嫦娥一号卫星撞月时刻与坐标精确分析

针对CE-1卫星精确的撞月时刻与撞月点坐标,首先通过探测器载波信号的本地相关处理技术,精确分析了载波信号在VLBI各测站的消失时刻,进而推算了卫星的撞月时刻;通过实时单向多普勒频移测量的事后分析,核实了卫星撞月过程中的飞行姿态演化;最后结合VLBI互相关时延与测距资料,经定位归算确定撞月点坐标。分析表明,CE-1卫星撞月时刻的误差为±5μs,撞月点坐标月面切向和三维定位误差分别约为0.274km和0.319km(1σ)。     

可调高压导叶对1＋1/2对转涡轮性能影响的数值研究

对1＋1/2对转涡轮高压导叶转动不同角度后不同落压比时的涡轮性能进行了数值计算和分析,获得了不同导叶开度和不同落压比对涡轮性能影响的关系曲线.结果表明,高压导叶转角的变化可以有效地调节1＋1/2对转涡轮的流量;当导叶打开时,随着落压比的变化涡轮效率存在一个峰值,当导叶关闭时,涡轮效率随落压比的减小持续降低,并且降低的幅...     

北斗／罗兰-C组合定位技术

“北斗一号”是我国的卫星导航系统,其有源定位模式使其很难得到广泛应用。为此,提出了一种北斗／罗兰-C组合定位方案以实现无源定位。该方案利用“北斗一号”两颗卫星和地面罗兰-C台站获得的距离差信息实现双曲线相交定位。仿真结果表明,该方案的精度可以满足一般定位要求,具有较强的实用性。     

天问一号探测器高动态着陆惯导系统设计与试验

考虑到火星探测任务着陆过程动态变化大,稀薄大气环境下开伞会对探测器产生剧烈晃动,为此天问一号探测器研制了一套高动态着陆惯导系统,从硬件产品、使用时序到导航算法方面均进行了针对性设计,以适应着陆过程中的高动态环境.此外,为验证天问一号探测器高动态着陆惯导系统的性能,设计了模拟火星开伞工况的火箭弹高空开伞试验,结果表明该高...     

Variable Structure Control of Catastrophic Course in Airdropping Heavy Cargo

The mathematical model of a transport aircraft would be subjected to a sudden change when heavy cargo is dropped off in airdropping, which exerts serious influences upon the safety of the aircraft. A variable structure controller is specially designed for handling the airdrop process. The nonlinear system is linearized by input-output feedback linearization using differential geometry theories. On this basis, an inner loop system for velocity and attitude tracking control is designed by using the exponentially approaching rule of the variable structure theory. The whole flight control system is integrated with the outer loop flight altitude control. Digital simulation evidences the applicability of the system to potentially catastrophic course in airdropping heavy cargo and provides robustness against system parameter perturbation.     

基于FGN输入流的G/D/1排队模拟

传统的排队理论不适于分析高速网络表现出的自相似流量.通过实验仿真,主要考察平均等待时间和在队列分别为无限和有限情形下的队列尾部特征等参数,并对以FGN为输入流的G/D/1排队模型作了定性分析.结果表明在输入流的强度和方差基本相等且系统利用律大于某一阈值的情况下,队列平均等待时间随Hurst参数增大而显著增长.同时指出在相同的条件下考察队列尾部特征,具有有限队列长度的G/D/1排队模拟结果要远优于无限队列长度下的理论分析结果.      

任务教学法在Protel 99 se课程教学中的应用

任务教学法是一种以学生为中心,以任务为驱动的教学方法,它适用于实践性很强的prote199se课程.在一个个任务完成后,激发了学生自主学习的积极性,使学生在实践中学会了各种命令的使用,掌握了技巧,从而可以取得满意的教学效果.     

The effect of neglecting VLBI reference station clock offsets on UT1 estimates

Very Long Baseline Interferometry (VLBI) allows to monitor universal time (UT1) by conducting regular international experiments. Such dedicated observation networks are equipped with different hardware components, which require different processing strategies when the data are correlated. As the timing units at each stations are usually offset with respect to universal time (UTC) this effect should be considered during correlation processing. Thus, it is investigated how neglecting of these offsets theoretically impacts the estimation of UT1. Three different strategies for the proper handling of the timing offset will be discussed and their advantages/drawbacks will be pointed out. Moreover, it is studied how neglecting of these timing offsets affects UT1 time-series and how such a missing correction can be applied a posteriori. Although the discussed effect is for most of the UT1 experiments smaller than the formal error of the estimates, it is important to consider station clock offsets properly in next-generation VLBI systems, which are expected to improve accuracy of results by about one order of magnitude.     

浮空器管材结构连接方式比较及拉伸强度分析

浮空器结构件如吊舱、过渡架及推进支架等多采用金属管材连接。目前,浮空器管材结构连接缺乏使用工况下极限值实测数据,材料及连接方式选择的理论支撑尚有不足。据此,对常用管材的不同连接方式进行比较及断裂分析。研究中铝合金和钛合金管材分别采用螺接及焊接的方式进行连接,测试样品的力学性能并结合仿真分析验证其断裂原因。结果表明:TA1钛合金管材采用焊接连接方式,相对螺接方式连接强度提高 87.9%;6061铝合金管材采用螺接连接方式,相对焊接方式连接强度提高 39.3%。2A12铝合金管材焊接连接强度优于螺接连接强度。同时,分析断裂原因发现,管材形变是影响焊缝连接强度的重要因素;应力集中易发生在管材端部连接处,导致端部焊缝发生断裂;管材形变会使母材断裂时伴有撕裂现象,进一步降低管材的最大连接强度。     

Cd1-xZnxS体系红外光谱及发射率特性

制备了Cd1-xZnxS三元系半导体材料。利用X射线衍射(XRD)对其结构进行了表征,结果表明实验所得样品均为纤锌矿结构。建立了Cd1-xZnxS混晶替位模型,根据所建模型和晶格振动理论,对Cd1-xZnxS红外光谱特性进行探讨。研究了Cd1-xZnxS三元系半导体材料红外发射率特性,Cd1-xZnxS在3~5μm波段的发射率远远低于8~14μm波段的发射率,这与材料的红外吸收机制和光谱特性有关;Cd1-xZnxS半导体材料的红外发射率随着烧结温度的提高而降低,这是由于温度升高,晶格畸变减小并逐渐趋近于完整晶格。