激励频段对航天器随机振动载荷的影响

在航天器随机振动等效准静态载荷计算中,高频因对随机振动载荷的贡献较小而可以被截去,但目前截止频率的选择还未有完全确定。为确定随机振动环境下的计算频段,文章设计了不同动态特性的组件进行不同截止频率的随机振动试验,并根据试验数据分析研究了不同特性组件在不同振动频段下应变的变化规律。研究结果认为,对于一般组件,随机振动的计算截止频率可取为组件主频率的1.5倍。针对非均匀输入加速度谱的随机振动载荷计算问题,文章提出分频段的分析方法。按3个基本频段计算随机振动载荷,分析得到了不同频段对总随机振动载荷贡献大小和规律,以及截止频率误差的影响因素和影响大小。算例表明,分频段法可以用于不同状态输入加速度谱的随机振动载荷计算。     

阻旋栅对密封静力与动力特性影响的数值分析与实验研究

密封动力特性对旋转机械转子系统稳定性影响较大,在密封入口端部设置阻旋栅是提高密封稳定性的有效方法。设计加工了无/有阻旋栅共5种密封结构,从数值分析与实验研究两个方面研究阻旋栅对密封静力与动力特性的影响规律。建立阻旋栅密封静力特性CFD理论模型,数值分析阻旋栅对密封泄漏量、切向速度以及周向压力分布的影响;应用不平衡同频激励法实验研究阻旋栅对密封动力特性的影响。研究结果表明:阻旋栅可降低密封的泄漏量,减小密封内流体的切向速度,进而降低密封内流体的周向压力差,且随着阻旋栅周向稠度与径向长度的增加,这种作用逐渐增大,这是阻旋栅抑制气流激振力的主要原因;预旋是密封产生交叉刚度的重要因素,密封的交叉刚度随进出口压比与转速的增加而增大;阻旋栅可有效降低密封的交叉刚度,增加密封的主阻尼,提高密封的稳定性。本文研究揭示了阻旋栅抑制密封气流激振力的机理,为设计阻旋栅密封提供理论依据。     

基于地面分布式数据中心的天地一体化网络

天地一体化网络通常具有覆盖范围广、数据传输量大等特点。现有的一体化网络研究侧重于网络间传输协议,以及如何有效管理网络资源等。但考虑到当前卫星网络数据处理能力相对较差,而地面网络发展已非常成熟,因此将一体化网络与数据中心网络融合,把数据中心网分布式地接入骨干光网络中,卫星作为网络的传输节点与地面分布式数据中心网络构成统一整体;以中国电信骨干网为基础,针对一体化网络的内部传输代价和外部请求代价等多种因素,进行折中,使用整数线性规划得到网络的最优化部署。所提出的网络架构能很好地满足一体化网络的要求,提供了一种具有竞争力的信息平台设计架构。     

基于涡系相交不稳定性的飞机尾流控制方法

在飞机飞行的过程中尾涡会伴随着升力产生,威胁后机的飞行安全.在简化机翼模型上添加扰流片,通过一个矩形翼以引入一个与主翼尾涡大小不同、方向相反的小涡,构建尾流自消散四涡系统,以期诱发尾涡的Rayleigh-Ludwig相交不稳定性.通过改变扰流片的大小形状,调整模型的攻角和拖曳速度,采用粒子图像速度场仪测量系统定量研究在低雷诺数下单主翼尾涡发展特性以及双涡相互作用特性.研究表明:在未添加扰流片时,尾涡环量在45个翼展内相对于初始环量基本保持不变;在添加扰流片的情况下尾涡的环量衰减可以达到35%~55%,而未添加的基本翼型的尾涡的环量则几乎保持不变,这说明添加适当的扰流片能诱发尾涡的Rayleigh-Ludwig相交不稳定性,加速尾涡的消散,当小涡和主涡的初始环量比为-0.489、初始距离比为0.5时,45个翼展范围内,尾涡环量衰减55.9%.本文系统性的实验结果可以为低尾流机翼的设计提供参考依据.      

Impact of bending dies with different friction forms on forming force and quality of tubes manufactured by free bending technology

In the 3D free bending forming system, the bending die can be designed either in a sliding type or rolling friction type. Bending die-based sliding friction type is often called normal bending dies; however, the bending dies-based rolling friction type includes bending die-based roller type and ball type in structure. In the current study, the impact of three bending dies on the forming force, and the bent tube quality was investigated. The obtained results showed that the tangential stresses and strains of the tubes formed by the bending die-based roller type were the smallest among the three bending dies. Besides, the spherical bearing force P_U was reduced drastically after using the roller type and ball type compared to the sliding friction type. Moreover, the uniformity of the wall thickness distribution of the tubes formed by the roller type and ball type was better than those obtained from the sliding friction type. In addition, the cross-section distortion rate was reduced by 2.8% using the roller type, and 1.8% using ball-type compared to the sliding friction type.     

