CU-1型钇基重稀土对Be-Cu合金性能影响的研究

研究了CU-1型钇基重稀土对Be-Cu合金性能的影响。结果表明:Be-Cu合金经过微量CU-1型稀土的微合金化处理后,其显微硬度、耐磨性和耐腐蚀性均有不同程度的提高,热膨胀系数有所下降;随着稀土加入量的增加,Be-Cu合金的显微硬度逐渐提高,磨损量和平均腐蚀速率逐渐降低,热膨胀系数先减小后增大。     

A thermal activation based constitutive model for the dynamic deformation of AA5083 processed by large-scale equal-channel angular pressing

Aluminum alloy 5083 (AA5083) processed by large-scale Equal-channel angular pressing (ECAP) is an excellent engineering material with great prospects for industrial applications. An accurate assessment of the underlying constitutive relationships with easily determined material constants is critical for the predictive design and informed processing of such structural materials. To develop such a design framework, uniaxial dynamic compressive tests over a wide range of temperatures (293–573 K) were carried out for an ECAP-processed AA5083 alloy. Additionally, the microstructure before and after dynamic loading was characterized by SEM and TEM. Based on the experimental results, a new dynamic constitutive model, based on thermal activation theory, was established to describe the plastic flow behavior of the AA5083 alloy that incorporates the effects of plastic strain, temperature, and strain rate. The input parameters of the new model were determined using a particle swarm optimization (PSO) method. The model predictions show excellent agreement with experimental results, which suggests that the current predictive constitutive model is highly effective in reproducing the dynamic deformation behavior of the large-scale ECAP-processed AA5083.     

Effect of blank quenching on shear spinning forming precision of 2219 aluminum alloy complex thin-walled components

The quenching-spinning (Q-S) process, i.e., shear spinning after blank quenching, has been increasingly utilized to form 2219 aluminum alloy complex thin-walled components. However, the changes in material property, shape and stress of the blanks after quenching will affect the spinning forming precision. In this study, the rules and mechanisms of these effects are investigated based on a combined finite element (FE) model including blank quenching and component spinning process. The results indicate that the increase of material strength and the existence of distortion of the quenched blank lead to a notable increase in the non-uniformity of the circumferential compressive stress in the spinning area and the increase of the flange swing height during spinning. These changes result in an increase in the wall thickness and component-mandrel gap of the components. The quenching residual stress has little effect on wall thickness and roundness but can noticeably reduce the component-mandrel gap. This is because that the existence of quenching residual stress of the blank can lead to the decrease of the maximum circumferential compressive stress of the workpiece in spinning and an obvious drop in the maximum compressive stress after reaching the stress peak. Quenching distortion is the main factor affecting the roundness. Moreover, the optimized installation way of the blank for spinning is obtained.     

Microstructure control techniques in primary hot working of titanium alloy bars:A review

How to control the microstructure of titanium alloy bars is important to fabricating high-performance aerial forgings. This paper gives a thorough survey of the manufacturing meth-ods and microstructure control techniques for titanium alloy bars. It summarizes the effects of pro-cessing parameters on the mechanisms and laws of microstructure evolution during b working and (a+b) working, including the kinetics and grains size of dynamic recrystallization (DRX) during b deformation and the kinetics and grains size of spheroidization during (a+b) deformation. The trends in microstructure control techniques are presented for fabricating titanium alloy bars with high efficiency, low cost, and high quality by means of b/(a+b) working, and the puzzles and chal-lenges in the future are also pointed out.     

航空发动机钛火试验技术研究新进展

钛火是现代航空发动机典型的灾难性故障.针对高推重比发动机对钛火试验技术的迫切需求,系统开展了摩擦氧浓度法钛合金燃烧技术及理论研究,建立了阻燃性能评价方法和摩擦着火模型,阐明了阻燃钛合金的阻燃机理.在总结近期研究进展基础上,从钛火的演化规律、机理和防控三个层次,提出钛火试验技术及应用研究的思路和方向,即接近发动机气流环境的阻燃性能综合评价、发动机气流环境的阻燃性能预测模型和阻燃技术的试验验证.未来实现发动机钛火防控体系的科学构建,助推压气机“全钛化”和发动机推重比不断提高.     

变极性等离子弧焊设备及其铝合金焊接工艺研究

介绍了国产变极性等离子弧焊（VPPAW）设备的组成、变极性电源主电路的工作原理。以及微机控制和焊炬等关键技术。用该设备对不同厚度的高强度可热处理强化铝合金试样、贮箱缩比及1：1试验件进行了VPPAW，并分析了接头形式、起弧与收弧、焊接工艺参数确定、常见缺陷、焊接组织及其力学性能。焊接试验结果表明，用VPPAW设备焊接的铝舍金厚度可达14mm，与交流钨极惰性气体保护焊（TIG）相比，其焊缝质量佳，接头性能优。     

氧化铝短纤维增强ZL109铝合金复合材料的组织与性能的研究

本文以氧化铝短纤维为增强体,用挤压铸造技术制备了氧化铝/铝合金复合材料。研究了复合材料的组织与性能。研究结果表明,纤维在复合材料中分布均匀,与基体结合良好;氧化铝纤维有利于铝硅合金中硅相的非均质成核;和基体合金相比,复合材料具有更高的常温及高温强度、硬度和良好的耐磨性能,是一种性能优异的金属基复合材料。     

铝合金薄板K_c测试新方法的探讨

通过用圆(或椭圆)孔试件测量金属薄板平面应力断裂韧性Kc的方法,与通过用中心穿透裂纹试件Kc的标准方法相比较之后,将Whitney和Nuismer用于复合层压板中的点应力破坏准则,推广到铝合金薄板Kc的测量。 在理论和实验分析的基础上,拟合出与实验结果相一致的经验公式。     

非晶态镍磷合金电沉积的研究

研究了亚磷酸—镍盐型电解液中主要工艺因素对电沉积非晶态镍磷合金的影响。结果表明,亚磷酸与氯化镍浓度比的影响最明显,该比值小于1:3时,难于形成非晶态镀层。随该比值增加,电沉积速度降低而镀层含磷量增大。镀液pH值和阴极电流密度增大时,镀层含磷量降低,不利于非晶结构的形成。从磷的阴极析出机理及其与析氢反应的相关性讨论了上述实验结果。