A practical nonlinear robust control approach of electro-hydraulic load simulator

This paper studies a nonlinear robust control algorithm of the electro-hydraulic load simulator （EHLS）. The tracking performance of the EHLS is mainly limited by the actuator＇s motion disturbance, flow nonlinearity, and friction, etc. The developed controller is developed based on the nonlinear motion loading model. The problems of the actuator＇s disturbance and flow nonlinearity are considered. To address the friction problem, the friction model of the loading motor is identified experimentally. The friction disturbance is compensated using the obtained friction model. Therefore, this paper considers the main three factors comprehensively. The developed algorithm is easy to apply since the controller can be obtained just with one step back-stepping design. The stability of the developed algorithm is proven via Lyapunov analysis. Both co-simulation and experiments are performed to verify the effectiveness of this method.     

Flutter analysis of an airfoil with nonlinear damping using equivalent linearization

The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

基于损伤型本构高过载下装药强度数值仿真方法研究

为了准确反映改性双基推进剂装药在高过载发射条件下的破坏情况,采用基于含累积损伤的非线性粘弹性本构模型,利用ABAQUS有限元软件二次开发的UMAT子程序,对某型火箭弹在过载发射情况下的装药进行了数值研究,分析了装药在高过载条件下的变形行为和力学特性。结果显示,在最大加速度为1.39×104g的高过载下,最大应力发生在装药底部内孔处;装药径向尺寸变化很小,可以忽略发动机壳体对装药外表面的约束而将其视为自由表面。比较了最大应力强度准则和累积损伤准则对装药在加速度冲击和压强端面冲击载荷下破坏的判断,两种判据的结果都表明,装药在高过载冲击载荷下没有被破坏。     

基于试验的电动舵机模型辨识

目前电动舵机模型的建立基本上是基于理论的数学推导,所建立的舵机模型与实际舵机模型存在一定的误差。针对此问题,提出一种基于试验实测数据建立舵机模型的方法,搭建自动数据采集试验平台,采用组合窗法对实测数据进行频域转换,得到舵机的频率响应函数并采用非线性最小二乘法辨识舵机模型。对辨识得到的数学仿真结果与实际舵机响应比较,在频域,整个频段内幅频特性最大绝对误差1.9 dB;在时域,仿真模型跟踪实际舵机角度的最大误差1.5°,延迟时间10 ms。结果表明,基于试验数据建立的舵机仿真模型能很好地模拟实际舵机。     

转子-支承耦合结构的模型修正研究

在转子-支承耦合结构的动力学分析过程中,结构模态参数计算结果与实验测试结果往往存在较大差异。针对此问题,应用优化算法对结构动力学模型进行修正,使计算模型能更准确地反映结构特性。建立由梁单元、盘单元、弹性支承单元组成的结构动力学有限元模型;选择优化目标函数、设计参数,并对各参数进行灵敏度分析。应用粒子群算法对选取的设计参数进行优化,得到最优模型。利用转子-滚动轴承实验器进行验证,结果表明,方法能够有效地实现转子-支承耦合结构的动力学模型修正,修正后模型更接近实际结构。     

基于转子初始不平衡量控制的整机振动排故方法

针对某型航空发动机试车低压振动超限问题,结合发动机的结构特点,进行了故障分析。通过改进转子的平衡工艺,提出了控制转子初始不平衡量从而抑制发动机临界转速振动大的排故方法,再次试车时发现振动水平良好。结果表明排故方法有效,对今后发动机装配和整机振动排故具有重要的参考价值。     

串联式鼠笼弹性支承高周疲劳性能试验

为评估弹性支承高周疲劳性能,根据某航空发动机串联式鼠笼弹性支承系统结构,设计了一套弹性支座疲劳试验件和试验参数测试方法,对弹性支座的高周疲劳性能进行试验研究。经试验验证,所设计的试验方案可以更好地模拟发动机工作状态下弹性支座的受力状态,试验过程中的载荷调节和控制更直接、便捷,为发动机弹性支承的疲劳寿命设计提供了方法支持。     

倒立摆系统的建模与积分滑模控制

在研究了倒立摆系统动力学模型的基础上,提出了一种积分滑模变结构的控制方法。通过设计积分性质的非线性滑模面,可以减少系统静差,提高控制精度,系统鲁棒性能获得了很好的保存。仿真证明,该方法能够在较短时间内实现系统的稳定,提高系统的控制精度,使倒立摆系统具有更高的稳定性和鲁棒性。     

RR公司3转子民用发动机技术发展思路

为了探寻RR公司在民用航空发动机领域中的技术和产品发展思路,对该公司3转子民用发动机产品的发展历程和市场情况以及发展的外部条件进行了简要回顾分析。介绍了RR公司3转子发动机的总体布局方案,并通过对波音787客机所使用的典型3转子发动机与双转子发动机的对比,分析了3转子布局技术特点。归纳总结出RR公司3转子民用发动机的技术发展思路的特点:大胆尝试、紧扣市场、低压部件与核心机协调发展和应用缩放技术。