白炽灯色温测量装置电路设计

介绍利用单片单板机接口电路完成对６Ｖ、３０Ｗ白炽灯光源与其对应的标准白炽灯光源的色温比对标定工作。     

三坐标测量机空间误差的快速检定方法

提出了一种使用Ｒｅｎｉｓｈａｗ检查规检定三坐标测量机或数控机床空间误差的快速方法，此方法一次测量即可完成包含Ｘ、Ｙ、Ｚ三个坐标轴的各项误差影响的空间误差的检定，具有速度快、效率高、准确可靠等特点。     

3D Imaging of the OH mesospheric emissive layer

A new and original stereo imaging method is introduced to measure the altitude of the OH nightglow layer and provide a 3D perspective map of the altitude of the layer centroid. Near-IR photographs of the OH layer are taken at two sites separated by a 645 km distance. Each photograph is processed in order to provide a satellite view of the layer. When superposed, the two views present a common diamond-shaped area. Pairs of matched points that correspond to a physical emissive point in the common area are identified in calculating a normalized cross-correlation coefficient (NCC). This method is suitable for obtaining 3D representations in the case of low-contrast objects. An observational campaign was conducted in July 2006 in Peru. The images were taken simultaneously at Cerro Cosmos (12°09′08.2″ S, 75°33′49.3″ W, altitude 4630 m) close to Huancayo and Cerro Verde Tellolo (16°33′17.6″ S, 71°39′59.4″ W, altitude 2272 m) close to Arequipa. 3D maps of the layer surface were retrieved and compared with pseudo-relief intensity maps of the same region. The mean altitude of the emission barycenter is located at 86.3 km on July 26. Comparable relief wavy features appear in the 3D and intensity maps. It is shown that the vertical amplitude of the wave system varies as exp (Δz/2H) within the altitude range Δz = 83.5–88.0 km, H being the scale height. The oscillatory kinetic energy at the altitude of the OH layer is comprised between 3 × 10⁻⁴ and 5.4 × 10⁻⁴ J/m³, which is 2–3 times smaller than the values derived from partial radio wave at 52°N latitude.     

Comparing topside and bottomside-measured characteristics of the F2 layer peak

The ionospheric characteristics of the F2 layer peak have been measured with ionosondes from the ground or with satellites from space. The most common characteristics are the F2-peak density NmF2 and peak height hmF2. In addition to these two parameters this paper studies the F2-peak scale height. Comparing the median values of hmF2 and NmF2 obtained from topside and bottomside sounding shows good agreement in general. The Chapman scale height values for the F2 layer peak derived from topside profiles, H_m,top, are generally several times larger than H_m,bot derived from bottomside profiles.     

增强碳/碳球锥切削中的最小热应力优化研究

对将增强碳/碳纤维块体切削成球锥外形的工艺,块体热膨胀系数异性轴指向可以极大地影响球锥热应力大小,存在优化设计的潜力。本文对增强碳/碳不同主轴方向弹性模量比值下的球锥最小热应力优化特性进行了研究,发现以1为界,不同模量对比关系下的优化特征是完全不同的。在本文加热条件下,当异性轴模量小于同性面模量时,优化曲线对温度场变化很敏感,以块体异性轴和球锥横截面成±42.9夹角时热应力最小;当异性轴模量大于同性面模量时,优化曲线随加热时间变化不大,以块体同性面与球锥对称轴平行或成小锐角时热应力最小。一般而言,工艺设计中应避免用模量大的主轴方向指向球锥对称轴方向。     

二维系统一般模型的正实控制

本文研究的是二维系统一般模型的正实控制。本文的目的是针对该模型,设计一个状态反馈控制器,使得闭环系统是稳定的并且闭环传递函数是延展严格正实的,所得到的解是通过线性矩阵不等式给出,通过解决该线性矩阵不等式可获得期待的状态反馈控制器。最后,我们提供了一个数值算例来验证提到方法的有效性。     

A/D和D/A转换特性参数测试方法

简要介绍了A/D、D/A转换器的主要测试参数,着重讨论转换特性参数的测试方法及其在混合集成电路测试系统上的实现;同时还介绍了A/D、D/A转换器的一些其他测试方法。     

将日本文化融入到二外日语教学的始终

每一种语言的形成和发展都与其社会环境密切相连，语言同时反映出一个国家和民族的历史和文化。从这个层面上说，教授语言同时也是在教授文化，学习语言的同时也是在学习文化。一个科学的语言教学体系，必须将文化教学紧密融入到语言的教学当中。鉴于当前的高校二外日语教学中鲜有独立开设日本文化课的情况，将日本文化融入到二外日语教学的始终，将会有效帮助学生在有限的学习时间里取得良好的学习效果。本文针对现阶段高校二外日语教学的特点，探讨了在日本文化背景下进行二外日语教学的重要性，并提出了一些文化导入的内容与方法。     

P2P网络下载行为的合理使用分析

P2P技术下载广泛存在，各国司法实践中对其是否属于合理使用态度不一。以美国版权法中确立的“四个检验标准”为依据，对P2P技术网络下载行为是否属于合理使用进行了分析，最后得出该行为不属于合理使用的结论。     

Comparative study of productivity of the Rosetta target Comet 67P/Churyumov-Gerasimenko

In an attempt to evaluate correlations between several properties of comets we report the results of a cometary research involving a criterious analysis of gas and dust mass production rates in Comets 67P/Churyumov-Gerasimenko (main target of Rosetta Mission), 1P/Halley, Hyakutake (C/1996 B2), and 46P/Wirtanen and make a comparison between them.