内埋式弹舱舱门气动载荷计算分析研究

采用中心有限体积法进行空间离散和四步Runge-Kutta显式推进方法进行时间推进数值求解了非定常欧拉方程;采用Delaunay方法生成内埋式弹舱舱盖打开时的非结构网格.数值模拟了内埋式轰炸机弹舱单开舱门在分别打开8°和45°时的复杂流场.通过对上述复杂流场的分析,发现作用于舱门的气动载荷具有使其趋向于关闭的特性,且有随打开角度的增大而减小的趋势.     

基于MSC/PATRAN的飞机结构强度静力试验数据实时跟踪与处理系统开发

 在Windows环境下,以MSC/PATRAN为平台,利用平台提供的二次开发语言PCL(Patran Command Language),并结合C++语言,通过客户化、增设特定的命令和窗体等技术开发了飞机结构强度静力试验数据实时跟踪与处理系统TestDTAS（Test Data Tracking, Analyzing and Processing System）。在结构试验进行中,TestDTAS可以实时地监测结构试验件中应力和位移的变化情况,并与理论分析结果进行对比,而在试验结束后,TestDTAS可以进行试验数据回放和分析,从而将试验与理论分析有机的结合在一起,对结构静力试验和结构设计有很高的实用价值。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

空间质子直接和非直接电离引发单粒子效应的地面等效评估试验方法

以40 nm和65 nm CMOS工艺SRAM为样品,进行质子辐照单粒子效应试验研究,以建立空间质子引起单粒子效应的地面等效评估试验方法.分别进行低能质子直接电离、高能质子核反应和重离子直接电离引起的单粒子翻转试验;根据获得的试验数据,分析讨论给出空间质子引起半导体器件单粒子效应的地面等效评估试验方法:对低能质子直接电...     

航天器虚拟热试验平台的软件架构及其应用

针对我国目前航天领域型号试验任务重、成本高的特点,文章提出搭建航天器虚拟热试验平台以缩短型号研制周期、减少研发成本。虚拟热试验平台结构拟由5个单独模块组成:试验系统描述及边界条件输入模块,虚拟试验运算模块,模型修正模块,结果报表及经济性分析模块和虚拟试验数据库。另外提出了虚拟热试验平台在航天器真空热试验中的应用。     

利用红外加热笼进行低热流模拟的设计方法研究

在航天器热平衡试验中,散热面区域的低热流密度要求往往难以实现。在以往的试验中,考虑到加热笼覆盖系数对热流密度均匀性的影响,通常选用红外灯阵作为主要的外热流模拟装置。但是红外灯阵体积和热容较大,形状适应性不强,对试验容器空间要求较高。文章利用仿真的手段研究了加热笼的覆盖系数对热流密度均匀性的影响,探讨了利用红外加热笼进行低热流模拟的可行性。     

包带低冲击装置冲击试验及数据分析

文章主要阐述了包带低冲击装置冲击试验的过程及采用的试验技术,并对试验数据进行了处理和分析。通过大量的试验数据,对响应量级与测量点的位置分布、响应与包带预紧力的关系、冲击响应与装药量的关系、冲击响应与起爆器的关系、冲击响应的频率分布关系以及安装方式对试验结果产生的影响作了充分的分析。结果可为研究低冲击装置提供有价值的参考。