A comprehensive survey on the methods of angle of attack measurement and estimation in UAVs

Angle of Attack (AOA) is a crucial parameter which directly affects the aerodynamic forces of an aircraft. The measurement of AOA is required to ensure a safe flight within its designed flight envelop. This paper intends to summarise a comprehensive survey on the measurement techniques and estimation methods for AOA, specifically in Unmanned Aerial Vehicle (UAV) applications. In the case of UAVs, weight constraint plays a major role as far as sensor suites are concerned. This results in selecting a suitable estimation method to extract AOA using the available data from the autopilot. The most feasible and widely employed AOA measurement technique is by using the Multi-Hole Probes (MHPs). The MHP measures the AOA regarding the pressure variations between the ports. Due to the importance of MHP in AOA measurement, the calibration methods for the MHP are also included in this paper. This paper discusses the AOA measurement using virtual AOA sensors, their importance and the operation.     

Influence of thickness and initial groove angle in M–K model on limit strain of 7B04 by considering through-thickness stress

Marciniack–Kuczinski (M–K) model is widely used to predict material’s forming limit curve (FLC). The prediction of FLC traditionally neglected through-thickness normal stress. However, it cannot be neglected in some forming processes. Much work has been done to study the effect of through-thickness normal stress on FLC with constant through-thickness normal stress or constant ratio of through-thickness normal stress and maximum principal stress. In addition, based on Nakazima test process, the ratio of through-thickness normal stress and maximum principal stress has been derived, which was a function of instantaneous thickness and loading path. Here, initial groove angle in M–K model was not considered. In this paper, uniaxial tension tests and Nakazima tests were performed on 7B04 aluminum alloy. Based on Hill 48 yield criterion and M–K model, the prediction model of FLC was established. The increase of thickness can enhance FLC. Meanwhile, it is necessary to consider through-thickness normal stress and initial groove angle in prediction model. On the left side of FLC, the effect of initial groove angle on FLC is weakened by increasing sheet thickness. On the right side of FLC, the effect of initial groove angle on FLC is strengthened by increasing sheet thickness. On the right side of FLC, the relation between limit strain points with different thicknesses is linear under one certain loading path. Thickness has decisive effect on through-thickness normal stress level and the changing trendy of through-thickness normal stress during calculation is different under different stress condition.     

基于DOA聚类算法的ARM抗有源诱偏技术研究

有源诱偏技术是雷达对抗反辐射导弹的一种重要手段,可以大大降低反辐射导弹的作战效能。为提高对敌目标的精确打击能力,在分析闪烁诱饵诱偏原理的基础上,针对有源诱偏干扰下被动雷达测角精度与稳定度不高的问题,通过对有源诱偏信号的时域特征进行分析,提出一种基于脉冲前沿检测的DOA聚类分选算法,找出前沿超前的辐射源信号,实现了高性能抗有源诱偏干扰和高精度抗干扰测向。仿真结果表明,该技术可以有效对抗四点源有源诱偏干扰。     

FDI飞机舵面损伤故障全局检测的非线性数学模型

阐述了飞机在单舵面损伤故障下 ,建立故障状态下的数学模型 ,以及同样输入条件下飞机正常运动时的数学模型 ,得到飞机在相同飞行条件下损伤时的气动系数和无损伤正常时的气动系数 ,最终得到气动系数的残差。这将为以后飞机过载残差和角加速度残差奠定基础。论文中结合一定的算例给予证实推论的正确性。     

燃烧火焰温度分布重建结果误差分析

分析了采用辐射型CT算法的燃烧火焰温度发布重建结果误差产生的原因，给出了解决方法。     

世界贸易组织与航空产品包装

论述了我国加入世界贸易组织后，如何搞好航空产品的包装和包装标准化工作，以提高航空工业军品和民品在国际市场的竞争能力。     

河北省高校农村生源学生思想现状调查研究

河北省农村人口占总人口的79％，是一个比较典型的农业大省。农村生源大学生，是河北省在校大学生的重要组成部分，占生源的最大比例。大学生是宝贵的人才资源，他们的素质尤其是思想政治素质如何，他们能否成为社会主义事业的合格建设者和可靠接班人，是一个非常重要的问题。因而，科学分析和把握他们的思想政治状况，将会增强我们把握大学生思想脉搏的准确性和说服力。为此笔者选取了河北省八个地市的不同高校，进行了问卷调查、座谈和访谈。对河北省农村生源大学生的思想现状进行了调查。通过统计软件的录入和整理，统计结果比较真实地显示了当前河北省农村生源大学生的思想现状。     

空间推进器制造中的可破坏性工装

由于航天研究的特殊性,其预研型号零件一般批量很小,并且有许多零件不易装夹。选用一种不同于传统专用工装的可破坏性工装,其材料可以是金属的,也可以是非金属的。为保证进度,必须建立预先性的可破坏性工装的数据库。采用可破坏性工装缩短了研制周期,降低了研制成本。     

一种卫星间跟瞄方向的控制策略与实现

进行自由空间的光通信或空间对抗，需要在卫星间实现精确的跟踪与瞄准。因为地面测控站的设置非常有限，指令与数据注入的范围受到很多限制，所以要求这种跟瞄在很多时候是无主控制状态下完成的。提出了一种利用在地面测控站的范围内向星上数管中心注入目标卫星、本体卫星的轨道参数，其它时间依靠自主导航飞行和GPS修正的方法，结合本体星的姿态测量、振动测量实现卫星瞄准指向的方位角与俯仰角的精确控制的方法，提高了在地面站无法注入指令与数据时卫星的捕获概率。通过仿真，将计算结果与卫星仿真工具软件STK的数据进行比较，结果一致。最后在嵌入式DSP平台上实现了这一策略。     

薄膜充气管充气展开特性试验

用展开导轨消除因重力产生的摩擦力,在不同充气速率与初始展开角条件下对薄膜材料充气管的充气展开特性进行了试验研究,获得了展开角,以及展开加速度和内气压的变化规律。试验及分析结果表明:充气管的充气膨胀与展开相互独立,充气膨胀过程近似为等压增容过程,折叠部位的气压变化特性与整体气压变化特性差异明显。