室火轰燃的大涡模拟

采用一套修正的适用于低马赫数浮力流的N-S方程组来描述火灾场,运用Smagorinsky亚格子模型的大涡模拟方法对室内池火的轰燃发展过程进行了数值模拟,把模拟与实验结果进行了对比和分析。结果表明,该方法能较好地预测轰燃。同时模拟结果显示火焰区向房间后部偏转稍大,近壁处温度预测的误差大一些,随着亚格子模型的不断完善和计算能力的提高,用该技术来预测轰燃现象会更加准确。     

Reachable domain of spacecraft with a single tangent impulse considering trajectory safety

The reachable domain of the two-body transfer orbit with a single upper-bounded tangent impulse is studied. Three cases are analyzed for either the magnitude of the tangent impulse or the initial impulse point being free, or both being free. For a fixed impulse magnitude and a free initial impulse point, the initial orbit is proved to be one of the envelopes of the reachable domain. Moreover, the trajectory safety for the transfer orbit requires a lower bound on the perigee altitude and an upper bound on the apogee altitude. Then the ranges of the impulse magnitude and the initial true anomaly can be obtained by solving quadratic and cubic inequalities, respectively. If both constraints are required for an arbitrary impulse point, the range of the impulse magnitude is obtained with impulses at the perigee and the apogee. Several numerical examples with different eccentricities are provided to show the geometry of the reachable domain and to verify the proposed method.     

On-orbit determination and adjustment of electrostatic accelerometer lever arm

In order to ensure the proof mass center of electrostatic accelerometer (EA) is fixed at the center of gravity of satellite as precisely as possible, an on-orbit determination and adjustment strategy of EA lever arm is presented in this paper. The EA lever arm is determined using the observations of EA, gyro and magnetometer first. Then it is adjusted by screw slider mechanism. The simulation results demonstrate that the proposed strategy can be carried out several times to yield better accuracy. Meanwhile, the optimal geographic location for EA lever arm determination along each axis is found.     

Modified Rake architecture for GNSS receiver in a multipath environment

Multipath is one of the major error sources in satellite-based navigation systems. This paper proposes a new anti-multipath architecture, named Modified Rake (MRake), for Global Navigation Satellite System (GNSS) receiver. The architecture derives from RAKE receiver in communication system. It can track direct-path and multipath components separately from the received signal without consumption of much hardware resources or complex calculation. The MRake architecture uses an Amplitude Estimation Unit (AEU) to estimate the amplitude of each component, and a noncoherent DLL to adaptively control its time-delay. Since the receiver only uses the direct-path signal to calculate the user's position, the tracked multipath components are subtracted from the composite signal to reduce the multipath effect, and thus to reduce tracking error. MRake receiver shows better performance or consumes much fewer resources than traditional anti-multipath techniques.     

Research on hypersonic aircraft using pre-cooled turbojet engines

Systems analysis of a Mach 5 class hypersonic aircraft is performed. The aircraft can fly across the Pacific Ocean in 2 h. A multidisciplinary optimization program for aerodynamics, structure, propulsion, and trajectory is used in the analysis. The result of each element model is improved using higher accuracy analysis tools. The aerodynamic performance of the hypersonic aircraft is examined through hypersonic wind tunnel tests. A thermal management system based on the data of the wind tunnel tests is proposed. A pre-cooled turbojet engine is adopted as the propulsion system for the hypersonic aircraft. The engine can be operated continuously from take-off to Mach 5. This engine uses a pre-cooling cycle using cryogenic liquid hydrogen. The high temperature inlet air of hypersonic flight would be cooled by the same liquid hydrogen used as fuel. The engine is tested under sea level static conditions. The engine is installed on a flight test vehicle. Both liquid hydrogen fuel and gaseous hydrogen fuel are supplied to the engine from a tank and cylinders installed within the vehicle. The designed operation of major components of the engine is confirmed. A large amount of liquid hydrogen is supplied to the pre-cooler in order to make its performance sufficient for Mach 5 flight. Thus, fuel rich combustion is adopted at the afterburner. The experiments are carried out under the conditions that the engine is mounted upon an experimental airframe with both set up either horizontally or vertically. As a result, the operating procedure of the pre-cooled turbojet engine is demonstrated.     

基于量子行为鸽群优化的无人机紧密编队控制

随着军事、民用需求的提高和相关领域的技术推动，无人机编队协同作业已成为当今人们逐渐关注的焦点。无人机紧密编队是指无人机间侧向距离在1~2倍翼展内的编队，因其可有效改善编队中无人机的气动性能而备受瞩目。基于无人机紧密编队条件下的气动耦合效应，建立三维空间下的状态空间方程描述双机相对运动，并推导了紧密编队条件下的双机最优编队构型，在此构型下将人工势场法和编队控制相结合作为控制系统中的间接控制环，并针对基本鸽群优化算法的寻优缺陷利用量子行为规则对其进行改进，将改进后的鸽群优化算法和无人机控制量结合作为控制系统中的直接控制环，最后通过仿真对比验证了此控制系统对于紧密编队控制的有效性。     

Parameter analysis of PAF for whole-spacecraft vibration isolation

Whole-spacecraft vibration isolation, which is implemented by modification of the existing PAF (payload attach fitting), is a direct and effective approach toward improving the dynamic environment that a spacecraft experiences during its journey to the orbit. In this paper, based on Craig–Bampton component modal synthesis and theory about modal effective mass, both the condensed model and the simplified model of the whole-spacecraft vibration isolation system are obtained. By these models, effects of the PAF's parameters, i.e. stiffness and damping, on the transmissibility from the bottom of the PAF to the bottom of the spacecraft and acceleration response of the bottom of the spacecraft are analyzed. Results show that merely increasing the damping of the PAF can effectively attenuate the peak transmissibility, decreasing the stiffness of the PAF can further improve the vibration isolation performance, and can avoid resonance with the launch vehicle by adding enough damping in the PAF. Furthermore, the natural frequency of first lateral or longitudinal mode and their peak transmissibility of the spacecraft-PAF structure can only be estimated by the modal effective mass and the residual mass rather than the rigid body mass of the spacecraft.     

Structural health management technologies for inflatable/deployable structures: Integrating sensing and self-healing

Inflatable/deployable structures are under consideration as habitats for future Lunar surface science operations. The use of non-traditional structural materials combined with the need to maintain a safe working environment for extended periods in a harsh environment has led to the consideration of an integrated structural health management system for future habitats, to ensure their integrity. This article describes recent efforts to develop prototype sensing technologies and new self-healing materials that address the unique requirements of habitats comprised mainly of soft goods. A new approach to detecting impact damage is discussed, using addressable flexible capacitive sensing elements and thin film electronics in a matrixed array. Also, the use of passive wireless sensor tags for distributed sensing is discussed, wherein the need for on-board power through batteries or hardwired interconnects is eliminated. Finally, the development of a novel, microencapuslated self-healing elastomer with applications for inflatable/deployable habitats is reviewed.     

星形张拉整体可展结构分析

提出了一种星形张拉整体可展结构.该结构基于张拉整体单元转化的星形张拉整体结构构建,具有中心单一构件驱动即可实现结构折展的特点.针对星形张拉整体可展结构的工作原理、驱动原理、中心构件长度对结构参数和力学参数的影响等,通过理论分析和仿真研究,对其折展可行性进行了分析验证.