Evaluation method for helicopter maritime search and rescue response plan with uncertainty

Helicopter plays an increasingly significant role in Maritime Search and Rescue (MSAR), and it will perform MSAR mission based on response plans when an accident occurs. Thus the rationality of response plan determines the success of MSAR mission to a large extent. However, with the impact of many uncertainty factors, it is difficult to evaluate response plans comprehensively before performing them. Aiming at these problems, an evaluation framework of helicopter MSAR response plan named UMAD is proposed in this paper, which reveals the influence mechanism of uncertainty factors based on Multi-Agent method and analyzes the mission flow based on Discrete Event System (DEVS) method. Furthermore, the evaluation criterion and indicators of response plan are extracted from the aspects of safety and effectiveness. Meanwhile, the Monte Carlo method is adapted to calculate the probability distribution and robustness of response plan comprehensive result. Finally, in order to illustrate the validity of this method, it is discussed and verified by an application example of evaluating multiple response plans to the same MSAR scenario. The results show that this method can analyze the influence of uncertainty more systematically and optimize response plans more comprehensively.     

Towards intelligent design optimization: Progress and challenge of design optimization theories and technologies for plastic forming

Plastic forming is one of enabling and fundamental technologies in advanced manufacturing chains. Design optimization is a critical way to improve the performance of the forming system, exploit the advantages of high productivity, high product quality, low production cost and short time to market and develop precise, accurate, green, and intelligent (smart) plastic forming technology. However, plastic forming is quite complicated, relating to multi-physics field coupling, multi-factor influence, multi-defect constraint, and triple nonlinear, etc., and the design optimization for plastic forming involves multi-objective, multi-parameter, multi-constraint, nonlinear, high-dimensionality, non-continuity, time-varying, and uncertainty, etc. Therefore, how to achieve accurate and efficient design optimization of products, equipment, tools/dies, and processing as well as materials characterization has always been the research frontier and focus in the field of engineering and manufacturing. In recent years, with the rapid development of computing science, data science and internet of things (IoT), the theories and technologies of design optimization have attracted more and more attention, and developed rapidly in forming process. Accordingly, this paper first introduced the framework of design optimization for plastic forming. Then, focusing on the key problems of design optimization, such as numerical model and optimization algorithm, this paper summarized the research progress on the development and application of the theories and technologies about design optimization in forming process, including deterministic and uncertain optimization. Moreover, the applicability of various modeling methods and optimization algorithms was elaborated in solving the design optimization problems of plastic forming. Finally, considering the development trends of forming technology, this paper discusses some challenges of design optimization that may need to be solved and faced in forming process.     

New one-axis one-sensor magnetic attitude control theoretical and in-flight performance

New one-axis magnetic attitude control is proposed. Only one attitude sensor providing any inertial direction measurements is necessary, magnetometer is not used. The control may be used as a backup capability in case main actuators or some attitude sensors fail. Sun pointing is achievable using only three-axis Sun sensor, so the control may be used to lower the power consumption during battery charging. Asymptotic stability of different equilibria depending on the satellite inertia tensor is summarized. In-flight results from “Chibis-M” microsatellite are provided proving general control performance.     

一种星上微振动引起像移量的测量方法

基于多色CCD各谱段分时成像的特点,提出一种高分辨率光学遥感卫星星上微振动引起像移量的测量方法。该方法依据多色CCD不同时刻获取地面同一景物的不同谱段图像间的匹配像移量差异,确定星上微振动引起的像移量。研究实例证明了文章提出方法的可行性,结果表明,频率越低,微振动引起的像移量越大,因此,应对高分辨率光学遥感卫星的微振动,尤其是低频部分进行有效抑制。     

重力测量卫星KBR系统相位中心在轨标定算法

针对低低跟踪(SST-LL)重力测量卫星K频段测距(KBR)系统相位中心在轨标定问题,提出了一种应用预测卡尔曼滤波算法的KBR系统在轨标定算法。首先,以磁力矩器和姿态控制喷气发动机为执行部件,对一颗卫星施加一定的组合力矩,使其绕另一颗卫星进行周期性姿态机动;然后,将星敏感器数据代入预测卡尔曼滤波算法中估计出卫星姿态;最后,根据KBR系统观测值与卫星姿态角之间的关系,利用扩展卡尔曼滤波算法估计出KBR系统相位中心的位置。数值仿真结果表明:KBR系统相位中心可以被实时估计,当存在较大的卫星姿态动力学模型误差时,KBR系统相位中心的标定误差仍在0.3mrad以内,证明此算法估计精度较高且鲁棒性强。