国外对GAP／AN推进剂燃烧性能和感度的研究

介绍了国外对ＧＡＰ／ＡＮ复合燃烧性能研究的新进展，探讨了少量添加剂对ＧＡＰ／ＡＮ推进剂燃速特征的影响，评价了ＧＡＰ／ＡＮ推进剂的印感性能。     

Efficacy of Doppler ultrasound [correction of utrasound] for screening symptoms of decompression sickness during simulated extravehicular activities

Doppler ultrasound is frequently used for monitoring circulating microbubbles during decompression to assess the symptoms of Decompression Sickness (DCS). This analysis was carried out to evaluate its effectiveness for screening symptoms of DCS during simulated extravehicular activities (EVA). The information from various hypobaric chamber studies carried out at the NASA Johnson Space Center, Houston, TX was used in this analysis (n = 516). The circulating microbubbles were detected in the precordial area in 42% (218/516), and symptoms were reported in 16% (81/516) of these exposures. The accuracy of Doppler-detectable bubbles (Spencer grades) on all symptoms of DCS was examined by calculating measures of sensitivity and specificity. The efficacy of Doppler as a screening device was examined by calculating their positive predictive value (PPV) and negative predictive value (NPV). The results of these analyses indicated that the sensitivity of Doppler decreased, and the PPV increased with higher Spencer grades. However, the likelihood of detecting true negative cases (NPV) was consistently higher with all bubble grades. Due to the high false-positive rate and low prior probabilities of the risk of DCS, Doppler was found to be more useful to identify those who did not develop DCS, than to detect positive cases of DCS in the simulated EVA exposures.     

自由—自由结构振动模态的一阶导数

空间飞行器和车辆等一大类结构属于自由—自由结构。本文讨论这类结构的振动模态－阶导数计算问题，提出了一种改进的截尾模态展开法，将未知模态对模态导数的贡献用已知模态和系统矩来表达。针对刚度阵奇异问题，提出了移位措施，通过选择的移位系数，不仅解决了奇异问题，而且加速了算法的收敛速度。给出了一个数值例子，算例表明本文方法十分有效。     

混合移频静刚度法和直接扰动迭代法

本文对混合移频动柔度法的失代式进行等价变换，从而得到一个“变种”，该变种不包含混合移频系统的动柔度式F^△（λ*），这便消除了F^△（λ*）带来的近似性，另外，对直接扰动法也进行等价变换，引出可以省时地用于许多特征向量导数计算的直接扰动迭代法。最后，为了供读者参数，本文还导出了三种混合移频动柔度法的非迭代式，其中有两种恰好是另外两种动柔度法经混合移频后的非迭代式，这实际上已将另两种动柔度法也扩展到密集根情况了。     

悬臂空心梁式加速度计的设计

分析证明:悬臂梁式加速度计的灵敏度与它的谐振频率的平方成反比。因此,欲展宽频带而保持灵敏度不变就很困难。利用应力集中的方法可以有效地解决这一问题。采用空心梁结构不仅能产生应力集中而且能减少梁的自身质量带来的影响,可以有效地展宽频带。文中给出了几种梁的刚度计算。     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

纳米Sn-Zn-Fe复合氧化物气敏材料的研制

本文采用纳米材料制备技术（共沉淀法）,制备了十二种Ｓｎ－Ｚｎ－Ｆｅ复合氧化物气敏材料,将其制成元件后,进一步测试了气敏性能。结果发现其敏感度比用ＳｎＯ２、ＺｎＯ和Ｆｅ３Ｏ４机械混合制得的烧结元件大为提高,且有较好的选择性。     

小型磁偏转质谱计性能实验研究

自主研发了小型磁偏转质谱计,并对其质量范围、分辨本领、灵敏度和最小可检分压力四个主要性能指标进行了实验测试和比对。结果表明,该质谱计的质量范围为（1~143）amu,相对N₂的分辨本领为1400,灵敏度为4.2×10^-5 A/Pa,最小可检分压力为9.5×10^-7 Pa。该测试和比对结果为磁偏转质谱计进一步的优化设计和性能提高奠定了重要基础。     

双喷管差动式小推力测量装置的设计与分析

为了研究喷管型面对小推力火箭发动机推力性能的影响,设计并建设了双喷管差动式小推力测量装置及其附属设备.在测量装置中,基准喷管和待测喷管同轴反向设置,通过测量结构应变来直接测量两个喷管的推力差.对测量装置进行了简化模型理论分析,导出其灵敏系数理论公式.依据该公式进行关键参数设计,确定合理的灵敏系数,指导试验系统设计,以保证测量精度.验证性试验表明测量装置可以测量牛级推力差,标定曲线线性较好,以基准喷管推力作为比较对象,推力差的相对扩展不确定度为0.5％.推力差与基准喷管推力的比值越小,以基准喷管推力为比较对象的相对测量不确定度越小.测量装置可以用于小推力火箭发动机喷管性能分析及优化的试验研究.     

基于ERSM涡轮盘径向变形的非线性动态概率分析

为了准确设计高压涡轮盘和叶尖间隙,从概率的角度进行了涡轮盘径向变形的分析。介绍了高精度高效率的非线性动态概率分析的极值响应面方法 (Extremum Response Surface Method,ERSM),并建立了其数学模型。考虑材料属性和边界条件的非线性,以及热载荷和离心载荷的动态性,基于ERSM对涡轮盘径向变形进行了非线性动态概率分析,得到了输入输出参数的分布特征和影响涡轮盘径向动态变形的主要因素。最后,通过方法比较,验证了ERSM在保证计算精度的前提下能大大提高计算速度,节约计算时间,改善计算效率。为进行更有效的涡轮盘设计和优化,改善叶尖间隙设计和控制的合理性提供了有效依据。