乘务类学生英语课程教学方法实证探析

通过问卷调查探析乘务类本科生对交际和非交际教学法及活动的认识和态度,旨在研究一种可以有效提高英语教学质量的方法.结果表明乘务类学生对交际教学活动和非交际教学活动都有偏好,因此对于此类学生更为有效的教学方法就是采取折中的综合性教学法.     

飞行冲突条件下基于几何算法的改航策略研究

航班改航飞行是在空域受危险天气及飞行冲突影响时的一种重要策略。针对初始改航航迹的生成,提出了改进的几何圆切法,用其规划出临时航线,绕过危险区。为避免潜在的飞行冲突,应用几何线性规划法进行了改航策略修正。最后,通过对我国现有航路的仿真分析,表明了算法的有效性。     

浅析TB200型飞机与SR20型飞机的差异

本文以翼型结构、操纵系统、动力系统和仪表布局四个方面为出发点,阐述了TB200型初教飞机和SR20型初教飞机存在的差异,从机型理论和实际应用方面提出建议,以期为差异改装和教学训练提供帮助。     

Optimal guidance for reentry vehicles based on indirect Legendre pseudospectral method

Development of a feasible guidance scheme for reentry vehicles is a challenge because of its significant nonlinearity and multi-constraints. A method for the implementation of three-degree-of-freedom guidance for constrained reentry vehicle is presented in the paper. First, the constrained trajectory is generated by Legendre pseudospectral method (LPM) and then the feasibily of the trajectory is validated. Based on the obtained reference trajectory, the guidance problem is converted into a trajectory state regulation problem which is a linear time varying system. A robust state feedback guidance law is generated in real time using indirect Legendre pseudospectral feedback method. Finally, simulation results illustrate that the overall guidance scheme can lead to a very accurately controlled flight with all the constraints satisfied even in the presence of initial state uncertainty.     

适用于空管人才选拔的人为因素实验室研究

以空中交通管制员职业特征为依据,深入探讨了适用于空管人才选拔的人为因素实验室的若干重要问题。构建了航空人为因素软件测试平台,并通过统计分析确定实验项目,以达到有效选拔空管人才的目的。     

基于产学研模式的飞机机务维修实训平台建设

目的探索构建校内生产性实训基地;方法以飞机结构腐蚀与控制实训平台的建设为例;结果阐述校内实现以产学研相结合模式来进行实训平台建设;结论对其它机务维修专业课程的实训平台建设起到引导的作用。     

Optimization of Air Route Network Nodes to Avoid ″Three Areas″ Based on An Adaptive Ant Colony Algorithm

Air route network(ARN)planning is an efficient way to alleviate civil aviation flight delays caused by increasing development and pressure for safe operation.Here,the ARN shortest path was taken as the objective function,and an air route network node(ARNN)optimization model was developed to circumvent the restrictions imposed by″three areas″,also known as prohibited areas,restricted areas,and dangerous areas(PRDs),by creating agrid environment.And finally the objective function was solved by means of an adaptive ant colony algorithm(AACA).The A593,A470,B221,and G204 air routes in the busy ZSHA flight information region,where the airspace includes areas with different levels of PRDs,were taken as an example.Based on current flight patterns,a layout optimization of the ARNN was computed using this model and algorithm and successfully avoided PRDs.The optimized result reduced the total length of routes by 2.14% and the total cost by 9.875%.     

Research on hypersonic aircraft using pre-cooled turbojet engines

Systems analysis of a Mach 5 class hypersonic aircraft is performed. The aircraft can fly across the Pacific Ocean in 2 h. A multidisciplinary optimization program for aerodynamics, structure, propulsion, and trajectory is used in the analysis. The result of each element model is improved using higher accuracy analysis tools. The aerodynamic performance of the hypersonic aircraft is examined through hypersonic wind tunnel tests. A thermal management system based on the data of the wind tunnel tests is proposed. A pre-cooled turbojet engine is adopted as the propulsion system for the hypersonic aircraft. The engine can be operated continuously from take-off to Mach 5. This engine uses a pre-cooling cycle using cryogenic liquid hydrogen. The high temperature inlet air of hypersonic flight would be cooled by the same liquid hydrogen used as fuel. The engine is tested under sea level static conditions. The engine is installed on a flight test vehicle. Both liquid hydrogen fuel and gaseous hydrogen fuel are supplied to the engine from a tank and cylinders installed within the vehicle. The designed operation of major components of the engine is confirmed. A large amount of liquid hydrogen is supplied to the pre-cooler in order to make its performance sufficient for Mach 5 flight. Thus, fuel rich combustion is adopted at the afterburner. The experiments are carried out under the conditions that the engine is mounted upon an experimental airframe with both set up either horizontally or vertically. As a result, the operating procedure of the pre-cooled turbojet engine is demonstrated.     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

气膜孔内局部堵塞对气膜冷却特性的影响

在吹风比为0.3~1.5,堵塞比为0.1~0.5范围内,对平板上单排倾斜气膜孔内局部堵塞所引起的冷气射流流动和冷却特性变化进行了数值研究,分析了堵塞比、堵塞位置和吹风比对绝热气膜冷却效率的影响.在研究参数范围内的研究结果表明:气膜孔出口端前缘的局部堵塞有利于抑制肾形涡,对气膜孔下游的绝热气膜冷却效率有改善作用,并且随着堵塞比和吹风比的增加,对冷却效果的改善越为明显.而在气膜孔出口端尾缘或侧边的堵塞则在较大的堵塞比下削弱气膜冷却效果.相对于气膜孔出气端的局部堵塞,在气膜孔进气端和中部的堵塞对绝热气膜冷却效率的影响要微弱得多.