合金化及热处理对Fe_3Al合金组织和性能影响

研究了不同的热处理条件及添加Mn,Mo,Nb,Cr,V,RE（La-Ce）等合金元素对Fe3Al合金组织和性能的影响。结果表明,Fe3Al合金在B2相区间保温淬火后的硬度值较小,在DO3相区短时间回火硬度值大幅增加,随回火时间延长硬度值呈降低趋势,在本实验的最长回火时间内（50h）硬度稍有提高;TEM分析表明,这与回火过程中DO3畴的尺寸变化有关;合金化后Cr和V的加入降低合金硬度,其它几种元素都提高了合金的硬度;SEM分析表明合金元素的作用机理不同：Cr软化了合金,Mo主要产生固溶强化,Mn、V、Nb加入后有第二相析出,RE元素主要偏析在晶界,细晶强化。     

腐蚀/疲劳交替作用下飞机金属材料疲劳寿命计算方法

 使用环境下飞机金属结构剩余寿命评定是确定飞机结构疲劳寿命与日历寿命关系的关键。为此,本文模拟飞机结构经历的"地面腐蚀+空中疲劳"过程,提出了腐蚀/疲劳交替作用下飞机金属材料的疲劳寿命计算方法。首先,通过分析2A12-T4铝合金试样预腐蚀/疲劳试验结果,发现其在模拟腐蚀/疲劳交替作用时计算得到的疲劳寿命偏于保守。随后,根据2A12-T4铝合金试样真实的交替试验结果,采用回归算法,建立了基于均匀分布耦合损伤形式的腐蚀/疲劳交替寿命计算模型;并分别采用BP、Elman神经网络对上述模型的计算结果进行验证。结果表明,本文提出的均匀分布耦合损伤模型计算结果与真实试验结果吻合较好;通过进一步的计算与试验对比发现,该模型也可以用于加载循环与腐蚀周期组合发生变化时的疲劳寿命预测,具有较好的适用性。     

大尺寸弹丸喷丸成形2024-T351铝合金表面质量研究

针对2024-T351铝合金进行直径3mm大弹丸喷丸成形及直径0.58mm小弹丸喷丸强化试验,观测试样在不同喷丸参数下的表面形貌,并对表层显微硬度及残余应力分布进行测试,为整体壁板喷丸成形的工艺设计提供重要依据。     

Thermal performance of a 3D printed lattice-structure heat sink packaging phase change material

Thermal storage technology is becoming more and more significant with the increase of high-power equipment in space applications. In this paper, 3D printing technology and Phase Change Material (PCM) were combined into a Thermal Energy Storage (TES) system, which could fulfill the requirements of light weight and high thermal conductivity. A 3D-printed lattice-structure TES plate with N-tetradecane as the PCM and aluminum alloy as the thermal conductivity enhancer was manufactured, and experimentally tested in a thermal vacuum chamber. In addition, a simplified simulation model of the lattice cell was established to clearly analyze the heat transfer process of the TES plate. The effects of initial temperature distribution and heat load gradient on the thermal storage performances were investigated experimentally and theoretically. The equivalent thermal conductivity of the 3D-printed lattice-structure TES plate turns out to be 13 times of the pure PCM thanks to the aluminum skeleton. The heat transfer enhancement appears at the end of the phase change stage due to the sudden mixture of the PCM with different temperature. The simulation results agree well with the experimental data. The equivalent thermal conductivity obtained by the phase change simulations are a little higher than those of the experiments, which is mainly caused by the initial uneven temperature distribution in the tests. Additionally, the effects of non-uniform heat load and the presence of the PCM in the TES plate are studied. This work successfully validates the feasibility and effectiveness of 3D printing technology and TES technology for the temperature control in space applications.     

