Conditional sea surface statistics and their impact on geophysical sea surface parameters retrieved from SAR altimetry signals

In this study we present an analytical formulation of synthetic-aperture radar (SAR) altimetry signals including narrow banded nonlinear wave fields and conditional statistics between wave elevation displacements, horizontal wave slopes and vertical wave particle velocities. Considering the wave elevation displacements coskewness with respect to horizontal slopes leads to an analytical formulation of the electromagnetic bias within a SAR-mode altimeter stack. This formulation can be either parametrized by the significant wave height (SWH) and mean wave steepness, or in terms of the variance of vertical wave velocities. The effect of conditional vertical wave particle velocity variances with respect to the observed horizontal wave slopes close to nadir incidence angles leads to an effective reduction of the azimuth blurring of SAR-mode stacks. We present here a formulation of this effect by examining JONSWAP ocean wave spectra. In most cases this effect reduces the azimuth blurring by 10% to 30%. Additionally we investigate the effect of a nonlinear wave elevation displacement probability density function (PDF) on estimated geophysical parameters. We were able to show that including an elevation displacement skewness of 0.13 improves significantly the SWH consistency between altimetry and ECMWF Reanalysis v5 ERA5 results.All of these effects are validated with respect to ERA5 model data in the North East Atlantic region and in situ data located in the German Bight and Baltic Sea.The developed model can be used in both SAR and conventional altimetry retrackers.     

反射面的轴向电磁散射及外形优化

本文联合运用几何光学和等效电磁流法,导出了金属反射面轴向散射场和雷达截面(RCS)的简洁表达式,研究了从旋转二次曲面(凹面或凸面)中寻找具有最低RCS值的曲面形状优化方法,给出了一个典型实例的单站RCS立体分布图,以及最低RCS值所对应的波谷曲线和最佳表面参数。     

圆波导圆柱轴＋平面叶片终端不连续性的计算

分析了圆波导中“圆柱轴＋平面扇形金属叶片终端”的不连续性，根据电磁场互易定理和物理光学法（ＰＯ）计算了这种终端对波导模的反射系数。这个问题的研究可用来解决喷气式发动机进气道对电磁波的反射，进一步地利用本文的结果可计算进气道的雷达截面（ＲＣＳ）或极化散射矩阵。     

测控站点电磁兼容分析与预测技术研究

本文介绍了对测控站点内各测控设备的电磁干扰进行分析和预测的方法。系统采用干扰源与接收机逐对考虑的方式，极大简化了计算。并采用分阶段预测的方法，即分成：快速筛选、幅度筛选、频率筛选和详细预测四个阶段进行逐阶段分析和预测。     

螺旋相位板生成涡旋电磁波仿真研究

涡旋电磁波的产生方式有多种,使用涡旋相位板即为其中重要的一种方式。该文对螺旋相位板产生涡旋电磁波的情况进行了仿真.通过仿真。给出了在喇叭天线口面上覆盖螺旋相位板时生成的涡旋电磁波的幅度相位分布。     

小型电磁辐射敏感度自动测试系统的设计

介绍电磁辐射敏感度自动测试系统组成、工作原理和设计方法，叙述了硬件配置、系统控制、数据采集处理等软件设计。其中较详细地介绍了光纤式场强数据采集部分的设计。     

Electromagnetic waves observed by Venus Express at periapsis: Detection and analysis techniques

The magnetometer on Venus Express was designed to be able to obtain 128 Hz samples of the magnetic field from two sensors in a gradiometer configuration. This mode is used around periapsis to determine whether the signals reported at low altitudes near 100 Hz, had the properties of electromagnetic waves generated by electric discharges in the Venus atmosphere. The lack of a magnetic cleanliness program and the shortness of the magnetometer boom make this a challenging measurement. Fortunately the signals are sufficiently strong that they can be easily resolved with rather straightforward analysis techniques.     

长矩形盒零件超塑性胀形工艺加载规律的优化

本文通过对长矩形盒零件的力学解析，得到了优化加载规律的数学表达形式。按此规律进行气压胀形，与恒压胀形实验结果相比，能有效地提高成形极限，并使厚度分布情况有明显的改善。     

飞机机身近区电磁散射建模研究

采用物理光学法和一致性几何绕射理论，分析机身各 球面波照射下的近场电磁散射特性几何绕射并建立其雷达散射截面（ＲＣＳ）数学模型，同时对于复杂机身的前部，采用面元油、即采用双三次Ｂ样条技术对机外形进行拟合，然后再用一致性几何绕射理论进行计算。种方法具有一定的可信度。     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.