单目标跟踪技术发展研究

随着机动目标定位与跟踪技术广泛应用于军事和民用领域，研究更为快速、准确的跟踪算法具有十分重要的意义。目标运动模型、跟踪算法和跟踪模型结构是机动目标跟踪技术的三项主要研究内容，文章介绍了这三项技术的研究进展及发展方向。目前，对各种经典模型的组合和改进是目标运动模型的主要研究方向，通过分析并比较工程中常用的卡尔曼滤波、扩展卡尔曼滤波、无迹卡尔曼滤波和粒子滤波的优缺点，探究了它们的不同适用场合及进一步研究方向。详细分析了三代多模型跟踪算法的原理和适用场合，这对研究更为先进的单目标跟踪技术，进一步提高跟踪精度和整体性能，具有一定的参考价值。此外，文章还提出了机动目标跟踪算法的几个发展趋势：将变结构多模型算法与目标实际运动场景结合起来，广泛应用于工程实践中；探索无需依赖于基础模型集合的模型机自适应变化方法；考虑将智能控制理论与变结构多模型跟踪算法互相结合。     

含有不平衡飞轮的卫星精确动力学模型研究

针对含不平衡飞轮的卫星动力学模型,给出了不平衡飞轮的转动惯量矩阵。用多刚体建模方法,建立了综合的完整姿态动力学分析模型,提出了质心位置的计算方法。通过飞轮系统的完整精确模型,将飞轮扰动对三轴姿态稳定卫星的影响反映至滚转一俯仰一偏航三轴姿态。Matlab／Simulink环境中仿真验证了该系统角动量为常值。分析了不平衡飞轮对卫星姿态的影响,并解释了模型的应用。研究表明飞轮扰动影响不可忽略,精确的动力学模型对未来航天器的应用有重要意义。     

导引头量测故障下的增量式三维制导律设计

考虑导引头量测故障下拦截机动目标的末制导问题,以提高制导系统的鲁棒性、降低制导增益、减小系统残差、避免视线角速率剧烈振荡/发散为目的,基于增量式控制方法设计了一种具有鲁棒增强特性的三维末制导律。首先,将末制导问题转化为零化视线角速率的控制问题。其次,通过弹目相对距离及视线角速率定义辅助变量,给出传统的滑模制导律作为设计参考。然后,基于增量式非线性动态逆滑模控制方法,充分挖掘视线角加速度估计信息及上一采样时刻的制导指令,得到增量式三维鲁棒制导律。最后,在目标机动及导引头量测故障下,分析并比较了两种制导律所产生的系统残差。理论分析及多工况仿真结果表明,增量式制导律不仅对目标机动及大范围失效的导引头量测故障具有强鲁棒性,而且所需制导增益也较小,同时避免了末端视线角速率严重发散的问题     

非均匀入口与化学非平衡效应对尾喷管性能的影响研究

基于煤油燃料超燃冲压发动机尾喷管,对均匀入口和非均匀入口、冻结流动模型和化学非平衡模型下的尾喷管内流动进行数值模拟,采用两方程RNG k-ε湍流模型对三维NS方程组进行求解,获得非均匀入口与化学非平衡效应对尾喷管性能的影响。计算结果表明,尾喷管内流动非均匀性由尾喷管非对称膨胀和燃烧室出口非均匀等因素构成,尾喷管入口流动参数非均匀分布对尾喷管推力、升力及俯仰力矩均有影响,算例中非均匀入口使得尾喷管净推力相对于均匀入口增加了1.2%左右;尾喷管性能受化学非平衡效应的影响,非平衡流动模型下的其净推力计算结果相对于冻结流动模型增加3%~4%。     

A practical nonlinear robust control approach of electro-hydraulic load simulator

This paper studies a nonlinear robust control algorithm of the electro-hydraulic load simulator （EHLS）. The tracking performance of the EHLS is mainly limited by the actuator＇s motion disturbance, flow nonlinearity, and friction, etc. The developed controller is developed based on the nonlinear motion loading model. The problems of the actuator＇s disturbance and flow nonlinearity are considered. To address the friction problem, the friction model of the loading motor is identified experimentally. The friction disturbance is compensated using the obtained friction model. Therefore, this paper considers the main three factors comprehensively. The developed algorithm is easy to apply since the controller can be obtained just with one step back-stepping design. The stability of the developed algorithm is proven via Lyapunov analysis. Both co-simulation and experiments are performed to verify the effectiveness of this method.     

Flutter analysis of an airfoil with nonlinear damping using equivalent linearization

The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

基于无网格算法的化学非平衡流数值模拟

为了验证AUSMPW+格式在无网格算法的精度等以及无网格算法能否用于复杂化学非平衡流数值模拟中,首先将AUSMPW+格式推广到无网格算法中,给出了AUSMPW+在无网格算法中的具体形式。其次,将无网格算法应用于带化学反应的多组分气体Euler方程的求解,给出无网格条件下求解化学非平衡流的具体过程。最后,对NACA0012跨声速绕流场、高超声速弹丸绕流场、氢气/氧气诱导燃烧流场、球锥高超声速绕流场、楔体斜爆轰流场进行了数值模拟。数值模拟结果与相关文献计算结果和实验结果吻合较好,表明了AUSMPW+格式在无网格算法中表现较高精度。同时,采用无网格算法能较好地模拟复杂化学非平衡流场,正确分辨复杂的物理现象,为化学非平衡流数值模拟提供一种新的算法,拓宽了无网格算法的应用范围。     

基于损伤型本构高过载下装药强度数值仿真方法研究

为了准确反映改性双基推进剂装药在高过载发射条件下的破坏情况,采用基于含累积损伤的非线性粘弹性本构模型,利用ABAQUS有限元软件二次开发的UMAT子程序,对某型火箭弹在过载发射情况下的装药进行了数值研究,分析了装药在高过载条件下的变形行为和力学特性。结果显示,在最大加速度为1.39×104g的高过载下,最大应力发生在装药底部内孔处;装药径向尺寸变化很小,可以忽略发动机壳体对装药外表面的约束而将其视为自由表面。比较了最大应力强度准则和累积损伤准则对装药在加速度冲击和压强端面冲击载荷下破坏的判断,两种判据的结果都表明,装药在高过载冲击载荷下没有被破坏。     

基于试验的电动舵机模型辨识

目前电动舵机模型的建立基本上是基于理论的数学推导,所建立的舵机模型与实际舵机模型存在一定的误差。针对此问题,提出一种基于试验实测数据建立舵机模型的方法,搭建自动数据采集试验平台,采用组合窗法对实测数据进行频域转换,得到舵机的频率响应函数并采用非线性最小二乘法辨识舵机模型。对辨识得到的数学仿真结果与实际舵机响应比较,在频域,整个频段内幅频特性最大绝对误差1.9 dB;在时域,仿真模型跟踪实际舵机角度的最大误差1.5°,延迟时间10 ms。结果表明,基于试验数据建立的舵机仿真模型能很好地模拟实际舵机。