Orbit insertion error analysis for a space-based gravitational wave observatory

Constellation is required to be highly stable over several years for a space-based gravitational wave observatory. However, the stability of the constellation can be affected by orbit insertion errors. The effects of orbit insertion errors on the constellation are mainly studied in this paper. Firstly, Monte-Carlo, Unscented Transformation Covariance Analysis Method (UTCAM) and Spherical Simplex Unscented Transformation Covariance Analysis Method (SSUTCAM) are used for simulation. The results indicate that UTCAM and SSUTCAM are highly efficient in calculating, with a relative error of less than 6%. Therefore, it is concluded that because of their accuracy and high efficiency, UTCAM and SSUTCAM can be adequately used in orbit insertion error analysis for a space-based gravitational wave observatory. Secondly, SSUTCAM is used to study the effects of position and velocity errors on the constellation. For the case in this paper, when the position error does not exceed 300 km, and the velocity error does not exceed 4 cm/s, the constellation remains stable.     

不同半径圆柱诱导CH4/空气预混燃烧的计算研究

本文研究不同半径圆柱诱导CH4/空气预混燃烧流场。采用保自由流5阶WENO格式求解贴体坐标变换后的多组分Euler方程,用基元反应模型描述CH4/空气燃烧。不同于标准WENO格式通量构造方法,该WENO格式数值通量由方程的解进行WENO插值得到,在曲线坐标系下具有保自由流性质。首先给出了保自由流WENO格式精度和保自由流的数值验证,然后计算圆柱诱导CH4/空气预混气燃烧流场,并考察不同半径圆柱的影响,给出燃烧流场压力与温度等值线和云图、压力和温度沿过驻点线分布。结果表明:在考核计算结果网格无关性基础上,该WENO格式可准确地捕捉激波和火焰阵面形状、激波和火焰面驻点距离,得到的计算结果和文献结果相符。增大圆柱半径,激波和火焰面被推向来流方向,激波和火焰面之间距离也减小。和TVD格式相比,5阶WENO格式采用四分之一的网格数可得到近似相同的计算结果。     

正弦波型高频动态压力光学校准系统及其应用

动态压力是气动部件表面的关键气动参数。光学压力敏感涂料（PSP）测量技术在测量气动部件表面动态压力方面具有全域测量、不影响流场自身的优势，而光学压力敏感涂料的动态响应特性则是进行动态压力测量的决定性因素。基于声学驻波管原理，自主设计并组建了正弦波型高频动态压力光学校准系统，主要包含有驻波管型校准舱、声源、激光源、高频压力传感器、光电倍增管以及测控系统。对动态压力光学校准系统及某新型快响压敏涂料的实验结果表明，所组建的动态压力校准系统可产生最短响应时间12.5 μs、最大压力幅值为4.37 kPa的正弦型动态压力，其有效动态频响范围为0.4~20.0 kHz（50 μs~2.5 ms），不确定度小于0.004 9%；校准系统合理的光路布局可进行快响压敏涂料动态特性的校准，所测涂料可用于动态频响不高于9.1 kHz（响应时间为109.9 μs）的非定常流场的压力测量。     

Modified micro-mechanics based multiscale model for progressive failure prediction of 2D twill woven composites

To consider fiber random distribution at the microscale for the multiscale model based on the micro-mechanics failure (MMF) theory, clustering method is used for the extraction of amplification factors. As the clustering method is a kind of unsupervised machine learning method, the elements with similar mechanical behavior under external loading can be included in a cluster automatically at the microscale. With this modification, the fiber random distribution model can be used for multiscale damage analysis in the framework of MMF theory. To validate the modified multiscale analysis method, progressive damage analysis of a kind of 2D twill woven composites is conducted based on different microscale models. The stress values for microscale models with fiber hexagonal and random distribution patterns are compared first. Much higher stress concentration is generated in the fiber random distribution model due to the smaller inter-fiber distance especially under longitudinal shear loading. The obtained cluster distribution results exhibit the characters of the stress distribution in the two microscale models. Thereafter, tensile and compressive responses of the 2D twill woven composite are predicted with the modified multiscale analysis method and accuracy of the method is verified through comparison with published experimental results. From the simulation results, it can be found that the matrix damage initiation from the model based on the fiber random distribution model is premature compared with that from the model based on the fiber hexagonal distribution model. Besides, under tensile loading, the damage all initiates from the fill tows and propagates to the wrap tows. However, under compressive loading, the matrix damage initiates from the wrap tows in the model based on the fiber random distribution model.     

