镍基单晶合金高温蠕变的θ映射模型

针对镍基单晶涡轮叶片蠕变的晶体方向性问题,运用θ映射法,在晶体滑移理论框架下,建立了能够描述镍基单晶合金各向异性蠕变的θ模型.利用文献中2种镍基单晶合金(DD3和CMSX-4)的蠕变数据,对所采用的方法进行了验证,并获得了2种材料各自对应的材料参数.理论预测值和试验数据基本吻合.结果表明:将θ映射法移植到晶体滑移理论中是可行的,能够用来模拟镍基单晶合金的各向异性蠕变行为.     

孔间距和前倾角对进出口扩张形气膜孔流量系数的影响(英文)

Discharge coefficients of 3-in-1 hole of three inclination angles and three spacing between holes are presented which described the discharge behavior of a row of holes. The inlet and outlet of the 3-in-1 hole both have a 15° lateral expansion. The flow conditions considered are mainstream turbulence intensities and density ratios of secondary flow to mainstream. The momentum flux ratios varied in the range from 1 to 4. The comparison is made of the discharge coefficients of three shaped holes to find an optimal hole with low flow loss. The results show that the discharge coefficients of 3-in- 1 hole are highest in three shaped holes and therefore this article is focused on the measurements of discharge coefficients of 3-in-1 hole for various geometries and aerodynamic parameters. The measured results of 3-in-1 hole indicate that turbulence intensities, density ratios and momentum flux ratios have weak influence on discharge coefficients for inclination angle of 20°. The high turbulence intensity yields the small discharge coefficients for inclination angle of 45° and 90°. The increased both momentum flux ratios and density ratios lead to the increased discharge coefficients for inclination angle of 45° and 90°. The increased inclination angle causes the rapidly increased discharge coefficients. There is a weak dependence of discharge coefficients on hole pitches.     

氢-氮电弧加热推力器运行参数与性能

采用氢气和氮气的摩尔比r在1.0~2.0范围的混合气体作为推进剂,实时检测电弧加热推力器运行中的弧电流、弧电压、入口压力、真空室压力、质量流量和喷口温度等工作参数,研究了比功率、r和质量流量对推力器产生的推力、比冲和推力效率的影响。实验结果表明,同时增加混合气体的质量流量和r能有效提高推力器的推力;较高的r能获得高的比冲和效率,尤其是比冲随着r的提高明显地单调上升。     

Foreign Object Damage to Fan Rotor Blades of Aeroengine Part Ⅱ： Numerical Simulation of Bird Impact

Bird impact is one of the most dangerous threats to flight safety. The consequences of bird impact can be severe and, therefore, the aircraft components have to be certified for a proven level of bird impact resistance before being put into service. The fan rotor blades of aeroengine are the components being easily impacted by birds. It is necessary to ensure that the fan rotor blades should have adequate resistance against the bird impact, to reduce the flying accidents caused by bird impacts. Using the contacting-impacting algorithm, the numerical simulation is carded out to simulate bird impact. A three-blade computational model is set up for the fan rotor blade having shrouds. The transient response curves of the points corresponding to measured points in experiments, displacements and equivalent stresses on the blades are obtained during the simulation. From the comparison of the transient response curves obtained from numerical simulation with that obtained from experiments, it can be found that the variations in measured points and the corresponding points of simulation are basically the same. The deforming process, the maximum displacements and the maximum equivalent stresses on blades are analyzed. The numerical simulation verifies and complements the experiment results.     

山特维克可乐满CoroPak08.2新品亮相CIMES 2008

山特维克可乐满是山特维克集团旗下最大的金属切削刀具公司,是全球金属切削行业的领导品牌。作为全球排名第一的金属切削业刀具制造和供应商,山特维克可乐满始终致力于提升制造业的综合实力,并为客户不断提供创新的高效率金属切削刀具和解决方案。金秋9月新鲜     

镀金属碳毡在电磁屏蔽材料中的应用

将三维网络结构的碳毡引入电磁屏蔽材料的应用,对其特有的电磁性能及网络结构作了分析,并进行了复合材料屏蔽效果计算和修正。研究表明：利用碳毡的孔洞结构和尺寸,辅之以金属镀层,能在较宽的频率内对电磁波有良好的屏蔽效率,且不需要很大的填充量。     

变攻角下孔隙射流对高负荷扩压叶栅气动性能的影响

本文对采用孔隙射流的某大折转角雎气机叶栅进行了实验研究．给出了不同攻角下叶栅流道内的静压分布、表面极限流线以及出口流场的气动参数,通过在不同叶高处开孔探讨了孔隙射流位置对大负荷扩压叶栅气动性能的影响。实验结果表明,孔隙位置对端壁静压的影响不大;开多孔方案对叶栅气动性能的影响要强于单孔方案：在设计攻角下,孔隙射流能够改善角区流动,同时降低叶片中部损失,单孔方案的最佳开孔位置位于25％相对叶高处,质量平均能量损失系数相对原形叶栅降低4．75％,开多孔方案巾能量损失相对原形叶栅最多降低5．52％：在负攻角下．孔隙射流导致叶栅性能下降,而在正攻角下,孔隙射流大幅提高叶栅性能,能量损失系数相对原形叶栅最多降低12．7％。     

管中激光加速器的推力形成过程

管中激光加速器是一种新型的激光推力器,弹射体在管道中被加速。利用光线追踪法,根据光线在网格中的传播路径信息,运用辐射输运方程,得到流场的能量源项;数值求解含能量源项的流体控制方程,对管道中等离子体流场激波的形成和演化过程进行了研究。模型能够模拟空气光学击穿、空气对激光能量的吸收、等离子体对激光的屏蔽作用和推力形成过程,通过计算得到冲量耦合系数为3.61×10-4N/MW,等离子体内能转化为流场动能的比例约为9%。     

气-气推进剂氧喷嘴出口型面对特征效率的影响

通过对气氢/气氧为推进剂的同轴剪切喷嘴进行研究,分析同轴剪切结构喷嘴出口型面变化和厚度对特征效率的影响.结果表明:氧喷嘴出口处能形成小尺度的回流区,起到火焰稳定器的作用;带扩口的氧喷嘴使氧产生径向速度,使回流区受到干扰,使推进剂特征效率较低;直口的喷嘴有利于推进剂火焰的稳定,而达到高的特征效率;而不同氧出口厚度对特征效率的影响不大.      

出流结构对涡轮叶栅端壁气膜冷却效率数值研究

通过对涡轮叶栅端壁上游不同气膜冷却结构模型进行数值模拟,得到了不同吹风比情况下,涡轮叶栅端壁的流动与换热特性.结果表明:圆柱形孔冷气射流在孔下游与主流相互作用形成一对转动方向相反的耦合涡,对涡轮叶栅端壁的气膜冷却效果不利.前向扩张孔降低了孔下游耦合涡的强度,对涡轮叶栅端壁总体气膜冷却效率要优于圆柱形孔.前向扩张缝结构增大了射流宽度,冷却了孔间端壁,对涡轮叶栅端壁总体气膜冷却效率要优于圆柱形孔和前向扩张孔.