Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

Modelling of Ejecta as a Space Debris Source

When a micro-debris or a micrometeoroid impacts a spacecraft surface, a large number of secondary particles, called ejecta, are produced. These particles can contribute to a modification of the debris environment: either locally by the occurrence of secondary impacts on the components of complex and large space structures, or at great distance by the formation of a population of small orbital debris. This paper describes firstly, the ejecta overall production, and secondly, the lifetime and the orbital evolution of the particles. Finally the repartition of ejecta in LEO is computed. Some results describing the population as a function of size and altitude are presented.     

Modelling of Spall in an Anisotropic Aluminium Alloy

Spall caused by hypervelocity impacts at the lower range of velocities could result in significant damage to spacecraft. A number of polycrystalline alloys, used in spacecraft manufacturing, exhibit a pronounced anisotropy in their mechanical properties. The aluminium alloy AA 7010, whose orthotropy is a consequence of the meso-scale phase distribution or grain morphology, has been chosen for this investigation. The material failure observed in plate impact was simulated using a number of spall models. The Hugoniot elastic limit and spall strength have been studied as a function of orientation, and compared to experimental results.     

Collision Risk Mitigation in Geostationary Orbit

The short- and long-term effects of spacecraft explosions, as a function of the end-of-life re-orbit altitude above the geostationary orbit (GEO), were analyzed in terms of their additional contribution to the debris flux in the GEO ring. The simulated debris clouds were propagated for 72yrs, taking into account all the relevant orbital perturbations.The results obtained show that 6–7 additional explosions in GEO would be sufficient, in the long term, to double the current collision risk with sizable objects in GEO. Unfortunately, even if spacecraft were to re-orbit between 300 and 500km above GEO, this would not significantly improve the situation. In fact, an altitude increase of at least 2000km would have to be adopted to reduce by one order of magnitude the long-term risk of collision among geostationary satellites and explosion fragments. The optimal debris mitigation strategy should be a compromise between the reliability and effectiveness of spacecraft end-of-life passivation, the re-orbit altitude and the acceptable debris background in the GEO ring. However, for as long as the re-orbit altitudes currently used are less than 500km above GEO, new spacecraft explosions must be avoided in order to preserve the geostationary environment over the long term.     

金属膜片贮箱膜片变形的数值模拟与失效分析

根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。在一定条件下，模拟了贮箱金属膜片的变形翻转过程，分析其翻转的特点，以及变形过程中表面压力、顶点径向位移和卷边处应力的变化，并给出了膜片失效原因。研究表明，数值模拟与试验结果较为吻合，所建分析模型合理。     

离散事件动态系统的GSMP模型及扰动分析

对离散事件动态系统（ＤＥＤＳ）的仿真过程建立了包含中断事件集和驱动事件集的广义半马尔可夫过程（ＧＳＭＰ）模型，对参数的无穷小扰动所引起的系统状态转移时刻进行了扰动分析，最后，讨论了扰动分析所需要的可变换条件和样本性能函数的关系，并提出值得进一步研究的问题。     

一类广义特征值问题的扰动研究

研究了实正则对的广义特征值扰动问题。对于求解结构动力学、弹性动力学中的振动模态及分析受外界扰动后引起的谐振频率的变化都有一定的意义。     

压电材料壳的广义变分原理和状态向量方程

将三维弹性材料的H-R变分原理引入到具有机-电耦合效应的三维压电弹性材料圆柱壳问题中,建立了对应于正交各向异性压电材料圆柱壳的Hamilton型广义变分原理。通过变分运算得到了柱坐标系下的状态向量方程,该状态向量方程也是Hamilton正则方程。最后指出纯正交各向异性弹性材料壳Hamilton型广义变分原理是变分公式的特例。变分原理的建立将有利于压电材料圆柱壳静力学和动力学问题的有限元方法或半解析法的推导。     

关于厚薄板弯曲分析的内位移杂交元法

 本文通过引入单元内位移和优化处理的单元应力场,以计入剪切变形的板弯曲能量泛函为基础,导出适用于厚、薄板分析的四边形杂交应力元。内力场和内位移的合理选择避免了单元零能模式的出现、避免了解的剪切自锁现象。该优化单元显示了较好的通用性和收敛性。对关于剪切自锁的RCI判据提出了反例、说明了它的局限性。     

科学计算中的高性能有限元算法

 圆周率的计算是科学计算的启示,它提供了许多信息,包括计算误差的正负、大小,以及算法的加速。在偏微分方程的计算中,有无相似的内容,这就是本文试要回答的问题。