A salient edges detection algorithm of multi-sensor images and its rapid calculation based on PFCM kernel clustering

Multi-sensor image matching based on salient edges has broad prospect in applications, but it is difficult to extract salient edges of real multi-sensor images with noises fast and accurately by using common algorithms. According to the analysis of the features of salient edges, a novel salient edges detection algorithm and its rapid calculation are proposed based on possibility fuzzy C-means （PFCM） kernel clustering using two-dimensional vectors composed of the values of gray and texture. PFCM clustering can overcome the shortcomings that fuzzy C-means （FCM） cluster- ing is sensitive to noises and possibility C-means （PCM） clustering tends to find identical clusters. On this basis, a method is proposed to improve real-time performance by compressing data sets based on the idea of data reduction in the field of mathematical analysis. In addition, the idea that kernel-space is linearly separable is used to enhance robustness further. Experimental results show that this method extracts salient edges for real multi-sensor images with noises more accurately than the algorithm based on force fields and the FCM algorithm; and the proposed method is on average about 56 times faster than the PFCM algorithm in real time and has better robustness.     

超声速条件下多体干扰与分离试验研究

采用根据国外公开文献设计的类CAV模型,在0．6m×0．6m 跨/超声速风洞中开展了多体干扰与分离网格测力试验研究,初步获得了典型多体飞行器分离过程中的气动特性变化规律。试验结果表明,载荷模型气动特性受分离位置变化影响非常明显。载荷模型沿轴向分离时,气动力（矩）逐步接近自由流中气动力（矩）值,载荷模型法向位置改变会引发其气动力（矩）值发生更为剧烈的变化。引发这种现象的原因有两个：一是尾迹和头激波的发展改变了不同轴向位置处载荷模型的表面流态,从而影响了其气动特性;二是母机模型底部流动具有明显的非对称膨胀特征,不同法向位置处流速大小和方向差异明显,导致载荷模型气动特性随法向位置变化更为剧烈。     

An extended chirp scaling algorithm for spaceborne sliding spotlight synthetic aperture radar imaging

A system impulse response with low sidelobes is critical in synthetic aperture radar（SAR） images because sidelobes contribute to noise and interfere with nearby scatterers. However,the conventional tricks of sidelobe suppression are unable to be exactly applied to the case of spaceborne sliding spotlight SAR due to great azimuth shifts in both time and frequency domains. In this paper, an extended chirp scaling algorithm is presented for spaceborne sliding spotlight SAR data imaging. The proposed algorithm firstly uses the spectral analysis（SPECAN） technique to avoid the azimuth spectrum folding effect and then employs the chirp scaling（CS） algorithm to achieve data focusing, i.e., the so-called two-step approach. To suppress the sidelobe level, an efficient strategy for the azimuth spectral weighting which only involves matrix multiplications and short fast Fourier transformations（FFTs） is proposed, which is a post-process executed on the focused SAR image and particularly simple to be implemented. The SAR image processed by the proposed extended CS algorithm is very precise and perfectly phase-preserving. In the end, computer simulation results verify the analysis and confirm the validity of the proposed algorithm.     

大膨胀比跨声速涡轮流动结构及损失的数值研究

为了揭示跨声速大膨胀比涡轮损失的主要特点和两种不同尾缘冷却方式对损失的影响,以典型大膨胀比跨声速涡轮和跨声速叶栅为研究对象开展了数值研究。研究发现大膨胀比跨声速涡轮的主要损失是叶型损失,占到总损失的65%左右,尾缘激波损失是叶型损失的主要来源。尾缘全劈缝冷气入射通过提高尾缘基压区基压来减少尾缘膨胀波对气流的加速程度,从而降低最高马赫数和激波损失,尾缘压力面劈缝冷气入射通过改变叶片尾缘压力面激波波系结构,使原来的一道激波变成两道或者两道以上的弱激波,从而减少激波损失。两种尾缘冷气方式都有利于降低大膨胀比跨声速涡轮激波损失,但压力面劈缝冷气入射方式效果更为明显。     

