超高强度300M钢起落架主支柱激光增材修理应用研究

某型民用飞机起落架开展疲劳试验,进行到105857起落时其主支柱组件主传力部位出现长度34mm裂纹,该支柱材料为300M钢(模锻件).手工打磨裂纹部位,清除裂纹后在零件上形成长约40mm、宽约8mm、深度30～44mm的长条形直通孔,应用A100材料,利用机器人手臂激光熔化沉积增材制造技术开展激光增材修复工艺研究,完成...     

飞机金属结构孔的可靠性维修

讨论了结构孔的预防性检查范围确定原则,分析了孔的修复性维修与改进性维修等方案确定的依据和选择原则.     

Д-30发动机ЭИ868合金扇形块的钎焊修复

针对某Д-30发动机大修对ЭИ868合金(对应于我国的牌号GH3044)扇形块的修复要求,采用真空钎焊的方法对扇形块进行了钎焊补焊。对钎焊补焊的扇形块进行超声波探伤。结果表明,钎缝内部质量满足HB7575-97一级钎焊接头的要求,表明所确定的修复工艺可实现ЭИ868合金扇形块的可靠修复。     

基于VPRS理论的航空发动机送修等级决策

应用变精度粗糙集理论研究了发动机状态信息与单元体性能参数之间的关系，提出了一种基于信息熵属性约简的航空公司发动机维修等级决策方法，从而在维修决策时能够更加客观地反映发动机实际损伤程度。最后以CF6型发动机维修等级决策规则生成为例说明了该决策方法的有效性。     

某型燃气发生器装药流胶故障修复技术研究

某型装备维护过程中发现燃气发生器装药包覆层与壳体之间原固态黑色胶粘剂由固态变化为液态流出,存在安全隐患。通过开展燃气发生器装药流胶故障的研究,分析流胶的原因及危害,制定了修复措施,消除了流胶导致的安全隐患,确保了燃气发生器装药完好性。     

Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.     

HS-X型高速水力测功机修理研究

某型高速测功机长期工作后出现效率下降、振动突增现象,无法满足发动机试车时功率吸收需要,也不能保证试车安全.通过对高速水力测功机开展逆向设计、增材修复及零备件国产化替代,自主研发高速水力测功机修理技术标准和全套工装设备,成功修复该型高速水力测功机,打破英美国家对国内的高速水力测功机修理技术封锁,也为后续国内高速水力测功机...     

航空发动机热端部件可修复性评估方法探讨

评估热端部件的可修复性是开展受损航空发动机热端部件修复工作的重要内容之一。本文综合介绍了热端部件可修复性的定义、技术上的可修复性及可修复性评估的工艺流程等。重点论述了不同因素对可修复性评估的影响,并指出:热端部件的可修复性评估应在现有技术基础上,针对部件结构和使用特点,综合分析部件缺陷位置载荷要求、焊接修复区组织性能和结构可达性、工艺匹配性等特殊制约因素对热端部件可修复性的影响,在此基础上实现受损热端部件可修复性的合理准确评估。     

抗空发动机整体叶盘维修解决方案

国外应用实践表明，直接金属激光沉积工艺是目前一种高效的整体叶盘维修解决方案，也是一种经济高效的航空发动机零部件修复方法。本文阐述了直接金属激光沉积工艺的原理，并对其工艺特点和适用性进行了分析。     

WP7系列发动机涡轮导向器叶片盖板的钎焊修复

采用真空钎焊的方法对WP7系列发动机涡轮导向器叶片盖板进行了修复,介绍了修复过程及工艺。修复后的叶片经目视及荧光检验未发现表面裂纹,该修复工艺已成功用于WP7系列发动机涡轮导向器叶片盖板的批量修复,年修复量约1000件。