Semi-supervised gear fault diagnosis using raw vibration signal based on deep learning

In aerospace industry, gears are the most common parts of a mechanical transmission system. Gear pitting faults could cause the transmission system to crash and give rise to safety disaster. It is always a challenging problem to diagnose the gear pitting condition directly through the raw signal of vibration. In this paper, a novel method named augmented deep sparse autoencoder (ADSAE) is proposed. The method can be used to diagnose the gear pitting fault with relatively few raw vibration signal data. This method is mainly based on the theory of pitting fault diagnosis and creatively combines with both data augmentation ideology and the deep sparse autoencoder algorithm for the fault diagnosis of gear wear. The effectiveness of the proposed method is validated by experiments of six types of gear pitting conditions. The results show that the ADSAE method can effectively increase the network generalization ability and robustness with very high accuracy. This method can effectively diagnose different gear pitting conditions and show the obvious trend according to the severity of gear wear faults. The results obtained by the ADSAE method proposed in this paper are compared with those obtained by other common deep learning methods. This paper provides an important insight into the field of gear fault diagnosis based on deep learning and has a potential practical application value.     

Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

太阳能飞机循环飞行的高度剖面能量策略

为满足设定的太阳能飞机多日连续飞行条件，依据飞行过程中当前时刻的飞行高度、光伏输出功率、动力电池组余量等系统状态参数，研究如何分配动力电池组充放电和电推进系统输入等功率。所用策略立足于实时功率平衡，充分利用正午前后的光伏峰值功率用于飞机爬升及充电，在午后下滑过程中利用全部光伏输出，以最大化利用光伏资源；在光伏有效输出不足时则以一定的维持功率下滑，使能量的综合损失最小。方法能够提高以预定夜间飞行高度连续多日续航的成功率，提升飞行高度、纬度、季节范围或搭载能力，或者拓展这几种飞行条件的组合域，优化太阳能飞机的适用性。     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

高速低压差分信号（LVDS）器件应用设计方法研究

随着高速LVDS器件得到广泛应用，在高速信号使用LVDS传输时，信号传输线路问题、信号传输波形的最佳化成为非常重要的课题之一。由于印制电路板的布局布线直接影响信号传输质量，因此利用仿真对印制板分析成为设计上不可缺少的手段。有鉴于此，文章深入探讨了高速电路的设计，总结出设计技巧。     

RPC-MAG The Fluxgate Magnetometer in the ROSETTA Plasma Consortium

The fluxgate magnetometer experiment onboard the ROSETTA spacecraft aims to measure the magnetic field in the interaction region of the solar wind plasma with comet 67P/Churyumov-Gerasimenko. It consists of a system of two ultra light (about 28 g each ) triaxial fluxgate magnetometer sensors, mounted on the 1.5 m long spacecraft boom. The measurement range of each sensor is ±16384 nT with quantization steps of 31 pT. The magnetometer sensors are operated with a time resolution of up to 0.05 s, corresponding to a bandwidth of 0–10 Hz. This performance of the RPC-MAG sensors allows detailed analyses of magnetic field variations in the cometary environment. RPC-MAG furthermore is designed to study possible remnant magnetic fields of the nucleus, measurements which will be done in close cooperation with the ROSETTA lander magnetometer experiment ROMAP.     

Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

高速低压差分信号(LVDS)器件应用设计方法研究

随着高速LVDS器件得到广泛应用,在高速信号使用LVDS传输时,信号传输线路问题、信号传输波形的最佳化成为非常重要的课题之一。由于印制电路板的布局布线直接影响信号传输质量,因此利用仿真对印制板分析成为设计上不可缺少的手段。有鉴于此,文章深入探讨了高速电路的设计,总结出设计技巧。     

逆合成孔径雷达信号处理方法研究进展

在简要评述国内外现有的逆合成孔径雷达（ISAR）信号处理的运动补偿和成象方法之后，介绍了南京航空航天大学ISAR课题组近年来在ISAR信号处理方法研究中取得的主要进展，包括基于多散射点定位观点的雷达成象观测模型，基于最大似然原理的同时运动补偿和成象方法，基于最大似然原理的多目标成象方法和基于时频分析的多目标成象方法，以及超分辩成象方法，文末指出了在ISAR信号处理方面有待进一步研究的问题。     

月食过程月表太阳辐照和温度变化模拟

月食对月球轨道探测器的温度有重要的影响,分析月食时月表的太阳辐照和温度,具有重要意义。文章给出了通用的月表温度模型和月食时月表太阳辐照模型,根据某次月食的天文参数,用太阳辐照模型可求出月表任一点在月食时的太阳直接辐照变化过程,代入温度模型可求出任一点的温度变化过程。此模型和方法可用于对任何一次月食的分析,并以2007年8月28日的月食为例,模拟了该次月食的表面太阳直接辐照和温度的变化过程。