基于LBM-LES方法的多段翼型流场数值模拟

运用Lattice Boltzmann(LB)方法与Large Eddy Simulation(LES)结合的方法数值模拟研究了二维翼型绕流流场,其中,粒子速度模型采用D2Q9模型,松弛时间中对应的湍流粘性系数由Smagorinsky模型计算,网格生成方法采用无网格技术。对NACA0012翼型进行数值模拟,验证其有效性;为进一步研究其模拟复杂物体绕流的能力,以三段翼型30P30N为研究对象进行数值研究,计算出了给定攻角条件下的气动特性,并与实验值进行比较。计算结果表明,LBM-LES方法的计算结果能够与实验值一致,是一种可行、有效且较新的数值模拟方法。     

多波段拉曼-荧光激光雷达系统可用于雾霾探测

正近日,兰州大学教授黄建平带领科研团队研制出我国首个多波段拉曼-荧光激光雷达系统。该系统不仅可用于大气雾霾探测的研究及预警,还可用于卫星数据校正、气象观测等领域。"多波段拉曼-荧光激光雷达系统用高功率激光器向天空同时发射三束激光,也就是三个波段。紫外激光与大气颗粒物作用之后,就会释放出荧光,利用大口径的望远镜接收被大气反射回来的信号,共有38个波段。黄建平     

TC11钛合金微动疲劳裂纹萌生预测分析

针对航空发动机叶片与盘榫连接结构简化模型的微动失效形式,建立了基于临界平面法预测微动疲劳裂纹萌生的控制模型。该模型引入综合考虑多种微动疲劳影响因素的微动损伤参量CSE(微动综合损伤参量),建立了微动疲劳特性的分析流程,对微动疲劳裂纹的萌生方向、位置和寿命进行了估算。应用CSE控制模型,对失效的TC11钛合金微动疲劳试件的裂纹萌生进行预测,通过比较不同损伤参量的预测结果,验证了CSE预测裂纹萌生的有效性。     

Multi-h CPM遥测信号的定时频率联合估计技术

针对Multi-h CPM（Multi-h Continue Phase Modulation,多指数连续相位调制）遥测接收机的符号定时和载波频率同步问题,在分析MLSD（Maximum-likelihood Sequence Detection,最大似然序列检测）度量值是符号定时偏差和频率偏差的凸函数的基础上,提出一种基于迟/早门和升/降频门的符号定时和频率同步联合估计算法,通过似然值比较,对符号定时偏差和频率偏差进行迭代估计;并对该算法进行仿真,得到不同参数下的同步性能,给出同步参数选择建议.仿真结果表明：将该算法应用到Multi-h CPM遥测系统中,可实现低信噪比信号的快捕和高精度同步.     

波音737-800飞机起飞性能随襟翼放出量的变化特点

波音737飞机与其他民用机型的一个不同之处是前缘缝翼在起飞时可以使用开缝状态。分析了波音737-800飞机下列四个起飞性能参数与襟翼放出量的关系:场地长度限制的最大起飞重量;爬升梯度限制的最大起飞重量;障碍物限制的最大起飞重量;起飞决断速度。结果显示这四个参数在襟翼放出量为10时出现异常,原因是前缘缝翼状态发生了变化。在襟翼放出量由5增大到10的过程中,前缘缝翼由不开缝的放出状态变成开缝的完全放出状态,降低了升力系数。     

浅析运输类飞机经济舱头排旅客座椅头部损伤判据的影响因素

介绍了头部损伤判据HIC的概念、适航要求及影响运输类飞机客舱头排旅客座椅HIC的相关参数;叙述了旅客座椅头排距、头部撞击壁板的刚度、安全带织带伸长率、乘坐摩擦系数等参数的影响和重要程度;对如何设计符合HIC要求的经济舱头排旅客座椅和壁板提出了建议。