双级波瓣引射混合器的引射性能

采用实验和数值方法对双级波瓣引射混合器的引射性能进行研究,重点研究混合管在两种不同进口方式下的引射混合器气动特征差异,并初步分析混合管面积比和长径比对双级波瓣引射混合器引射性能的影响.结果表明:混合管进口方式对引射能力有非常重要的影响,在研究的结构参数条件下,对于受限式进口,单级波瓣引射混合器的引射能力要强于双级波瓣引射混合器约10%;而对于敞开式进口,其引射能力要优于受限式进口最大约35%,此时双级波瓣引射混合器的引射能力要略好于单级波瓣引射混合器.在较大的混合管面积比或较小的长径比下,敞开式进口下双级波瓣引射混合器较受限式进口表现尤为优越.      

基于FA-NSGA分扭传动系统的均载和轻量化优化设计

以提高均载性能和轻量化为目标对某分扭传动系统进行了多目标优化设计.建立了分扭传动的非线性动力学模型,通过计算不同输入功率和输入转速下的均载系数,衡量分扭传动系统均载性能.以分扭传动系统参数为设计变量,考虑多工况条件,建立了以均载系数和质量最小为目标函数的多目标优化模型.为了提高计算效率,提出了具有适应值预测机制的非支配排序遗传算法（FA-NSGA）.利用3个基准函数对FA-NSGA进行收敛性和有效性的测试.结果表明:FA-NSGA对于3个测试函数均能获得满意的最优解,并且都能减少60%以上的真实适应值计算次数.采用FA-NSGA对实例进行优化求解,在得到的Pareto最优解中选取了一组满意的设计参数,该设计结果与参照方案相比均载系数降低了0.05,分扭传动系统质量减少了3.57kg.      

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.     

Dynamic analysis of C/C composite finger seal

A seal device as an important component of aeroengines has decisive influence on per- formance, reliability, and working life of aeroengines. With the development of aeroengines, demands on the performance characteristics of seal devices are made strictly. Finger seal as a novel kind of sealing device, recently attracts more and more attentions in academic circles and engineer- ing fields at home and abroad. Research on finger seals has been extensively developed, especially on leakage and wear performances under dynamic conditions. However, it is a pity that the work on finger seals has been limited with a single approach that is improving the performance by structural optimization; in addition, the technology of dynamic analysis on finger seals is weak. Aiming at the problems mentioned above, a distributed mass equivalent dynamic model of finger seals considering the coupling effect of overlaid laminates is established in the present paper, the dynamic perfor- mance of 2.5 dimension C/C composite finger seal is analyzed with the model, and then the effects of fiber bundle density and fiber bundle preparation direction on finger seal＇s dynamic performance are discussed, as well as compared with those of Co-based alloy finger seal. The current work is about dynamic analysis of finger seals and application of C/C composite in this paper may have much academic significance and many engineering values for improving research level of finger seal dynamics and exploring feasibility of C/C composite being used for finger seals.     

基于技术参数评估的涡扇发动机总体性能设计分析

为了充分掌握各代涡扇发动机技术参数水平及其发展趋势,统计包括现役型号在内的15台2～4代涡扇发动机的总体性能参数、循环参数和部件参数,采用考虑涡轮冷却的总体性能计算和重量预测相结合的发动机技术参数综合评估模型并利用计算程序绘制趋势曲线,评估技术参数的发展趋势,结果表明技术参数逐年改善的趋势是比较稳定的,并用曲线趋势外推法取得下一代关键参数的定量数据。在此基础上探索下一代高推重比涡扇发动机可能的总体性能方案,为下一代先进涡扇发动机的预研和设计提供参考。     

基于贝叶斯因子和二阶概率方法的圣地亚热传导模型确认挑战问题

针对美国圣地亚国家实验室为促进模型确认方法的发展所提出的热传导挑战问题,根据现代模型确认思想总结了该挑战问题解答中应包含的核心内容。在确认度量环节采用贝叶斯因子考察了实验数据是否支持所给模型,在此基础上通过二阶概率方法得到了模型预测的分布,以此计算出模型预测结论的置信度。该过程中考虑了模型参数的随机不确定性和认知不确定性,最后通过灵敏度分析辨识了模型参数的不确定性对模型预测的影响。研究表明该挑战问题中的实验数据支持所给模型,模型预测受导热系数的不确定性影响最大,模型预测材料在调控条件下的失效概率不满足调控要求,该结论的置信度为99.97%。     

多尾鳍仿生航行器推进性能的三维数值研究

采用格子波尔兹曼方法及浸没边界法,发展了一套适用于自由游动的三维数值研究程序。进而以多尾鳍推进仿生航行器为原型,讨论了尾鳍数目、形状、材料刚度等构型参数及振幅、频率等尾鳍摆动参数对推进性能的影响。结果表明对称布置、反对称摆动的双尾鳍能够明显消除侧向力而避免航行器主体的横向晃动,且推力大于两个单独尾鳍的简单加和;在中等Reynolds数下,具有波动性质的柔性尾鳍不论是推进速度还是推进效率均优于刚性尾鳍;当尾鳍单纯摆动推进时,具有完整鳍面的半椭圆形尾鳍的推进性能优于后部有缺口的深叉形尾鳍。     

军用直升机雷达隐身性能仿真与评估

采用高频方法计算了某型通用直升机及其隐身改型的RCS数据,基于现有雷达隐身性能计算方法和直升机低空飞行特点,对直升机在单部雷达和雷达组网两种情况下的雷达隐身性能进行仿真分析,给出了单部雷达和雷达组网发现目标的判定准则,分析了直升机可探测范围曲线、平均综合检测概率和暴露时间等隐身指标。通过仿真分析,评估了不同飞行高度下RCS减缩与直升机隐身性能的定量关系,为直升机的隐身设计提供了参考依据。     

高超声速二元进气道前体曲线激波逆向设计

为实现高超声速二元进气道前体激波的压缩能力、压缩效率、流量捕获特性和结构长度可控,提出了平面曲线激波逆向设计方法。采用B-Spline曲线控制激波形状。利用有旋特征线法,求解激波的影响域及决定激波的壁面。设计了一凹激波,并对波后流场进行CFD无黏数值模拟,CFD结果和设计结果一致,验证了设计方法的可行性。此外,还设计了直激波、凹激波和凸激波3种激波,并对其在设计点和非设计点处的性能开展了数值研究。在设计点处,分析了激波的压缩比、激波的总压恢复系数、激波压缩区的压升、激波压缩区出口马赫数和流动角随激波控制角的变化规律。在非设计点处,分析了激波压缩区的流量系数和总压恢复系数随攻角和马赫数的变化规律。     

基于干扰观测器的高超声速飞行器预测控制器设计

针对具有强耦合特性与模型不确定性特点的高超声飞行器控制问题,提出一种新型的姿态预测控制器设计方法。引入参考模型,建立了飞行器姿态预测控制模型。基于此,利用预测理论设计了飞行器的预测控制器,同时设计了干扰观测器实时观测外界未知干扰来进行补偿控制,从而实现滚动优化的目的;基于干扰观测值与真值的误差,利用Lyapunov稳定性理论,确定了控制精度与预测步长大小的关系;最后,在参数标称与拉偏的情形下进行了高超声速飞行器姿态控制系统仿真,仿真结果表明,干扰观测器能快速跟踪干扰,并且所设计的预测步长可以满足飞行器高精度的控制要求。