A survey of safety separation management and collision avoidance approaches of civil UAS operating in integration national airspace system

Recent years have witnessed a booming of the industry of civil Unmanned Aircraft System (UAS). As an emerging industry, the UAS industry has been attracting great attention from governments of all countries and the aviation industry. UAS are highly digitalized, informationized, and intelligent; therefore, their integration into the national airspace system has become an important trend in the development of civil aviation. However, the complexity of UAS operation poses great challenges to the traditional aviation regulatory system and technical means. How to prevent collisions between UASs and between UAS and manned aircraft to achieve safe and efficient operation in the integrated operating airspace has become a common challenge for industry and academia around the world. In recent years, the international community has carried out a great amount of work and experiments in the air traffic management of UAS and some of the key technologies. This paper attempts to make a review of the UAS separation management and key technologies in collision avoidance in the integrated airspace, mainly focusing on the current situation of UAS Traffic Management (UTM), safety separation standards, detection system, collision risk prediction, collision avoidance, safety risk assessment, etc., as well as an analysis of the bottlenecks that the current researches encountered and their development trends, so as to provide some insights and references for further research in this regard. Finally, this paper makes a further summary of some of the research highlights and challenges.     

光栅信号时钟脉冲细分的误差分析

简介时钟脉冲细分技术的原理，着重分析其细分误差因素，给出了计算实际最大细分数的理论公式，并论述了光栅最大运动速度、时钟脉冲分频数和实际最大细分数之间的关系，对光栅信号时钟脉冲细分系统的参数设计具有指导意义。     

多点法测量形状误差的补偿控制系统

经过对误差分离技术理论进行了分析之后,又对误差补偿技术进行了研究,并建立了多点法测量形状误差的补偿控制系统。通过补偿主轴径向误差运动,提高了工件的圆度误差和圆柱度误差。     

航天火工装置推力测量的干扰分析

航天火工装置种类很多,性能各异。文章仅对广泛使用的弹射器和解锁器类火工装置的推力测量系统进行论述,分析测量过程中的干扰环节,说明不同干扰类型对测量结果的影响。并提出测试改进建议。     

航天火工装置推力测量的干扰分析

航天火工装置种类很多，性能各异。文章仅对广泛使用的弹射器和解锁器类火工装置的推力测量系统进行论述，分析测量过程中的干扰环节，说明不同干扰类型对测量结果的影响。并提出测试改进建议。     

一个简单有效的磁记录纠错系统

介绍一种简单有效的纠错编码方法 ,用于资源卫星高密度数字磁记录器 ,使误码率由 10 -6降低到 10 -11,同时介绍它的基本工作原理、实现方案及试验结果。     

平板弯曲问题的误差估计和网格自适应研究

本文对承受横向载荷的复合板设计了一个自动的误差估计和网络加密过程，并通过实际算例验证了此过程的有效性，结果证明所设计的过程能达到较高的计算精度。     

一种基于误差四元数的战术导弹垂直发射姿态调转控制器

针对战术导弹垂直发射姿态调转时的快速性要求，研究了垂直发射快速姿态调转的控制问题。首先基于误差四元数并结合垂直发射的具体特点，建立了战术导弹垂直发射的非线性数学模型；然后通过李亚普诺夫第二方法进行控制系统设计，得出了基于误差四元数反馈控制器。分析了系统的稳定性和鲁棒性。该控制器实现了绕欧拉特征轴的旋转，缩短了姿态调转的时间，最后通过仿真验证其有效性。     

多体分离抛撒初条件与分离特征参数

多次风洞自由飞多体分离抛撒实验均证实了被抛撒物运动初条件对抛离成功与否有决定性影响;为此可采取"戴帽"措施;但数值计算结果与此相反,因而需深入开展研究,解决问题。常规形式的风洞测力方法,无法模拟各分离体之间很大的相对速度。分离过程中"特征时间"是很小的,因而风洞实验以及数值计算必须计及非常小的"特征时间"所反映的非定常气动力。多体分离的实践表明,至少在快速分离过程中运动动力学相似是必需的。