排序方式: 共有75条查询结果,搜索用时 15 毫秒
1.
脉冲等离子体推力器是一种具有发展前景的电推进装置,具有比冲高、质量轻等优点,可用于微小卫星的姿态控制、轨道转移等任务。以ADD SIMP–LEX推力器为例,建立数学仿真模型,并对舌形张角型极板构型进行仿真,经过仿真和实验结果对比,探究了不同极板参数对推力器的主要性能参数(元冲量、效率、比冲等)的影响,研究结果表明:增大宽度比,元冲量和效率随之增大,比冲有所降低;增大张角,元冲量和效率也随之增大,比冲略有降低,但幅度不大。 相似文献
2.
Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode. 相似文献
3.
4.
5.
6.
航空航天难加工材料直纹面构件的高精度高表面完整性加工已经成为制造领域普遍关注和亟需解决的难题,电解线切割加工在高表面完整性要求加工场合上具有原理性优势。建立脉冲电流电解线切割加工模型,分析了工件厚度变化带来的影响。试验结果表明:随着工件厚度增加,电解液电阻减小,工件两端极间电压减小,加工缝宽变窄;双电层时间常数增大,脉宽时间内充电所能达到的电位降低,有效加工时间变短,平均电流密度较低;脉冲频率大于20 kHz时,最大进给速度随频率增加而快速减小,低于20 kHz时,最大加工速度差别较小。最后,采用脉冲频率20 kHz,以进给速度4 μm/s稳定加工出20 mm厚榫头/榫槽结构,表面粗糙度约为0.449 4 μm,表面质量、加工效率明显高于100 kHz加工效果。 相似文献
7.
8.
扭叶片整体叶轮电火花加工成形电极设计 总被引:2,自引:0,他引:2
针对目前整体扭叶片叶轮难于加工的现状,提出了采用分离式组合成形电极加工整体叶轮的方法。同时还对成形电极设计过程中遇到的进给方向确定,避免与相邻叶片发生干涉等具体问题进行了论述 相似文献
9.
电火花铣削可以利用简单电极加工复杂工件,对铣削过程中电极损耗进行补偿是保证工件加工精度的重要措施。使用圆柱电极进行定长补偿铣削加工,加工过程中电极端面会形成一个圆锥形。为保证补偿精度,对电极圆锥形端面的形成及稳定性进行了研究。通过对定长补偿下工件被加工情况的研究,阐述了圆锥形电极形成的具体过程;并且论证了在加工进入稳定阶段以后,圆锥端面角度会基本保持在一个恒定值,研究了初始加工深度和补偿长度对锥形过渡阶段的影响;在电极直径、电参数一定情况下,验证了加工模型中锥形角度与目标加工深度的函数关系,实验结果与模型计算结果相差2.1%;最后给出了加工实例,并获得较好的加工效果。 相似文献
10.