异型截面三维编织复合材料细观结构分析

阐述了异型截面三维编织物编织的基本原理,以"口"字型截面为例,系统地分析了携纱器在机器底盘上的运动规律以及纱线在面内和空间的交织运动规律.采用控制体积单元法建立了异型截面三维编织复合材料中除普通方型三维编织复合材料所具有的内胞、面胞和角胞外,在矩形与矩形相连区域的相连内部单胞、相连表面单胞和相连角单胞模型.这些单胞模型的表面与预制件的表面平行,有利于今后的力学性能分析.此外,在假设纱线具有椭圆形横截面的基础上,推导了编织工艺参数之间的数学关系,为进一步分析异型截面三维编织复合材料的力学性能奠定了基础.      

激光快速熔凝Al2O3/YAG共晶陶瓷的制备与组织

采用激光快速熔凝技术制备Al₂O₃/YAG共晶自生复合陶瓷, 研究Al₂O₃/YAG共晶陶瓷在高能激光束作用下,不同扫描速率(0.01~2.0mm/s)、超高温度梯度下的凝固组织特征及其生长机制,探索激光熔凝过程控制参数与凝固组织的关系.研究结果表明:激光熔凝Al₂O₃/YAG共晶陶瓷由无规则连续分布的Al₂O₃相和YAG相两相组成,没有晶界和其他相,Al₂O₃相的体积分数为(45.0±2.0)%,两相耦合生长,交错分布,是典型的快速凝固层片状非规则共晶组织;共晶层间距细密, 并随激光扫描速度的增大而减小,扫描速度为0.02mm/s 时,共晶间距约为1~2μm,扫描速度为2.0mm/s时,共晶间距仅为0.5μm左右;综合热分析表明,Al₂O₃/YAG共晶熔点为2096K,与相图吻合.     

基于数据融合树的C3I信息融合系统体系结构设计

 在分析了基于范例的体系结构-数据融合树的基本概念及其不足之处的基础上,提出了基于数据融合树的信息融合系统体系结构设计方法,论述了该方法的原理,并应用该方法进行了C³I信息融合系统的体系结构设计,包括数据融合树的设计、融合节点体系结构设计、处理系统的体系结构设计和并行处理结构设计。     

Preparation and Microstructure of Cu/Ti_3SiC_2 Nanocomposite

Mixed micron-sized Cu/Ti3SiC2 (vol5%) powder was mechanically milled using agate balls and zirconia balls separately. Then followed an examination of it with the FEI-SEM. The experimental results show that, distributed homogenously in Cu matrix, the Ti3SiC2 particles have a size of about 30-50 nm after milled with agate balls for 8 h, while it remains approximately unchanged after milled with zirconia balls. The microstructure of the mixture at different ball-milling stages was also studied. Bulks of Cu/Ti3SiC2 nano-composite were fabricated by hot pressing nano-sized Cu/Ti3SiC2 powder at the temperature of 1 073 K under 100 MPa. Then came an investigation of the effects of the particle size and agglomerate state of Ti3SiC2 as well as the microstructure of Cu/Ti3SiC2 nano-composite. It was found that the nano-sized Ti3SiC2 particles distribute evenly in copper.     

Microstructure and Mechanical Properties of Cross-rolled Ti50Ni47Fe3 Shape Memory Alloy

The microstructures, the phase transformation characteristics, and the mechanical properties of the Ti50Ni47Fe3 alloy in as-forged and as-cross-rolled states were investigated. It is found that, after cross-rolling, the phase transformation temperature （Ms） of the alloy decreases drastically and the grains get refined. Moreover, its yield strength and fracture strength after cross-rolling hit 540 MPa and 687 MPa respectively, up by about 200 MPa over those in as-forged state.     

具有操纵面间隙非线性二维翼段的气动弹性分析

 基于Theodorsen 理论和Wagner 函数,提出了不可压缩流作用下三自由度二维翼段任意运动非定常气动力表达式。对操纵面自由度具有的间隙非线性,建立了二维翼段气动弹性系统无量纲分段线性运动方程。数值仿真预示了系统极限环振动的相轨迹、无量纲振动幅值和频率,表明操纵面铰链处存在的间隙非线性将导致整个系统的极限环振动;随着来流速度的增加,系统极限环振动的幅值和频率都存在跳跃现象。