直升机疲劳和静力试验伺服控制系统的研究

本文主要详细的介绍了用于直升机动部件结构的疲劳和静力试验中全数字式的多通道伺服控制系统的总体设计及各功能模块的划分。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

Experimental Aspects of Mid-Frequency Pulsations (f≈10–100 mHz) in the Southern Polar Cap

We review the results obtained in the frequency range of Pc3 (22-100 mHz) and Pc4 (7-22 mHz) pulsations at Italian Antarctic stations in the southern polar cap (“Mario Zucchelli”, at Terra Nova Bay, TNB, 80^˚.S; “Concordia”, the Italian/French base at Dome C, DMC, 89^˚.S). The absence of a midnight enhancement in the pulsation power suggests a negligible substorm influence at extreme latitudes, while the sharp noon enhancement, which appears only at TNB, is determined by the closer proximity of the station to cusp related phenomena. The relationship between the frequency of the band-limited signals and the interplanetary magnetic field strength, the cone angle influence, and the higher correlation of the Pc3 power with the solar wind speed in the morning hours suggest a global scenario in which upstream waves would be mainly responsible for the mid-frequency activity in the polar cap. However, the polarization pattern is odd with respect to the predictions for tailward propagating modes.     

飞机座舱有机玻璃机械加工应力测量方法研究

 通过实验研究了有机玻璃由于机械加工所产生的双折射条纹的性质及其与机械加工应力的关系;建立了一种定量测定和无损检测平板有机玻璃和飞机座舱有机玻璃件机械加工应力的新方法:用光弹性仪可以测得与双折射有关的干涉条纹,则可确定加工应力。     

美陆军制导武器试验半实物仿真技术综述

主要综述美国陆军制导武器试验的仿真技术和设施，同时介绍仿真试验中使用的几种典型的目标景象投影技术，并说明了它们的应用范围和优缺点。最后介绍了当前制导武器试验仿真技术的发展趋势。     

TiFe0．86Cr0．1／NaM复合贮氢材料的合成与性质

 利用蒸汽相法制备沸石技术合成ＴｉＦｅ０．８６Ｃｒ０．１／ＮａＭ复合贮氢材料的各种条件,找到了较适宜的碱度ＳｉＯ＿２／Ａｌ＿２Ｏ＿３以及合金与沸石。研究了合成条件对贮氢容量的影响,结果表明,沸石为单一晶相合成粒度不低于７４μｍ为佳。同时,该材料亦表现出良好的抗Ｏ＿２、ＣＯ＿２中毒特性。     

翼型风洞侧壁干扰的数值模拟研究

运用Navier-Stokes数值模拟对翼型模拟试验对风洞侧壁干扰进行模拟，将简单代数湍流模型扩展用于机翼／风洞侧壁结合区流动，分析了风洞实验侧壁干扰问题的形成机理和影响翼型实验侧壁干扰的各种因素，如翼型展长、风洞侧壁边界层厚度及侧壁边界层抽吸等，对实验结果的影响，得出了一些有用的结论。计算格式空间采用中心有限体积离散，时间采用多步Runge-Kutta时间步长格式进行积分。计算结果证明了该方法的可行性和优越性。     

利用林胶茶人工群落减弱台风对橡胶林破坏机理的风洞模拟试验研究

本文研究台风登陆时（中性大层结）胶茶人工群落内部及上部风速的变化，湍流结构的变化及阻力的变化，来分析判断基减弱台风破坏的机理，评定最佳防风效果的林胶茶人工群落方案。试验研究证明台风吹向胶茶人工群落，台风越过和穿过林带，由于气流与树冠，枝叶的冲击与摩作用，使台风风速大大降低，使动能大大损失，使原来动能强和湍流弱的较大尺度旋涡的台风，变成旋涡尺度较小的动能弱湍流强的湍流，湍流能量的增强反映了风速递减率     

街道峡谷湍流流动的风洞试验与数值计算

在１：２５０的风洞模型上,测量街道峡谷的平均流速,湍流度等参数,分析了街道峡谷内的湍流流动状态,探讨了屋顶来流风在街道峡谷内产生复杂流场的主要特征,并用三维湍流流模型对风洞试验模型进行了数值计算,试验和计算结果为研究街道峡谷风环境以及街道峡谷的传热传质过程提供了基础。     

歼击机载荷谱编制方法的研究

 <正> 1.引言 国内外大量的研究表明,编制飞机载荷谱应考虑载荷的大小,频数、顺序和分布这四方面的因素,只有在这四方面都摸拟了飞机实际飞行情况,才能保证载荷谱的真实性。 程序块谱只考虑了载荷的大小和频数,所以逐渐被飞-续-飞谱所取代,飞-飞谱是按一个飞行接一个飞行编制的载荷谱。由空测数据编制这种谱的常规方法是先对法向过载系数ny进行计数处理,得到某个任务段(或任务剖面)内ny的大小和频数,而后将计数结果在该任务段(或任务剖面)内离散,生成ny的随机序列。与此同时,给出其它各主要气动参数的概率分布,然后按概率的大小组合成几种典型的飞行状态,再由飞行状态计算出对应的载荷分布。最后以这几种载荷分布为基础,根据ny的大小进行线性折算,得到各级ny下的载荷和载荷分布。