基于线性二次型的飞控参数故障渐近调节

 研究了含有参数故障的线性系统,提出了一种基于线性二次型的控制策略。采用该渐近调节反馈控制律,可以减小系统由于容错控制算法时延所致的性能下降。针对某飞机模型进行了仿真,结果验证了所提出策略的有效性。     

英国评估海贼鸥IR导弹

MBDA英国公司目前正在对直升机发射型的海贼鸥IR导弹进行评估阶段的研究。设计该导弹的目的是满足英国皇家空军未来反舰制导武器（重型）计划的需求,用来替换原有的海贼鸥型反舰导弹。     

HTPBⅠ型裂纹粘弹性有限元分析

在简化模型的基础上，推导了复合固体推进剂中Ⅰ型拉伸裂纹的裂尖区域应力、应变与位移的关系式，并进行了粘弹性有限元方法分析。结果表明，有限元分析能获得具一定精度的结果，并与理论分析基本吻合。     

肯纳金属公司全新产品亮相CIMT 2011

伴随着在IMTS 2008上的首次发布,全世界的肯纳金属用户都热切地关注着肯纳高性能刀具产品创新的BeyondTM平台.由于更高的金属切削率和更长的刀具寿命,这些产品为广大的金属切削用户提高了30％或更多的生产效率.     

应力松弛成形模具型面构造技术

现代飞机的外形复杂,曲率半径变化不一,使得应力松弛成形模具型面构造复杂,而应力松弛引起的塑性变形现象的存在更是加大了模具型面构造技术的难度,为了使成形回弹后的整体壁板符合设计要求,需要对回弹进行有效的补偿,通常是将回弹量预先补偿到模具上,再次成形来判断模具型面的构造是否合理。本文介绍几种应力松弛成形模具型面构造方法,并分析各自的特点。     

整体叶轮电火花加工技术研究

整体叶轮因其材料难于切削、叶片型面复杂等因素,其加工一直都是机械制造业的难题。本文针对叶片的结构特点,结合复杂曲面造型理论,利用Solid-Works软件进行了整体叶轮造型研究。针对分体电极容易形成搭接台阶、叶片成形精度低的缺点,设计了适合整体叶轮加工的整体式电极,该电极具有叶片型面成形精度高、能源消耗低的优点。     

Stifness modeling and analysis of a novel 4-DOF PKM for manufacturing large components

Faster response to orientation varying is one of the outstanding abilities of a parallel kinematic machine（PKM）.It enables such a system to act as a reconfgurable module employed to machine large components effciently.The stiffness formulation and analysis are the beforehand key tasks for its parameters design.A novel PKM with four degrees of freedom（DOFs）is proposed in this paper.The topology behind it is 2PUS-2PRS parallel mechanism.Its semianalytical stiffness model is frstly obtained,where the generalized Jacobian matrix of 2PUS-2PRS is formulated with the help of the screw theory and the stiffness coeffcients of complicated components are estimated by integrating fnite element analysis and numerical ftting.Under the help of the model,it is predicted that the property of system stiffness distributes within the given workspace,which features symmetry about a certain plane and is also verifed by performing fnite element analysis of the virtual prototype.Furthermore,key parameters affecting the system stiffness are identifed through sensitivity analysis.These provide insights for further optimization design of this PKM.     

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow with vortex production——A general model

By using a special momentum approach and with the help of interchange between singularity velocity and induced flow velocity, we derive in a physical way explicit force formulas for twodimensional inviscid flow involving multiple bound and free vortices, multiple airfoils, and vortex production. These force formulas hold individually for each airfoil thus allowing for force decomposition, and the contributions to forces from singularities(such as bound and image vortices,sources, and doublets) and bodies out of an airfoil are related to their induced velocities at the locations of singularities inside this airfoil. The force contribution due to vortex production is related to the vortex production rate and the distance between each pair of vortices in production, thus frameindependent. The formulas are validated against a number of standard problems. These force formulas, which generalize the classic Kutta–Joukowski theorem(for a single bound vortex) and the recent generalized Lagally theorem(for problems without a bound vortex and vortex production) to more general cases, can be used to identify or understand the roles of outside vortices and bodies on the forces of the actual body, optimize arrangement of outside vortices and bodies for force enhancement or reduction, and derive analytical force formulas once the flow field is given or known.