一种融合MRF分割与数学形态学的道路提取算法

针对高分辨率合成孔径雷达（Synthetic Aperture Radar, SAR）图像中道路目标难以有效提取的问题,提出一种融合马尔可夫随机场（Markov Random Field, MRF）分割与数学形态学处理的高分辨率SAR图像道路提取算法。该算法首先利用直方图均衡化和增强Lee滤波对SAR图像进行预处理,实现道路的边缘增强,抑制相干斑噪声;进而利用基于条件迭代模式（Iterated Conditional Mode, ICM）的MRF对SAR图像中的道路目标进行初分割;再用数学形态学填充空洞,平滑道路边缘;最后,基于道路的几何特征,使用偏心率、矩阵度、复杂度等因子去除虚警,从而提取出道路目标。利用该文算法对两块实际高分辨率SAR图像进行道路目标提取,均可以取得90%以上的正确道路提取率,表明本文算法具有较高的道路提取精度。     

金属微滴水平喷射关键参数调控机制及试验

均匀金属微滴喷射3D打印技术是一种极具应用前景的空间金属增材制造技术,明晰其重力敏感度是实现该技术空间化应用的前提。在地基条件下,将熔滴喷射沉积方向翻转至水平状态是直观反映其打印过程重力效应的有效方法。针对熔滴水平稳定喷射调控的难题,建立了熔滴水平喷射流体力学模型及压电激振动力学模型,通过试验,探究了熔滴水平喷射不稳定形成机制,明晰了不同喷射行为下的激振特性,揭示了熔滴水平稳定喷射调控规律。结果表明：压电模块驱动信号（脉宽、幅值）对激振杆振动特性影响极为显著,激振杆行程随幅值或脉宽的增加呈现出先增加后减小的变化规律;通过改变激振杆振动特性可调控熔滴直径、初始喷射速度及喷射稳定性,熔滴直径随幅值增大而减小,但受脉宽影响不大,而喷射速度与幅值及脉宽均正相关。基于此,试验得到了尺寸均匀的金属熔滴,并水平沉积打印出与设计模型一致的结构特征。     

辐射开环空间绳系机器人编队动力学及控制

提出了一种新型辐射开环空间绳系机器人编队系统,其在编队稳定性、任务灵活性及燃料消耗等方面具有明显的优势。针对辐射开环空间绳系机器人编队系统自旋运动过程中的构型误差控制问题,首先建立了编队系统的自旋动力学模型;然后分析了空间绳系机器人的绳系拉力和空间平台的自旋扭矩对编队系统自旋运动中出现的构型误差的控制能力;设计了一种依靠空间绳系机器人绳系拉力和空间平台自旋扭矩作为控制量,对构型误差进行控制的协调控制方法;最后通过数字仿真进行了校验和分析。仿真结果表明：设计的协调控制方法能够明显改善编队系统自旋运动中构型误差的控制效果。     

含金属相变材料温控组件的研究

研究使用一种含有金属相变材料（Phase Change material,PCM）的温控组件（Thermal Control Component,TCC）对航天器上的有效载荷进行温度控制。通过对载荷的温控需求分析,设计并制备了以Ga-Sn合金为PCM的TCC,并通过地面模拟实验对TCC的温控性能进行测试。实验结果表明这种含有Ga-Sn合金的TCC满足载荷的温控需求。最后在仿真软件中建立了TCC的相变传热仿真模型用于预测TCC的温控性能。结果表明：仿真模型计算所得结果与实验结果基本一致,可用于预测TCC的温控性能。     

自动铺丝用预浸丝制备工艺研究

针对预浸料特点,提出平刀与圆刀2种分切刀具形式。以分切预浸丝束宽度与边缘质量为评价标准,对比了2种刀具形式对预浸料的分切质量,研究了刀具形式、工艺参数对分切质量的影响。结果显示,由于平刀刀片薄,弯曲模量低,易发生弯曲变形,所得预浸丝束宽度稳定性差;同时,由于刃口始终固定、散热性能差,分切过程中刃口处容易发生树脂堆积,使刀片钝化,影响丝束边缘质量,无法实现对预浸料进行高质量连续式分切。而圆刀分切时,由于刀片旋转,刃口不断变化;独特的刀具形式,降低了刀片在分切过程中的侧向移动,使得圆刀分切能够获得宽度均匀,边缘质量良好的自动铺丝用预浸丝束。     

软件故障树分析实例研究

软件故障树分析(SFTA)是硬件或系统FTA的扩展,可应用于安全性关键软件的验证和可靠性分析.本文首先阐述了SFTA的原理和应用过程,然后介绍了结合某嵌入式软件进行实际应用的过程以及最小割集的生成,并在此基础上提出了对该软件的改进建议.     

