某型蒸发式稳定器气动及燃烧特性研究

为解决亚燃冲压发动机在高速低温来流条件下的可靠点火、火焰稳定和高效燃烧问题,对某型蒸发式火焰稳定器分别进行了冷态流场和燃烧流场的数值研究,并与常规V型火焰稳定器进行了对比分析。研究结果表明:在给定范围内,蒸发式稳定器随来流速度的增大,总压恢复系数和停留时间明显减小,回流区长度、回流率和燃烧效率变化不大;与相同槽宽的常规V型火焰稳定器相比,回流率明显减小,总压恢复系数、回流区长度和停留时间略有减小。蒸发式稳定器后部形成明显的回流区,且基本上不受外部主流流动的干扰,通过单独控制稳定器局部供油,可以使稳定器在最佳油气比下工作,有利于在高速来流条件下可靠工作。     

220GHz返波振荡器高频特性及互作用研究

文章对220GHz折叠波导慢波电路的返波传输特性进行了研究。介绍了返波振荡器的工作原理,结合模拟仿真和理论分析,针对220GHz的返波振荡器,研究各个参数对冷特性的影响。对220GHz返波振荡器的高频结构进行了初步设计,给出了结构参数以及相应的模拟结果。结果表明在不考虑损耗的情况下,设计的结构可以在中心频率220GHz处获得约为0．5W的功率,可调谐范围是30GHz,调谐电压范围为5．5kV-12kV。     

一种大面积比喷管的分段式设计与数值分析

为了满足大推力上面级发动机大面积比喷管的设计需求,采用了排放冷却前段和单壁辐射冷却尾段的分段式设计方案。在排放冷却前段传热计算的基础上,通过对内流场进行数值模拟,重点研究了单壁尾段在引入上游排放冷却气氢情况下的冷却特性和喷管效率。结果表明:对于大面积比喷管,采用带二次流的单壁金属喷管延伸段是现实可行的,有望达到较好的冷却保护效果并提高喷管效率。     

变形飞行器建模及控制方法研究综述

针对变形飞行器的发展现状、气动建模、动力学建模以及控制方法研究进行了综述。首先阐述了变形飞行器的定义及变形需求,再从四个方面梳理了变形飞行器的技术优势。针对不同的机翼变形方式,对飞行器各种变形技术的特点及发展现状进行了详细的分析与总结;将变形飞行器与固定外形飞行器的气动机理进行了对比分析,并对变形飞行器的动力学建模方法进行了梳理,总结了各种方法的特点;结合变形飞行器自身特性分析了飞行控制的特点及难点,并详细阐述了各类变形飞行器的控制研究进展。最后总结分析了变形飞行器的发展趋势：深化基础理论与技术研究,从材料、结构及控制等领域全方面朝着智能化方向发展,最终实现变形飞行器的工程化、自主化、智能化应用。     

25tf膨胀循环氢氧发动机研制进展

25 tf膨胀循环氢氧发动机是针对我国重型运载火箭三级主动力需求研制的液体火箭发动机,也可应用于未来其他航天器的上面级。该发动机采用闭式膨胀循环方式,具备高可靠、高比冲、大范围变推力以及多次点火等能力。发动机已通过推力室挤压热试验、氢涡轮泵介质试验等子系统试验验证了各项关键技术及组合件设计方案,发动机的整机方案实现已不...     

姿轨控发动机开机充填和关机传热特性

以双组元姿轨控液体火箭发动机为研究对象,为提高其响应速度和安全可靠性,通过实验和仿真对其开机充填和关机传热特性进行了研究。开展了透明喷注器试验件瞬态流动过程的实验研究,采用高速相机进行液流拍摄,对喷注器试验件瞬态流动过程进行仿真计算,并与实验结果进行对比,验证了流体体积模型计算的合理性。仿真结果表明地面状态各安装方向下...     

Flutter analysis of an airfoil with nonlinear damping using equivalent linearization

The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

Investigations into sensing characteristics of circular thin-plate electrostatic sensors for gas path monitoring

Circular thin-plate electrostatic sensors are promising in gas path monitoring due to their advantages of non-intrusiveness and easy installation. The spatial sensitivity and filtering effect are two important performance parameters. In this paper, an analytically mathematical model of induced charge on a circular thin-plate electrode is first derived. Then the spatial sensitivity and filtering effect of the circular electrostatic sensor are investigated by numerical calculations. Finally,experimental studies are performed to testify the theoretical results. Both theoretical and experimental results demonstrate that circular thin-plate electrostatic sensors act as a low-pass filter in the spatial frequency domain, and both the spatial filtering effect and the temporal frequency response characteristics depend strongly on the spatial position and velocity of the charged particle. These conclusions can provide guidelines for the optimal design of circular thin-plate electrostatic sensors.     

三维内转式进气道对双旁进气飞行器力矩特性的影响分析

为了研究三维内转式进气道对飞行器力矩特性的影响规律,对一系列设计状态为Ma=6.5的内转式进气道展开力矩特性研究。对不同布局形式,进气形式以及基准流场中心体的内转式进气道对飞行器力矩特性的影响展开分析研究。研究结果表明,对于内转式进气道而言,有连接板的水滴型进气道双侧布局力矩特性较优,且容易满足飞行器总体需求;布局形式对进气道的力矩特性影响最显著,进气形式对侧滑力矩的影响比基准流场中心体影响更明显,而抬头力矩和滚转力矩受基准流场中心体影响更加突出;中心体在0~0.1Rs(Rs为基准流场入口半径)变化时,抬头力矩变化不大,而在0.1~0.2Rs抬头力矩变化明显。