Field formation around negatively biased solar arrays in the LEO-plasma

Heavy emission caused by impacting plasma ions results in a fast discharging effect of the initially large surface potentials on the dielectric solar cells. This eventually counteracts the energization process of the plasma ions to the cover glasses and leaves no significant electric fields. Thus, with an existing thermal plasma, electrons are again able to reach dielectric surfaces. Strong localized electric fields of the order of several 10 kV/cm form near the interconnector-cover glass interface.     

EUV emission from normal galaxies

Using data from the Wide Field Camera EUV all-sky survey, we have established upper limits to the EUV flux from a sample of 30 bright, nearby, non-active spiral galaxies. These galaxies were chosen to be those most likely to be detected in the EUV on the basis of (i) low interstellar absorption within our own galaxy, (ii) brightness in other wavebands, (iii) high star formation activity, and (iv) proximity. The derived EUV upper limits are restrictive, and establish for the first time that the EUV flux escaping from galaxies does not constitute a major component of their bolometric luminosity, and in particular that it cannot be the sink for the energy injected into the interstellar medium by supernova explosions, as had been suggested following the failure to detect this power in the X-ray band.     

High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

电泵起停控制与电机多功能保护电路

某些场合，电泵要在特殊的环境和条件下长期连续的工作，因此配置特殊的起停控制电路和保护电路是完全必要的，所以设计了本文介绍的电泵起停控制与多功能保护电路。电路主要由集成件构成。文中扼要介绍的是电泵欠载延时断电保护，过载分级延时断电保护电路，以及欠载停机后延时自动再起动电路。     

基于多体系统动力学的旋翼桨叶响应计算方法

在中等变形梁的基础上引入增广转换矩阵,为解决桨叶动能项推导编程计算较为复杂的问题,建立了一种新的递推计算方法。该方法在原有的转换矩阵基础上进行了增广,建立了相邻运动坐标系间动能项引起的质量、阻尼、刚度和广义力递推计算方法。以法国SA349/2小羚羊直升机的试飞测试数据为依据,验证了方法的有效性。     

发动机进气动态畸变测量系统与数据处理

本文介绍了动态畸变测量系统及其数据处理方法.进一步提高采样频率后可将该系统用于飞机和发动机的研究中.     

浅析发展中国家经济体制的一般特征

本文旨在探讨发展中国家在经济社会发展过程中经济体制的一般特征。认为,发展中国家的经济体制首先是以二元结构为基本特征的,所谓经济发展,就是从传统的农业部门向现代化工业部门的二元结构转变过程;发展中国家经济体制的第二个基本特征是历史上形成的国际性依附结构,经济体制的形成和变革都与此相关;经济体制的第三个特征是混合型经济体制,它与发达国家的混合经济不同,具有超前性和阶段性。     

叉流管－管型换热器二维温度场的数值分析

建立并导出叉流管－管型换热器传热过程的二维数学模型及相应的差分格式,对比实验数据和性能计算结果,表明数值方法是有效可行的。据此编制的计算机程序已成功地用于组合发动机空气预冷换热器工作过程的预测。     

基于Java的CSCW框架及实现研究

通过对目前业已成熟的和正在实施的分布处理系统的对比分析,及深入探析CSCW内在机理及实现机制,本文提出了一个基于WWW的CSCW框架模型,并进一步借助当前的Java语言,构筑了一个相对简单的基于Java的CSCW实现框架JSCW（Java支持的协同工作系统）,从而为进一步研究基于WWW的CSCW系统奠定了基础。     

基于实验设计和响应面模型的风扇转子气动优化设计

针对跨声速风扇动叶中掠、弯结合叶片基于控制点的B样条曲线对积叠线进行参数化,以掠、弯为设计自由度,应用实验设计、三维粘性流场求解、响应面模型及遗传算法对Rotor 67以近尖峰效率工况点为设计点对风扇转子进行了气动优化设计,得到了前掠与弯向旋转方向的复合设计叶片,其总压比有较明显提高。但由于优化是在单一工况点下进行的,其变工况性能不佳。