浅析重庆机场雷暴天气条件下的塔台管制指挥

重庆江北机场周围的地形复杂、空域有限,每年的3月至10月份是雷暴天气的频发期。本文以重庆空管分局塔台管制室的实际运行程序为基础,提出了一些在雷暴天气条件下管制指挥建议,在提高运行效率、降低管制运行风险等方面能起到较大作用。     

风洞模型-支撑系统涡激振动测量与分析

以0.55m×0.4m低湍流航空声学风洞某模型及其支撑系统为研究对象,采用基于加速度传感器直接测量支撑系统和热线间接测量模型尾流相结合的方法,测量并分析了风洞模型-支撑系统的涡激振动模态,给出了测量方案和数据处理方法。采用基于加速度传感器的功率谱分析方法,获得了模型-支撑系统的三阶振动频率分别为31.1、120.9和221.4Hz;采用基于加速度传感器的频域滤波和频域积分方法,提高了有效信号的信噪比,获得了模型-支撑系统振动的振型和振动节点位置;采用热线测量模型尾流分离涡脱落频率的方法,获得了模型一阶和二阶振动的尾流涡激频率分别为31.1和124.1 Hz,并从测量尾流速度脉动量获得了模型振幅变化和抖振边界信息。实验结果表明,采用热线测量模型尾流从而分析模型振动的方法,有利于小尺度的模型振动测量,而且相对于加速度传感器装于模型表面的直接测量方法而言,对试验模型的绕流流场干扰较小,为测量风洞试验模型的涡激振动模态提供了一种方法。     

Fractional order tension control for stable and fast tethered satellite retrieval

The retrieval of a tethered satellite system is intrinsically unstable. This paper develops a new control strategy to retrieve the tethered satellite system stably and quickly using the fractional order control theory. The governing equation of the tethered satellite system and classic linear feedback tension control law were first reviewed and examined as a benchmark. Then, a new fractional order tension control law has been to avoid the tethered satellite winds around the main satellite near the end of retrieval by existing integer order tension control laws. The newly proposed control law has been discretized and implemented by the Laplace transform and Tustin operator. Unlike the existing integer order control laws, which are based on the feedback of current state and memoryless, the fractional order control law has the memory of previous states and thus controls the tether retrieval more smoothly while maintaining the retrieving speed. The effectiveness and advantage of the new fractional order tension control law is demonstrated numerically by comparing with its integer order counterpart. The results show that the new control law not only retrieves the subsatellite without winding around the main satellite, but also provides a better control performance with smaller in-plane libration angles.     

An innovative navigation scheme of powered descent phase for Mars pinpoint landing

Pinpoint landing (within 100 m from the target) is essential for future Mars exploration missions. This paper deals with one aspect of the pinpoint landing architecture—the navigation performance improvement during the powered descent phase, and proposes an innovative navigation scheme to obtain the vehicle complete and accurate states. On the basis of dead reckoning relying on the Inertial Measurement Unit, measurements of the Integrated Doppler Radar are adopted to correct the vehicle velocity and altitude. Distance between the vehicle and one Mars Orbiter as well as their line-of-sight relative velocity is measured by a radio sensor, and integrated in the filter to correct the vehicle horizontal position. The innovative navigation system is based on an Extend Kalman Filter. Two observation schemes are developed. One considers measurements of the Integrated Doppler Radar and radio range measurement. Another further considers radio velocity measurement. The performance of the innovative navigation scheme is greatly influenced by the position of the Mars Orbiter with respect to the target. Stochastic analyses are performed to obtain optimal locations of Mars Orbiter. Finally, the innovative navigation scheme performances are assessed through stochastic simulations. Its performance improvements are demonstrated by comparison with the Integrated Doppler Radar only navigation scheme.