涡旋真空泵的密封设计

涡旋真空泵在工作过程中动、静涡盘之间间隙存在泄漏损失,它是影响涡旋真空泵工作性能的重要因素;总结了涡旋真空泵的工作原理;介绍了涡旋真空泵的密封设计与选择、间隙的确定。从材料和结构两方面阐述了密封的几种结构形式,说明了各自的工作原理,及需要注意的问题,阐明这些问题是影响泵性能指标的重要因素。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

稀土金属配合物的发光性能研究进展

稀土元素由于含有f电子而使得稀土金属配合物具有许多独特的物理和化学性质，尤其是优良的发光性能。本文介绍了稀土金属配合物的光致发光和电致发光以及近年来国内外在该方面的最新研究进展。     

精密加工中切削方向毛刺生成机理的研究(英文)

金属切削毛刺是切削加工中产生的常见现象之一。本研究以金属切削实验为基础 ,对二维精密切削中切削方向毛刺的形成过程、主要影响因素及其变化规律进行了系统的实验研究和相应的理论分析 ,结果表明 :( 1 )切削方向毛刺形成过程为正常切削、挠曲变形、弹性效应、继续切削和剪切断裂分离 ;( 2 )发现了切削方向毛刺形成过程中的切屑与工件表面剪切断裂分离的特殊现象 ;( 3)切削方向毛刺尺寸和形态随着切削条件和刀具几何参数的变化而变化。     

Collision Risk Mitigation in Geostationary Orbit

The short- and long-term effects of spacecraft explosions, as a function of the end-of-life re-orbit altitude above the geostationary orbit (GEO), were analyzed in terms of their additional contribution to the debris flux in the GEO ring. The simulated debris clouds were propagated for 72yrs, taking into account all the relevant orbital perturbations.The results obtained show that 6–7 additional explosions in GEO would be sufficient, in the long term, to double the current collision risk with sizable objects in GEO. Unfortunately, even if spacecraft were to re-orbit between 300 and 500km above GEO, this would not significantly improve the situation. In fact, an altitude increase of at least 2000km would have to be adopted to reduce by one order of magnitude the long-term risk of collision among geostationary satellites and explosion fragments. The optimal debris mitigation strategy should be a compromise between the reliability and effectiveness of spacecraft end-of-life passivation, the re-orbit altitude and the acceptable debris background in the GEO ring. However, for as long as the re-orbit altitudes currently used are less than 500km above GEO, new spacecraft explosions must be avoided in order to preserve the geostationary environment over the long term.     

纤维缠绕复合材料壳体中金属嵌件的受力分析及优化设计

本文对一纤维缠绕复合材料壳体中金属嵌件进行了受力分析及形状设计。通过受力分析与设计使得复合材料与金属嵌件接触面应力分布合理化，保证了接触面的变形协调，得到了优化的金属嵌件形式。     

腐蚀对sic/Al(L2)和sic/Al-Ni复合丝力学性能的影响~①

本文对SiC/Al(L2)和SiC/A1-Ni复合丝在蒸馏水和在3.5％NaCl溶液中的耐腐蚀性能进行了研究。通过测试腐蚀前后复合丝的抗拉强度,利用气相色谱、发射光谱、X射线衍射等手段分析腐蚀气体和腐蚀产物,观察金相和扫描电镜下形貌的变化,发现SiC/A1复合丝在室温蒸馏水中36天、50℃和75℃蒸馏水中各15天浸泡后,其抗拉强度基本保持不变,说明该类复合材料对潮湿环境具有良好的耐腐蚀性能;SiC/A1-Ni复合丝在3.5％NaC1溶液中浸泡后,其抗拉强度随溶液温度升高和时闻延长而逐渐下降;其腐蚀主要是选择性腐蚀,其次是孔蚀和缝隙蚀。     

TC4钛合金的微动磨损及防护

对Ｔｉ－６Ａｌ－４Ｖ合金在１８℃，１００℃２５０℃下的微动磨损特性及防护工艺进行了研究。表明：该合金微动磨损的主要磨损形式是疲劳脱层，其磨损量随温度升高而下降，高渐微动磨损量与磨损区表面所形成的氧化层的性质及厚度有关。     

具有弹性环的有限大弹性板应力场分析

 本文用解析与数值结合法研究在含有椭圆孔的有限大小弹性板上,有一椭圆弹性环加强时,板及环上的应力场。假设板与环间处于无初应力的紧密接触状态,弹性板和弹性环的应力函数都可按复劳伦级数展开。根据孔与环的接触边界条件以及各自的外边界条件,运用节点配置法确定板、环的级数系数,从而求出板、环上的应力场。文中分析了级数项数一配点数对计算结果的影响。     

有限局部环上酉群的Sylow子群

设K=Fq2,其特征为p,q=pα,K有对合自同构:ωa|→aq,G是一个p-群,其阶为p,β群代数R=KG为一局部环。本文给出了R=KG上酉群U2nR的Sylow子群,若charK=p,U2nR的Sylow p-子群同构于某些特殊形式的矩阵生成的子群;若charK=p≠l,U2nR的Sylow l-子群同构于一循环群或半二面体群与若干Zl型循环群的圈积。