Image restoration of the asymmetric point spread function of a high-resolution remote sensing satellite with time-delayed integration

The calibration and validation team of the Korea Aerospace Research Institute has calibrated and validated the image data of the KOMPSAT-2 since the launch of KOMPSAT-2 on July 28, 2006. The asymmetric phenomenon of the point spread function of the KOMPSAT-2 image data is evident in both the along and the across direction, most likely because KOMPSAT-2 has a 1 m ground sample distance high-resolution camera with time-delayed integration. Furthermore, because KOMPSAT-2 is in space, the KOMPSAT-2 image data has been corrected with good results by means of modulation transfer function compensation.     

A novel surrogate modeling strategy of the mechanical properties of 3D braided composites

In this paper, a surrogate-based modeling methodology is developed and presented to predict the elastic properties of three dimensional (3D) four-directional braided composites. Using this approach, the prediction process becomes feasible with only a limited number of training points. The surrogate models constructed using Finite Element (FE) method and Diffuse Approximation, reduce the computational time and cost for preparing experimental samples. In the FE model, multiscale method is applied to couple the computations of elastic properties at microscale and mesoscale. Subsequently, a parametric study is performed to analyze the effects of the three design parameters on the elastic properties. Satisfactory results are obtained via the surrogate-based modeling predictions, which are compared with the experimental measurements. Moreover, the predictions obtained from surrogate models concur well with the FE predictions. This study orients a new direction for predicting the mechanical properties based on surrogate models which can effectively reduce the sample preparation cost and computational efforts.     

基于网络的GPS时钟信号发布系统

从空管的实际应用出发,本次研究尝试以TCP Server/Client的模式进行GPS时钟信号的网络发布,通过这种方式实现多套系统灵活的时钟信号引接。     

基于B/S的空管自动化综合航迹显示系统的设计与实现

提出一种基于B/S的综合航迹显示系统,该系统通过解析空管自动化系统的综合航迹实现了在IE浏览器上对区域内的航迹的监视。系统实现主要包括三部分:一是综合航迹的接收,主要通过对同步串口卡的数据读取;二是对数据的数据库处理;三是对综合航迹的显示。系统实现了对MH4008003类数据的解析以及对空管自动化系统的地图解析,并且在IE界面上提供了航迹态势显示以及用户交互接口。     

外翼上壁板根部连接形式对飞机承载能力的影响研究

在飞机结构设计中,外翼上壁板根部连接处结构形式对飞机的传力、变形、承载能力具有重要影响.通过对3种不同形式的上壁板根部连接方案进行压缩试验,研究各方案的承载能力、破坏方式.通过三维有限元方法,计算了连接部位的主要螺钉所分配的载荷,研究了长桁根部斜角对结构屈服载荷的影响,得到了最优的选型方案.     

Bursts in the HETE-2 catalogue

We have studied a set of GRBs detected by HETE-2 satellite with special focus on low-energy part of the spectrum. Results of data reduction procedures of different members of the HETE collaboration were combined with other publicly available information creating a concise catalogue. A more detailed analysis of lightcurves of the prompt emission was performed using data from FREGATE instrument.     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

基于T-S模糊模型的模糊大系统的混合滤波

针对非线性大系统内部过程参数的检测估计,采用连续模糊大系统模型,利用lyapunov定理和分布式处理方法,给出了模糊大系统的H2/H∞混合滤波器设计方法。该方法在保证滤波误差系统全局稳定的同时,具备了H2/H∞性能。通过求解线性矩阵不等式,可以得到滤波器参数。最后,用一个数值例子验证了该方法的正确性和有效性。     

纤维增韧陶瓷基复合材料的比例极限应力与残余热应力关系

从细观力学角度分析并建立了纤维增韧陶瓷基复合材料从制备温度冷却到室温过程中产生的残余热应力与复合材料的比例极限应力的关系模型。该模型表明,减少复合材料的残余热应力或提高复合材料的纤维与基体的模量比,均可提高复合材料的比例极限应力。通过单调拉伸实验测试了先驱体浸渍裂解法(PIP)制备的2D SiC/SiC复合材料的比例极限应力,并采用文中建立的比例极限应力与残余热应力关系模型,计算出复合材料SiC基体的残余热应力为-19.5 MPa。分析表明,该结果是合理的。此外,引用了公开文献报道的5种复合材料体系数据,用于验证文中所建立的比例极限应力与残余热应力关系模型的适应性和可靠性,计算结果与实验结果最大误差为18.6%,表明该模型具有较好的适应性和可靠性,可为纤维增韧陶瓷基复合材料的研究提供新思路。     

A coupling VWM/CFD/CSD method for rotor airload prediction

A coupling fluid-structure method with a combination of viscous wake model(VWM),computational fluid dynamics(CFD) and comprehensive structural dynamics(CSD) modules is developed in this paper for rotor unsteady airload prediction. The hybrid VWM/CFD solver is employed to model the nonlinear aerodynamic phenomena and complicated rotor wake dynamics;the moderate deflection beam theory is implemented to predict the blade structural deformation; the loose coupling strategy based on the ‘delt method' is used to couple the fluid and structure solvers.Several cases of Helishape 7A rotor are performed first to investigate the effect of elastic deformation on airloads. Then, two challenging forward flight conditions of UH-60 A helicopter rotor are investigated, and the simulated results of wake geometry, chordwise pressure distribution and sectional normal force show excellent agreement with available test data; a comparison with traditional CFD/CSD method is also presented to illustrate the efficiency of the developed method.