Influence of uniaxial tensile pre-strain on forming limit curve by using biaxial tensile test

This paper focused on the effect of pre-strain on forming limit curves (FLC) of 5754-O aluminum alloy sheet through utilizing biaxial tensile approach. Based on Swift model and Yld2000-2d yield criterion, the dimensions of cruciform specimen was optimized through applying finite element method for increasing the strain at specimen center. After that, with the recommended specimen size, the cruciform specimen was tested under various stroke ratios to experimentally characterize the limit strains under different pre-strain levels. Subsequently, the biaxial tensile tests were simulated by Abaqus to obtain the limit strains and validate the material models. It can be observed in both experiments and simulations that the pre-strained uniaxial tension followed by plane tension or equi-biaxial tension can improve the formability of sheet metals. Besides, the strain path change affects the trend of first derivative of strain rate difference between neighboring points with respect to time. An early increase occurred and then fell back to the stable value, the steady evolution continued until to a new increase reaching the critical value. The M–K prediction approach was simulated to verify the influence of pre-strain on FLC. It can be found that the early increase peaks of the major strain incremental ratio rose with the amplitude of pre-strain. Finally, the phenomenon of pseudolocalization caused by the strain path change was explained through evolution of stress state inside the groove.     

考虑气穴影响的2D压力伺服阀稳定性

为研究双自由度（2D）压力伺服阀工作时的气穴现象对阀芯稳定性的影响，利用AMESim中的基本库和HCD库建立2D压力伺服阀各组件仿真模型。理论分析得出气穴现象会降低阀体中含气油液的有效体积弹性模量，得出考虑气穴影响的阀芯稳定性条件。仿真结果表明气穴现象会导致主阀芯到达稳定位置后出现振荡现象，影响主阀芯的穿越频率从21 Hz降低至6 Hz，限制主阀芯的频宽，适当增加主阀芯阻尼比能提高主阀芯工作稳定性。提出一种新型阻尼活塞结构，建立模型分析得出其能在不影响伺服阀频响、阀芯位移和抗污染能力情况下提高主阀芯阻尼比以提高阀芯工作稳定性，并且设计实验进行验证。实验结果表明，应用阻尼活塞将2D压力伺服阀压力输出波动从9%降低至2%，能够提高飞行器制动时刹车阀工作稳定性。     

压力波对垂直管低温气液掺混冷凝的影响

为了分析高压补燃液氧煤油发动机氧泵间管内气液两相掺混冷凝及其压力波传播过程,建立了可产生压力扰动的垂直管低温气液两相掺混实验系统,以氧气/液氧为实验工质,开展压力波对垂直管内低温气液两相掺混冷凝的影响研究,获得了不同压力波频率和氧气流量工况下的掺混图像,分析结果表明:压力波会使发散流型由微弱振荡冷凝向间歇振荡冷凝转变,使椭圆流型由稳定冷凝向振荡冷凝转变;在0~52 Hz不同频率压力波作用下,发散流型最大轴向冷凝长度与掺混孔径之比在10~30之间,椭圆流型的比值在8~15之间变化;压力波对气相摆动频率起主导性和正相关性的影响。     

光电微系统技术发展综述

光电微系统具有探测精度高、处理速度快、传输通量大等优势,在信息传输、目标探测和光子处理等方面具有广泛应用。本文综合国内外光电微系统产品和技术现状,重点从信息传输、目标探测和光子处理三个方面展开叙述,讨论了激光器、调制器、波导等光电器件,并对三维集成技术和光电微系统平台进行简介。简述了国内外有关光电微系统的发展计划,提出了国内发展独立的微系统平台和相关技术的迫切性和必要性。     

等离子体气动激励控制超声速边界层分离的实验研究

等离子体气动激励与超声速气流相互作用已成为高速流动控制领域的研究热点。激波与边界层相互作用现象广泛存在于超声速飞行器之中。本文进行了等离子体气动激励控制压缩角区和激波诱导边界层分离的实验,通过流场纹影显示和壁面静压测量,研究等离子体气动激励如何影响激波、激波如何影响边界层特性的科学问题。实验结果表明:施加毫秒量级表面电弧放电能够前移压缩角区的诱导斜激波,使分离区后移,分离区域增加,但激波强度减弱,流场总压增加;施加微秒量级表面电弧放电能够抑制激波诱导边界层分离,使分离区减小,流场总压减小。基于实验结果,认为毫秒量级表面电弧放电激励控制超声速气流的主要机理为放电过程的焦耳热效应;微秒量级表面电弧放电激励控制超声速气流的主要机理为焦耳热效应和冲击波效应共同作用。