧段,特别是悬停避障段频繁机动的特点,提出了采用B样条函数逼近方法进行落月轨迹确定.仿真分析表明：在动力下降运动较平滑弧段,B样条逼近法计算结果略优于多项式拟合法;而在频繁机动弧段,B样条逼近法有明显优势.计算结果表明,加入VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）数据后能有效提高落月轨迹确定精度,在没有系统误差的情况下联合定位后位置精度优于50 m.此外,还分析了三向测量系统差对定位的影响,可对CE 3任务提供参考.最后对CE 3实测数据进行处理,动力落月段末点位置和着陆器定位计算值相差不到200 m.     

基于机载单天线雷达一维距离数据的地表三维信息优化重建方法

陆地的刚体表面在机载雷达的任意相对运动下具有几何不变性,基于此约束可利用雷达距离像中提取出的地面多个强散射点的一维距离数据,重建出地表的三维信息以及载机未知的运动轨迹.鉴于现有基于雷达远场假设的重建方法无法适用于具有较大近场误差的地面目标重建的问题,提出一种基于雷达近场几何模型的优化重建方法,采用非线性优化方法实现了对...     

A New Single-blade Based Hybrid CFD Method for Hovering and Forward-flight Rotor Computation

A hybrid Euler/full potential/Lagrangian wake method,based on single-blade simulation,for predicting unsteady aerodynamic flow around helicopter rotors in hover and forward flight has been developed.In this method,an Euler solver is used to model the near wake evolution and transonic flow phenomena in the vicinity of the blade,and a full potential equation(FPE) is used to model the isentropic potential flow region far away from the rotor,while the wake effects of other blades and the far wake are incorporated into the flow solution as an induced inflow distribution using a Lagrangian based wake analysis.To further reduce the execution time,the computational fluid dynamics(CFD) solution and rotor wake analysis(including induced velocity up-date) are conducted parallelly,and a load balancing strategy is employed to account for the information exchange between two solvers.By the developed method,several hover and forward-flight cases on Caradonna-Tung and Helishape 7A rotors are per-formed.Good agreements of the loadings on blade surface with available measured data demonstrate the validation of the method.Also,the CPU time required for different computation runs is compared in the paper,and the results show that the pre-sent hybrid method is superior to conventional CFD method in time cost,and will be more efficient with the number of blades increasing.     

反辐射导弹趋向多目标打击能力

美国的新型反辐射导弹AARGM已经具备了打击非辐射源目标的多目标打击能力,这种能力将给反辐射导弹作战领域带来革命性的变化。近年来,以多模导引头技术、多模战斗部技术为代表的多种相关技术发展迅速,反辐射导弹正在进入一个崭新的＂多目标＂发展时期。     

低纬Pc3脉动和电离层电流体系

假设在低纬地区有一根磁力线振荡,从基本方程出发,推算出地面各点的磁场扰动情况,模拟低纬Pc3脉动。对比低纬地区Pc3脉动的观测结果,可以看出用这种理论数值模拟的结果基本上与观测事实相符,用它可以初步解释低纬Pc3脉动的频率特性和偏振特点。     

图形交互自动编程及对三维曲面的处理

作为一种新型的计算机辅助编程技术，图形交互自动编程正在走进更多的企业。本文介绍了这种编程方法的特点和基本步骤，重点阐述了利用这种办法处理传统编程方法不易解决的三维曲面编程问题。     

MD5算法在双机热备份信息同步中的应用

在双机热备份算法中,主服务器与备份服务器之间保持信息及时同步至关重要,但传统的主备信息同步方式在效率和可靠性方面却存在着一定的缺陷。为更好地提高主备信息同步效率,本文提出采用MD5(M es-sage D igest 5)算法,对主服务器与备服务器的同步信息进行信息摘要运算,转化为定长字节的信息流后再进行同步。实践应用证明该方法可快速侦测出主、备服务器同步信息的差别,提高双机热备份信息同步的效率。